InFocus Projector Work Big In2102 User Manual
Have a look at the manual InFocus Projector Work Big In2102 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 493 InFocus manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
30 Setup menuLanguage: allows you to select a language for the onscreen display.Custom Key: allows you to assign a different function to the Custom but - ton, allowing you to quickly and easily use the effect. Highlight an effect and press Select to choose a different one.Blank Screen: displays an empty screen.Mute: turns off all sound.Aspect Ratio: toggles among 4:3, 16:9, and Native (see page 12 and page 28). Source: cycles through available sources.Auto Image: resets the projector to the source ( page 24). Freeze Screen: pauses the projected image. Source Info: the default effect. It opens a window with projector and source information. Projector Info: opens a window with projector information. Overscan: removes noise around the image.Closed Captions: cycles through caption options.AC Power On: When this feature is on, the projector automatically turns on when electrical power is connected. This allows control of ceiling mounted projectors with a wall power switch.Auto Off Time: automatically turns the projector off after no signals are detected for a preset number of minutes. If an active signal is received before the projector powers down, the image will be displayed. Screen Save Time: automatically blanks the screen with a black color after no signals are detected for a preset number of minutes. The image returns when an active source is detected or a remote or keypad button is pressed. Lamp Low Power: toggles between on and off. Turn it on to lower the light output of the lamp. This also lowers the fan speed, making the projector quieter. Power Sounds: Controls whether the projector makes a sound when pow - ered on and off.Auto Source: When this feature is On, the projector automatically finds the active source, checking the selected Power-up Source first. When this fea - ture is Off, the projector defaults to the source selected in Power-up Source. To display another source, you must manually select one by pressing the Source button on the remote or keypad. Power-up Source: determines which source the projector checks first for active video during power-up.Video Standard: when it is set to Auto, the projector attempts to automati - cally pick the video standard based on the input signal it receives. (The video standard options may vary depending on your region of the world.) If the projector is unable to detect the correct standard, the colors may not look right or the image may appear “torn.” If this happens, manually select a video standard by selecting NTSC, PAL, or SECAM from the Video Stan - dard menu.Closed Captions: (S-video and composite NTSC sources only) turns closed captions on and off (if your source includes closed captions). By default, when you mute the projector, captions are displayed. You can control which captions (if any) should appear when muted or not muted by turning mute on or off, then choosing this menu and selecting CC1 (closed caption 1, the most common channel), CC2, or Off. Setup menu
31 Ceiling Mount: turns the image upside down for ceiling-mounted projec - tion.Rear Project: reverses the image so you can project from behind a translu - cent screen.Prevent PC Screen Saver: prevents your computer from going into Screen Save mode. The projector must be connected to the PC via a USB cable for this feature to work.Startup Screen: allows you to display a blank screen instead of the default screen at startup, and when no source is detected. Take Snapshot...: captures the current image and allows it to be used as the startup screen image. Blank Screen Color: determines what color is displayed when you press the Blank button on the remote.Blank Screen Style: Select Solid, Timer, or Test Patterns. The Timer option is useful for classroom tests or break times during meetings.Show Messages: displays status messages (such as “Searching”) in the lower-left corner of the screen.Menu Offset: allows you to change the position of the On Screen Display items.Menu Transparency: allows you to change how much of the projected image behind the menu you can see. As the value increases, more of the image behind the menu is visible.Magnify Controls: allows you to change the function of the arrow buttons when the menu is not shown. By default, the arrow buttons allow you to advance slides while in PowerPoint’s SlideShow mode. To make the arrow buttons also adjust magnify settings, choose Magnify Controls to turn mag - nify controls on. Now when the menu is not shown, you can press the Select button to switch between the magnification settings (Magnify Level, Mag - nify Horizontal Position and Magnify Vertical Position), then press Select again to turn off magnify controls and use the arrow buttons to advance slides. PIN Protect: The PIN (personal identification number) feature allows you to password protect your projector. Once you enable the PIN feature, you must enter the PIN before you can project an image. The default PIN on this projector is Menu-Arrow Up-Arrow Down-Select-Source. Use the naviga - tion buttons on the remote or keypad to enter the correct 5-button press sequence. When all 5 numbers are entered correctly, press the Select button on the remote or keypad to select OK. If the message “Wrong PIN” appears, verify the code and re-enter it. If you mis-enter a number, you must enter 5 numbers and press the Select button in order to access the “Wrong PIN” message and re-enter the code.To enter the PIN at projector startup:Power up the projector. The “Enter PIN” dialog box appears after the star - tup screen. Enter the PIN. Use the navigation buttons on the remote or key - pad to enter the correct button press sequence. See the description above for instructions. To c h a n g e t h e P I N :Select “Change PIN...” in the Setup menu. Enter the existing PIN. Enter the new PIN. You can navigate between OK and Cancel by pressing the up and down buttons on the keypad. Select OK or Cancel by pressing the Select button. Verify the new PIN.If you lose or forget your custom PIN:Call InFocus Technical Support. Serial Port, Baud Rate: Selects the serial port and baud rate.Serial Port Echo: Controls whether the serial port echoes characters.
32 Status and Service menuSource Info: a read-only display of current source settings.Projector Info: a read-only display of current projector settings.Reset Lamp Hours: resets the lamp hours used counter in the Projector Info menu to zero. Do this only after changing the lamp. Factor y Reset: restores all settings to their default. Service Code: only used by authorized service personnel. Status and Service menu
33 MaintenanceCleaning the lens1 Apply a non-abrasive camera lens cleaner to a soft, dry cloth. Avoid using an excessive amount of cleaner, and don’t apply the cleaner directly to the lens. Abrasive cleaners, solvents or other harsh chemicals might scratch the lens. 2 Lightly wipe the cleaning cloth over the lens in a circular motion. Using the security lockThe projector has a security lock for use with a PC Guardian Cable Lock System. Refer to the information that came with the lock for instructions on how to use it. security lock
34 Replacing the projection lampThe lamp hours used timer in the Projector Info menu counts the number of hours the lamp has been in use. Twenty hours before the lamp life expires, the message “Change lamp” appears on the screen at startup. NOTE: You can order new lamps from www.infocus.com (in select areas), your retailer or your dealer. Only genuine InFocus lamps are tested for use in this projector. InFocus is not liable for the performance, safety or certification of any other lamps. The use of other lamps vio - lates the projector warranty and voids all certification marks on this projector. 1 Turn off the projector and unplug the power cord. 2 Wait 60 minutes to allow the projector to cool thoroughly. 3 Remove the lamp door by (a) removing the screw on the side of the lamp door, (b) sliding the door forward, and (c) lifting the door off. WARNINGS: To avoid burns, allow the projector to cool for at least 60 minutes before you replace the lamp. Only genuine InFocus lamps are tested with this projector. Use of other lamps may cause electrical shock and fire. Unplug the power cord before replacing the lamp. Do not drop the lamp module. The glass may shatter and cause injury. Do not touch the glass lamp screen. Fingerprints can obscure projection sharpness. Lamp hours wait 60 minutes turn off and unplug projector 5X5“5Y 5X5‘5Y 5X5’5Y remove lamp door
35 Be extremely careful when removing the lamp module. In the unlikely event that the lamp ruptures, small glass fragments may be generated. The lamp module is designed to contain most of these fragments, but use caution when removing it. Before replacing a ruptured lamp, clean the lamp compartment and dispose of cleaning materials. Wash hands after lamp replacement. If replacing the lamp while the projector is ceil - ing-mounted, wear protective eyewear. Hg – Lamp contains mercury. Manage in accordance with local disposal laws. See www.lamprecycle.org. 4 A clear plastic lamp shield covers the base of the lamp module. To remove the lamp module, you must access 3 screws underneath this shield. Use a screwdriver to punch through the perforated holes in the shield that cover the screws. Then loosen the two captive screws on one side of the module. Next, remove the 3rd screw on the other side of the module. If there is not a perforated hole above the 3rd screw, use a flat- blade screwdriver to lift the shield enough to gain access to the screw and carefully remove it. Carefully lift out the lamp module. Dispose of the lamp in an environ - mentally proper manner. 5 Install the new lamp module and tighten the screws. 6 Replace the lamp door by sliding it into place and replacing the screw. 7 Plug in the power cord and press the Pow e r button to turn the projector back on. 8 To reset the lamp hour timer, navigate to the Status and Service menu and select Reset Lamp Hours. See page 32 for details. loosen three screws
36 INDEXNumerics12 volt outputs 4 16x9 vs 4x3 12AAdvanced menu 29 Aspect Ratio 12, 28, 30 Audio in 9BBlank Screen 31 Brightness 28 BrilliantColor 29Ccable box 12 cleaning the lens 33 Closed Captions 30 Color 28 Color Space 29 Color Temperature 29 Component video connection 13 Computer connector 9 connecting computer 9 computer monitor 9 external speakers 23 video device 12 connector panel 4 connectors on projector 7, 8 contacting InFocus 21 Contrast 28 Custom key 25, 30 customer service contact information 21 customizing the projector 26 DDVDs 28FFactory Reset 32 focus 11GGamma 29HHDTV 6, 28 Horizontal/Vertical Position 29Iimage optimization 25 size 5Kkeypad buttons 24 Keystone 28 keystone, adjusting 11Llamp hours, resetting 35 Language 30 laptop video port activation 10 LEDs 14MMagnify Controls 31 maintaining the projector 33 Menu button 27 Menu Offset 31 Menu Transparency 31 menu usage 27 Monitor Out connector 9Ooptimizing images 25 optimizing video 26
37 Overscan 29 PPC Screen Saver Off 31 Phase 29 Picture menu 28 PIN 31 positioning the projector 5 Power connector 9 power cord 9 Power Save 30 Power-up Source 30 presentation features 25 Preset 28 projection distance 5 projector connecting computers 9 connecting video devices 12 connector panel 4 customization 26 image size 5 keypad buttons 24 language 30 maintenance 33 menus 27 offset 5 positioning 5 registering 3 reset 32 safety considerations 2 security lock 33 setting up 5 shutting down 14 Status Indicator Panel 14troubleshooting problems 14 RRear 31 registering your projector 3 remote control 22 Replacing the projection lamp 34 resetting the projector 32 RS-232 4SScreen Aspect 12 Screen Save 14, 30 screen triggers 4 security lock 33 Service 32 Service Code 32 Setup menu 30 sharpness 28 shutting down the projector 14 Sources 30 speakers, connecting external 23 Startup Screen 31 Status Indicator Panel 14 S-video connector 13 Sync Threshold 29TTake Snapshot 31 Tint 28 Tracking 29 troubleshooting 14 TV tuner 12UUSB 4, 9
38 VVertical 29 VESA connection 13 video devices, connecting 13 video optimizing 26 Video Standard 30 Volume button 23Wwarranty 21 White Peaking 29Zzoom 11