InFocus Projector Work Big In15 Technical Information Manual
Here you can view all the pages of manual InFocus Projector Work Big In15 Technical Information Manual. The InFocus manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 1
IN1515
Page 2
1 Contents Contents........................................................................... 1 About this manual... .......................................................................................... 2 Operation During Projection .......................................... 3 Image Operations During Projection ................................................................. 3 Adjusting Image Brightness ......................................................................................... 3...
Page 3
2 Replacing the Lamp ........................................................................................ 26 To check the current lamp use time ........................................................................... 26 When to replace the lamp .......................................................................................... 26 Replacing the Lamp ................................................................................................... 27 To replace the lamp...
Page 4
3 Operation During Projection This section explains the various types of operations you can perform while the projector is projecting an image. You can perform the following operations while projecting an image. zImage brightness adjustment zColor mode selection zImage zooming zMomentary cut off of the input source image and projection of a black or blue screen, or a logo zImage freeze zPointer display in the projected image zAspect ratio switching (between 4:3 and 16:9) Adjusting Image Brightness...
Page 5
![Page 5
4
Selecting the Color Mode
You can select from among five different color mode settings to optimize the projected
image in accordance with image contents and projection conditions.
To change the color mode
1Press the [COLOR MODE] key.
zThis displays the color mode selection window. The currently selected color mode is the
one whose button is selected (filled in).
2Use the [T] and [S] keys to move the highlighting to the color mode you want
to select, and then press the [ENTER] key.
zThis will select...](http://img.usermanuals.tech/thumb/2503/90786/w300_infocus-work-big-in15-technical_d-4.png "Page 5
4
Selecting the Color Mode
You can select from among five different color mode settings to optimize the projected
image in accordance with image contents and projection conditions.
To change the color mode
1Press the [COLOR MODE] key.
zThis displays the color mode selection window. The currently selected color mode is the
one whose button is selected (filled in).
2Use the [T] and [S] keys to move the highlighting to the color mode you want
to select, and then press the [ENTER] key.
zThis will select...")
4 Selecting the Color Mode You can select from among five different color mode settings to optimize the projected image in accordance with image contents and projection conditions. To change the color mode 1Press the [COLOR MODE] key. zThis displays the color mode selection window. The currently selected color mode is the one whose button is selected (filled in). 2Use the [T] and [S] keys to move the highlighting to the color mode you want to select, and then press the [ENTER] key. zThis will select...
Page 6
![Page 6
5
Momentarily Cutting Off the Input Source Image
1Press the [BLANK] key.
zThis temporarily cuts off the image from the input source and projects a black screen in
its place.
2To resume projection of the image from the input source, press the [BLANK]
key (or [ESC] key).
Note
You can specify projection of a black screen or blue screen, or a logo. For details, see
“Blank Screen” under “Screen Settings Main Menu” on page 18.
Freezing an Image
Pressing the [FREEZE] key freezes the projected image.
To...](http://img.usermanuals.tech/thumb/2503/90786/w300_infocus-work-big-in15-technical_d-5.png "Page 6
5
Momentarily Cutting Off the Input Source Image
1Press the [BLANK] key.
zThis temporarily cuts off the image from the input source and projects a black screen in
its place.
2To resume projection of the image from the input source, press the [BLANK]
key (or [ESC] key).
Note
You can specify projection of a black screen or blue screen, or a logo. For details, see
“Blank Screen” under “Screen Settings Main Menu” on page 18.
Freezing an Image
Pressing the [FREEZE] key freezes the projected image.
To...")
5 Momentarily Cutting Off the Input Source Image 1Press the [BLANK] key. zThis temporarily cuts off the image from the input source and projects a black screen in its place. 2To resume projection of the image from the input source, press the [BLANK] key (or [ESC] key). Note You can specify projection of a black screen or blue screen, or a logo. For details, see “Blank Screen” under “Screen Settings Main Menu” on page 18. Freezing an Image Pressing the [FREEZE] key freezes the projected image. To...
Page 7
![Page 7
6
Displaying a Pointer in the Projected Image
You can select from among eight different pointer styles, including various arrow styles, for
display in the projected image. Pointers can be used during a presentation to indicate or
highlight a specific part of the image.
Note
Depending on the pointer style you are using, the pointer may not display properly
when you are using keystone correction. If this happens, use the [KEYSTONE +] and
[KEYSTONE –] keys to change the keystone correction value to...](http://img.usermanuals.tech/thumb/2503/90786/w300_infocus-work-big-in15-technical_d-6.png "Page 7
6
Displaying a Pointer in the Projected Image
You can select from among eight different pointer styles, including various arrow styles, for
display in the projected image. Pointers can be used during a presentation to indicate or
highlight a specific part of the image.
Note
Depending on the pointer style you are using, the pointer may not display properly
when you are using keystone correction. If this happens, use the [KEYSTONE +] and
[KEYSTONE –] keys to change the keystone correction value to...")
6 Displaying a Pointer in the Projected Image You can select from among eight different pointer styles, including various arrow styles, for display in the projected image. Pointers can be used during a presentation to indicate or highlight a specific part of the image. Note Depending on the pointer style you are using, the pointer may not display properly when you are using keystone correction. If this happens, use the [KEYSTONE +] and [KEYSTONE –] keys to change the keystone correction value to...
Page 8
![Page 8
7
Press the [ASPECT] key to toggle the aspect ratio of the displayed image between 4:3
and 16:9.
Note
zThe aspect ratio setting affects the projected image only when the input source is
VIDEO or component.
zWhen the input source is a component signal with an aspect ratio of 16:9, the
aspect ratio switches automatically to 16:9. When this happens, pressing the
[ASPECT] key will not change the aspect ratio.
zYou also can change the aspect ratio setting using the setup menu. For details, see
“Aspect...](http://img.usermanuals.tech/thumb/2503/90786/w300_infocus-work-big-in15-technical_d-7.png "Page 8
7
Press the [ASPECT] key to toggle the aspect ratio of the displayed image between 4:3
and 16:9.
Note
zThe aspect ratio setting affects the projected image only when the input source is
VIDEO or component.
zWhen the input source is a component signal with an aspect ratio of 16:9, the
aspect ratio switches automatically to 16:9. When this happens, pressing the
[ASPECT] key will not change the aspect ratio.
zYou also can change the aspect ratio setting using the setup menu. For details, see
“Aspect...")
7 Press the [ASPECT] key to toggle the aspect ratio of the displayed image between 4:3 and 16:9. Note zThe aspect ratio setting affects the projected image only when the input source is VIDEO or component. zWhen the input source is a component signal with an aspect ratio of 16:9, the aspect ratio switches automatically to 16:9. When this happens, pressing the [ASPECT] key will not change the aspect ratio. zYou also can change the aspect ratio setting using the setup menu. For details, see “Aspect...
Page 9
![Page 9
8
Pressing the [FUNC] key displays the menu shown below.
You can use this menu to perform the operations described below.
zAdjust image brightness
Highlight “Brightness” and then press the [ENTER] key.
• This performs the same operation as pressing the [BRIGHT] key ( key) described on
page 3.
zTurn the Eco Mode on or off
Highlight “Eco Mode” and then press the [ENTER] key.
• This performs the same operation as pressing the [ECO] key (
U key) described on
page 7.
zSelect the aspect ratio of the...](http://img.usermanuals.tech/thumb/2503/90786/w300_infocus-work-big-in15-technical_d-8.png "Page 9
8
Pressing the [FUNC] key displays the menu shown below.
You can use this menu to perform the operations described below.
zAdjust image brightness
Highlight “Brightness” and then press the [ENTER] key.
• This performs the same operation as pressing the [BRIGHT] key ( key) described on
page 3.
zTurn the Eco Mode on or off
Highlight “Eco Mode” and then press the [ENTER] key.
• This performs the same operation as pressing the [ECO] key (
U key) described on
page 7.
zSelect the aspect ratio of the...")
8 Pressing the [FUNC] key displays the menu shown below. You can use this menu to perform the operations described below. zAdjust image brightness Highlight “Brightness” and then press the [ENTER] key. • This performs the same operation as pressing the [BRIGHT] key ( key) described on page 3. zTurn the Eco Mode on or off Highlight “Eco Mode” and then press the [ENTER] key. • This performs the same operation as pressing the [ECO] key ( U key) described on page 7. zSelect the aspect ratio of the...
Page 10
![Page 10
9
Configuring Advanced Projector Settings
Your projector has a setup menu that you can use to configure advanced settings.
Displaying the Setup Menu
Pressing the [MENU] key displays the menu shown below in the center of the projection
screen.
Note
You can position the setup menu in the center or on the left edge of the projection
screen. For details, see “Menu Position” under “Option Settings 1 Main Menu” on page
20.
To exit the setup menu
Press the [MENU] key.
Configuring Setup Menu Settings
1Press...](http://img.usermanuals.tech/thumb/2503/90786/w300_infocus-work-big-in15-technical_d-9.png "Page 10
9
Configuring Advanced Projector Settings
Your projector has a setup menu that you can use to configure advanced settings.
Displaying the Setup Menu
Pressing the [MENU] key displays the menu shown below in the center of the projection
screen.
Note
You can position the setup menu in the center or on the left edge of the projection
screen. For details, see “Menu Position” under “Option Settings 1 Main Menu” on page
20.
To exit the setup menu
Press the [MENU] key.
Configuring Setup Menu Settings
1Press...")
9 Configuring Advanced Projector Settings Your projector has a setup menu that you can use to configure advanced settings. Displaying the Setup Menu Pressing the [MENU] key displays the menu shown below in the center of the projection screen. Note You can position the setup menu in the center or on the left edge of the projection screen. For details, see “Menu Position” under “Option Settings 1 Main Menu” on page 20. To exit the setup menu Press the [MENU] key. Configuring Setup Menu Settings 1Press...