InFocus Projector Work Big In1102 User Manual
Have a look at the manual InFocus Projector Work Big In1102 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 493 InFocus manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
1 Declaration of Conformity Manufacturer: InFocus Corporation, 27500 SW Parkway Ave. Wilsonville, Oregon 97070 USA European Office: Louis Armstrongweg 110, 1311 RL Almere, The Netherlands We declare under our sole responsibility that this projector conform to the following directives and norms: EMC Directive 2004/108/EC EMC: EN 55022EN 55024 EN 61000-3-2 EN 61000-3-3Low Voltage Directive 2006/95/EC Safety: IEC 60950-1: 1st Edition Trademarks DisplayLink is a trademark of DisplayLink Corporation.Apple, Macintosh, and PowerBook are trademarks or registered trademarks of Apple Computer, Inc. IBM is a trademark or registered trademark of International Business Machines, Inc. Microsoft, PowerPoint, and Windows are trademarks or registered trademarks of Microsoft Corporation. Adobe and Acrobat are trademarks or registered trademarks of Adobe Systems Incorporated. DLP® and the DLP logo are registered trademarks of Texas Instruments and BrilliantColor™ is a trademark of Texas Instruments. InFocus, In Focus, and INFOCUS (stylized) are either registered trademarks or trademarks of InFocus Corporation in the United States and other countries. FCC Warning Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: --Reorient or relocate the receiving antenna.--Increase the separation between the equipment and receiver. --Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. --Consult the dealer or an experienced radio/TV technician for help.Changes or modifications not expressly approved by InFocus Corporation may void authority to operate the equipment. Canada This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. Agency Approvals UL, cUL Other specific Country Approvals may apply. Please see product certification label. This document applies to regulatory models W1100 and W1102. Input ratings: 100-240Vac, 2.3-0.9A, 50-60Hz InFocus reserves the right to alter product offerings and specifications at any time without notice.
2 Table of Contents Introduction 3 Positioning the projector 5 Projector and device connector guide 6 Connecting a computer source 9 Required computer connections (DisplayLink or VESA) 9 Optional computer connections 9 Displaying an image 10 Adjusting the image 11 Connecting a video device 12 Video device connections 13 Composite video connection 13 S-video connection 13 VESA connection 13 Component video connection 13 Shutting down the projector 14 Troubleshooting your setup 14 Using the remote control 22 Using the audio 23 Using the keypad buttons 24 Optimizing computer images 25 Presentation features 25 Optimizing video images 26 Customizing the projector 26 Using the menus 27 Basic Picture menu 28 Advanced Picture menu 29 Setup menu 30 Status and Service menu 32 Maintenance 33 Cleaning the lens 33 Using the security lock 33 Replacing the projection lamp 34 Important Operating Considerations for Safety •Place the projector in a horizontal position no greater than 15 degrees off axis. • Locate the projector in a well-ventilated area without any obstructions to intake or exhaust vents. Do not place the projector on a tablecloth or other soft covering that may block the vents. • Locate the projector at least 4 (1.2 m) away from any heating or cooling vents. • Only genuine InFocus lamps are tested for use in this projector. InFocus is not liable for the performance, safety or certification of any other lamps. The use of other lamps violates the projector warranty and voids all certification marks on this projector. • Use only the power cord provided. A surge-protected power strip is recommended. • Refer to this guide for proper startup and shutdown procedures. • Hg – Lamp contains mercury. Manage in accordance with local disposal laws. See www.lamprecycle.org. • In the unlikely event of a lamp rupture, particles may exit through the projector side vents. When the projector is turned on, keep people, food, and drinks out of the keep out area under and around the projector, as indicated by the X areas below. Follow these instructions to help ensure image quality and lamp life over the life of the projector. Failure to follow these instructions may affect the warranty. For complete details of the warranty, see the Warranty Booklet. 2’ / 0.6 m 3’ / 1 m
3 Introduction Your new digital projector is simple to connect, easy to use, and straightforward to maintain. It is a versatile projector that is flexible enough for business presentations and home video viewing too. The IN1100 has native XGA 1024x768 resolution, and the IN1102 has WXGA 1280x800 resolution. This guide applies to all products. They are compatible with a wide variety of computers and video devices. Product specifications To read the latest specifications on your multimedia projector, be sure to visit our website at www.infocus.com, as specifications are subject to change. Accessories The standard accessories that came with your projector are listed in the included Quick Start Poster/Booklet. Optional accessories can be found on our website at www.infocus.com or at your retailer or dealer. Online registration Register your projector on our website at www.infocus.com/register to activate your warranty and receive product updates, announcements, and registration incentives. zoom (rear ring) focus (front ring)touch keypad lens remote control receiver (IR) elevator footconnector panel remote control receiver (IR) power cord connectorsecurity lock
4 Connector panel The projector provides the following connectors: •VESA computer •S-video •Composite video • Audio in • USB DisplayLink connector, for computer video input. This USB connection also provides slide advance (and mouse control when used with an optional remote control only) audio in S-video computercomposite video security lock DisplayLink connector
5 Positioning the projector To determine where to position the projector, consider the size and shape of your screen, the location of your power outlets, and the distance between the projector and the rest of your equipment. Here are some general guidelines: • Position the projector on a flat surface at a right angle to the screen. The projector must be at least 4.9 feet (1.5m) from the projection screen. • Position the projector within 10 feet (3m) of your power source and within 6 feet (1.8m) of your video device (unless you purchase extension cables). To ensure adequate cable access, do not place the projector within 6 inches (.15m) of a wall or other object. • Position the projector the desired distance from the screen. The distance from the lens of the projector to the screen, the zoom setting, and the video format determine the size of the projected image. • The image exits the projector at a given angle. IN1100 image offset is 115%; IN1102 image offset is 112.4%. This means that if you have an image 10’ high, the bottom of the image will be 1.5 (IN1100) and 1.24 (IN1102) above the center of the lens. (IN1100) (IN1102)10 ft high image10 ft high image bottom of image 1.24 ft above center of lensProjection angle lens centerbottom of image 1.5 ft above center of lensProjection angle lens center Table 1: (IN1100) Range of distance to the screen for a given screen size Diagonal Screen Size (inches/m) Distance to screen Maximum distance (feet/m) Minimum Distance (feet/m) 60/1.58.6/2.67.8/2.4 80/2.011.5/3.510.4/3.2 90/2.312.9/3.911.7/3.6 150/3.821.5/6.619.5/5.9 Table 2: (IN1102) Range of distance to the screen for a given screen size Diagonal Screen Size (inches/m) Distance to screen Maximum distance (feet/m) Minimum Distance (feet/m) 60/1.57.2/2.26.6/2.0 80/2.09.6/2.98.8/2.7 90/2.310.8/3.39.9/3.0 150/3.818.0/5.516.4/5.0
6 Projector and device connector guide The following illustration and table should help you find the connectors to use and obtain the best resolution possible from your input devices, such as computers, standard VCRs, DVD players (progressive and interlaced), HDTV sources (1080i, 1080p and 720p HDTV formats), TV and satellite tuners, camcorders, video games (progressive and interlaced), and laser disc players. audio in S-video computercomposite video security lock DisplayLink connector
7 Video DeviceVideo CompatibilityIf Your Device Connector Is Attach to Adapter or Labeled Connector on Projector For Setup Instructions, seeComments Standard Broadcast TV (not HDTV) via: cable, digital cable, satellite TV, DVD, or VCR NTSC, PAL, and SECAM formatsComposite video or S-videoVideo 2 or Video 1 Composite video connection on page 13. S-video connection on page 13 Not for progressive (i.e. HDTV) sources. See page 8. Standard Video Camera NTSC, PAL, and SECAM formatsComposite video or S-videoVideo 2 or Video 1 Composite video connection on page 13. S-video connection on page 13 Not for progressive (i.e. HDTV) sources. See page 8. Standard Video Game NTSC, PAL, and SECAM formatsComposite video or S-videoVideo 2 or Video 1 Composite video connection on page 13. S-video connection on page 13 Not for progressive (i.e. HDTV) sources. See page 8.
8 HDTV (High Definition TV) 1080i, 1080p, 720p Component 480i VGA Component video Computer 2 Computer 2 via optional VESA to Component adapter VESA connection on page 13 Component video connection on page 13 Progressive DVD 1080i, 1080p, 720p Component 480p and 480i VGA Component video Computer 2 Computer 2 via optional VESA to Component adapter VESA connection on page 13 Component video connection on page 13 Progressive Video Game 1080i, 1080p, 720p Component 480p and 480i VGA Component video Computer 2 Computer 2 via optional VESA to Component adapter VESA connection on page 13 Component video connection on page 13 Video DeviceVideo CompatibilityIf Your Device Connector Is Attach to Adapter or Labeled Connector on Projector For Setup Instructions, seeComments
9 Connecting a computer source Required computer connections (DisplayLink or VESA) If your computer has Windows XP SP2 or newer*, connect the USB cable between your computers USB port and the projectors DisplayLink connector, then follow the instructions on the screen. See the DisplayLink Manager Users Guide for more information. * For the latest information about support for other operating systems (including Apple), go to www.infocus.com/support/displaylink. Or, connect one end of the provided computer cable to the Computer 2 connector on the projector and the other to the VESA connector on your computer. If you are using a desktop computer, you will need to disconnect the monitor cable from the computer’s video port first. Connect the black power cord to the Power connector on the side of the projector and to your electrical outlet. The Power light on the Status Indicator Panel ( page 14) turns amber. NOTE: Always use the power cord that shipped with the projector. Optional computer connections To get sound from the projector, connect an audio cable (optional cable, not included) to your computer and to the Audio In connector on the projector. You may also need an adapter. To advance slides in a PowerPoint presentation using the remote control, plug the USB cable into the USB mouse connector on your computer and the DisplayLink connector on the projector. MOLEXMOLEX connect USB cable connect power cord connect computer cable connect audio cable