InFocus Projector SP8602 User Manual

20
Image upside downTurn off Ceiling Mount in Setup menu Correct image
Image reversed left to right Turn off Rear Project in Setup menu Correct image
Projected colors don’t match source Adjust color, tint, brightness, contrast in the Basic 
Picture

 menu and/or color space in the Advanced 
Picture menu Correct image
Problem
Solution Result
A
A
COLORCOLOR 

21
The video embedded in my PowerPoint presentation 
does not play on the screenTurn off the internal LCD display on your laptop
Embedded video plays correctly
Lamp won’t turn on, Temperature light is on Make sure vents aren’t blocked, turn the projector off 
and allow it to

 cool for one minute. Lamp turns on
Problem
Solution Result
ABAB
Temperature light
Startup
Screen 

22
Still need assistance?
If you need assistance, visit our support website at www
 .infocus.com/support 
or call us. Check out the How To sectio n for additional information on using 
this projector for home thea ter or gaming applications. 
This product is backed by a limited  warran
 ty. An extended warranty plan 
may be purchased from your dealer. When sending the projector in for 
repair, we recommend shipping the unit in its original packing material, or 
having a professional packaging company...

23
Using the remote control
The remote uses two (2) provided AA batteries. You can install the batteries 
by removing the cover from the remote’s  back, aligning the + and - ends of 
the batteries, sliding them into pl ace, and then replacing the cover.
Caution: 
• When replacing the batteries, be aw are that using 
 batteries other than 
the type provided with  the projector may risk severe damage to the 
remote. When disposing of the batteries, be sure to do so in an 
environmentally proper manner.
•...

24
Using the keypad buttons
Most buttons are described in detail in other sections, but here is an 
overview of their functions:
Power –turns the projector on and off (page 10).
Auto Image –resynchronize the proj ector to the source.
Presets–cycles through the availabl e preset settings (page 27).
Menu–opens the onscreen menus (page 26).
Select –confirms choices made in the menus (page 26).
Up/Down/Left/Right arrows –navigates to and adjusts settings in the menus 
(page 26).
Source –changes the active...

25
Optimizing video images
After your video device is connected properly and the image is on the 
screen, you can optimize the image using the onscreen menus. For general 
information on using the menus, see  page 26.
• Adjust the Keystone, Contrast, Brightness
 , Color, Tint or Sharpness in 
the Basic Picture menu ( page 27).
• Change the Aspect Ratio. Choose the  o
 ption that best fits your input 
source ( page 27 ).
• Adjust the Color Temperature. Select a listed warmth value ( page 28).
• Turn on...

26
Using the menus
To open the menus, press the Menu button on the keypad or remote. (The 
menus automatically close after 60 seconds if no buttons are pressed.) Use 
the arrow buttons to move up and do wn to highlight the desired menu, 
then press the  Select button.
To change a menu setting, highlight it, press  Select, then use the arrow 
buttons to adjust the value or select an  option or turn the feature on or off. 
Press  Select to confirm your changes. Use the arrow buttons to navigate to 
another...

27
Basic Picture menu
To adjust the following settings, highlight the setting, press Select, use the 
arrow buttons to adjust  the values, then press Select to confirm the changes.
Brightness : Changes 
 the intensity of the image.
Contrast : Controls the 
 degree of difference between the lightest and darkest 
parts of the picture and changes the amount of black and white in the 
image.
Sharpness: 
Changes the clarity of the edges of a video image. Select a 
sharpness setting.
Color : Adjusts 
 a video...

28
Advanced Picture menu
BrilliantColor™: Produces an expanded onscreen color spectrum that 
delivers enhanced color saturation fo r bright, true-to-life images. Choose 
Normal Look for most video sources and Bright Look for most computer 
sources.
Iris/DynamicBlack:  
 Select Auto to constantly ad just the aperture based on the 
amount of black in the cu rrent scene, or select a percentage for a fixed 
aperture size (100% is maximum size).
Color Temperature :
  Changes the intensity of the colors....

29
Setup menu
Language: Allows you to select a language for the onscreen display.
Key Click :
 Turns the key click sound on or off. When this setting is on, 
pressing keys on the keypad causes th e projector’s speaker to play a “click” 
sound.
Custom Key : 
 Allows you to assign a differen t function to the Custom button, 
allowing you to quickly and easily us e the effect. Highlight an effect and 
press  Select to choose a different one.
• So
urce Info : The default action. Shows the Source Info menu.
•...