InFocus Projector Lp810 Specifications

							41
APPENDIX
Remote Control Unit
does not work.Check batteries.
Check ALL-OFF switch on Remote Control Unit is set to “ON”.
Make sure nothing is between Infrared Remote Receiver and Remote Control Unit.
Make sure you are not too far from a projector when using Remote Control Unit.
Maximum operating range is 16.4’ (5m).
Check transmitted signal mode from Remote Control Unit.
(See“SETTING” section on page 36.)
Problem:Try these Solutions
Wireless Mouse
function does not
work.Check cable connection between a projector and your computer.
Check mouse setting on your computer.
Turn a projector on before turning on a computer.
This symbol on the nameplate means the product is Listed by Underwriters
Laboratories Inc.  It is designed and manufactured to meet rigid U.L. safety
standards against risk of fire, casualty and electrical hazards.
The CE Mark is a Directive conformity mark of the European Community (EC).
If you still need help after checking the table above, you should call your dealers technical support line and
explain your problem.
If your dealer cannot solve your problem, please call InFocus Corporations Technical Support directly at 
1-800-
799-9911
. Support is free between 6 a.m. and 6 p.m. PST, Monday through Friday. Support is available in North
America after hours and weekends for a fee at 
1-888-592-6800. Or, send us an e-mail at
[email protected].
In Europe, call InFocus in The Netherlands at (31) 20-5792000.
In Asia, call InFocus in Singapore at 
(65) 6353-9449. Or, send us an e-mail at [email protected].
Our World Wide Web address is http://www.infocus.com.
In the event that your unit is determined to be defective, youll be issued a Return Authorization Number.
After youve received this number, send the unit, a copy of your sales receipt, and a description of the problem,
freight prepaid, to Proxima. Clearly note the Return Authorization Number on the outside of the shipping box.
Where to Get Help : 
E 
						

							42
APPENDIX
Multi-media Projector
Accessories
TECHNICAL SPECIFICATIONS
1.3 TFT Active Matrix type, 3 panels
18.5 lbs (8.4 kg)
12.6 x 6.6 x 18.5 (319 mm x 168 mm x 470 mm) 
1024 x 768 dots
2,359,296 (1024 x 768 x 3 panels)
PAL, SECAM, NTSC, NTSC4.43, PAL-M and PAL-N
Up and Down
800 TV lines (HDTV)
INT. SP. Stereo (R and L), 2 watt RMS (T.H.D. 10%)
41 ˚F ~ 95 ˚F (5 ˚C ~ 35 ˚C)
14 ˚F ~ 140 ˚F (-10 ˚C ~ 60 ˚C)
User’s Guide
AC Power Cord
Wireless/Wired Remote Control Transmitter and Batteries
Remote Control Cable
VGA Cable
MAC/VGA Adapter
3 Types Control Cable (For PS/2, Serial and ADB port) 
Protective Dust Cover
Lens Cover
Projector Type
Net Weight
Dimensions (W x H x D)
Panel Resolution
Number of Pixels
Color System
Scanning Frequency
Horizontal Resolution
Built-in Speakers
Operating Temperature
Storage Temperature
LCD Panel System
275 watt typeProjection Lamp
0˚ to 10.5˚Feet Adjustment
Power Source : AA, UM3 or R06 Type x 2
Operating Range : 16.4’ (5m) / ±30˚
Dimensions : 2.2” x 1.3” x 7.6” (55mm x 34mm x 192mm)
Net Weight : 0.36 lbs (165 g) (including batteries)
Laser Pointer : Class IILaser  
(Max. Output : 1mW / Wave length : 650±20nm)
Remote Control Transmitter
480i, 480p, 575i, 575p, 720p, 1035i and 1080iHigh Definition TV Signal
AC 100 ~ 120 V (4.8 A  Max. Ampere), 50 / 60 Hz  (The U.S.A and Canada)
AC 200 ~ 240 V (2.4 A  Max. Ampere), 50 / 60 Hz  (Continental Europe)
Voltage and 
Power Consumption
H-sync. 15 ~ 100 KHz, V-sync. 50 ~ 100 Hz
Motorized Lens Shift
DVI Terminal (Digital), HDB 15-pin Terminal (Analog)
and Stereo Mini Type Jack (Audio)Input 1 Jacks
BNC Type x 5 (G or VIDEO/Y, B or Cb/Pb, R or Cr/Pr, H and V), Stereo Mini
Type Jack (Audio)Input 2 Jacks
RCA Type x 3 (VIDEO/Y, Cb/Pb and Cr/Pr), RCA Type x 2 (Audio R and L)
and DIN 4-pin (S-Video)Input 3 Jacks
DIN 8-pin (Control port), USB port (Series B receptacle)
and Wired Remote JackOther Jacks
Adjustable from 31 to 400Projection Image Size (Diagonal)
F1.7 ~ 2.0 lens with f=48.2 mm ~ 62.6 mm Motor zoom and focusProjection Lens
4.6 (1.4 m) ~ 48.3 (14.7 m)Throw distance
Specifications are subject to change without notice.
LCD panels are manufactured to the highest possible standards. At least 99.99% of the pixels are effective,
however a tiny fraction of the pixels (0.01% or less) may be ineffective by the characteristics of the LCD
panels.
E 
						

							43
APPENDIX
CONFIGURATIONS OF TERMINALS
COMPUTER INPUT-1 TERMINAL (ANALOG)
Terminal : HDB15-PIN 
Connect display output terminal of computer to this terminal with VGA Cable (supplied). When connecting Macintosh
computer, MAC Adapter (supplied) is required.
512341096781514131112
Red Input
Ground (Horiz.sync.)
Green Input
Sense 2
Blue Input
Ground (Red)
Ground (Green)
Ground (Blue)
1
5
2
4
3
6
7
8
+5V Power
Horiz. sync.
Ground (Vert.sync.)
DDC Data
Sense 0
Vert. sync.
DDC Clock
9
13
10
12
11
14
15
Pin Configuration
Terminal : Mini DIN 8-PIN
Connect control port (PS/2, Serial or ADB port) on your computer to this connector with Control Cable (supplied).
12
345876
Pin Configuration
CONTROL PORT CONNECTOR
-----
CLK
DATA
GND
-----
-----
GND
-----
R X D
-----
-----
GND
RTS / CTS
T X D
GND
GND
-----
ADB
-----
GND
-----
-----
-----
GND
PS/2SerialADB
1
2
3
4
5
6
7
8
COMPUTER INPUT-1 TERMINAL (DIGITAL)
Terminal : DVI 24-pin 
Connect display output terminal of computer to this terminal with DVI cable (for Single Link T.M.D.S. / not supplied).  
1917
21018
31119
41220
51321
61422
71523
81624
T.M.D.S. Data2–
No Connect
T.M.D.S. Data2+
No Connect
T.M.D.S. Data2 Shield
DDC Clock
DDC Data
No Connect
1
5
2
4
3
6
7
8
Pin ConfigurationT.M.D.S. Data1–
No Connect
T.M.D.S. Data1+
No Connect
T.M.D.S. Data1 Shield
+5V Power
Ground (for +5V)
Hot Plug Detect
9
13
10
12
11
14
15
16
T.M.D.S. Data0–
No Connect
T.M.D.S. Data0+
No Connect
T.M.D.S. Data0 Shield
T.M.D.S. Clock Shield
T.M.D.S. Clock+
T.M.D.S. Clock–
17
21
18
20
19
22
23
24
Vcc
- Data
+ Data
Ground
1
2
3
4
USB CONNECTOR (Series B)
Pin Configuration
Connect USB port terminal on your computer or peripheral equipment to this connector with USB Cable (not supplied).
2
341
E 
						

							44
E
Limited Warranty

 	


 
 


 

 
 


 

 
 
 
 

 


 
  
 

  
 
 
 


 
   
 








 


!

#













$


%


#

 
 

   
 
  
 &
  


!  
  

 
 






!





()*
(
()&*	)


#
*+






 


!


!
#
%
,

!
!


!










 


!


















%





$








#
Limited  Warranty  Alternatives: -
 
 
 &

 )+  .
 
  
%


/
02 Year Parts and Labor Product Warranty
%


















,











1!
#
01  Year  Parts  Only  Accessory  Warranty
%















!







,










2!
#
090 Day/500 Hour Replacement Lamp Warranty
 %&








!










3
!45!
655



#

	


		
	

		

	
	






		
	
	




 
!  


	

		

		


		
WARRANTY LIMITATION AND EXCLUSION
78
- *((*379-)7-:(78
3:	;-,
						

							45
E
Limited Warranty Period
7&
 


!



!
%






1!


 


!
2!
*
! 


!#7&
 


!

!!

%








!
















#
To Be Eligible For Limited Warranty Coverage
*! 
 +
   
 
 &
  


! 
 
 
 
 

 

 
 
 
  
  

 
 

  
 # 7  

 
 







*
!




#
To Obtain Warranty Service
.

&
 


!

+

&
 


!







2
1

!

@!

D


#

	

-
%2%E55%F44%4422



G#

 


!


















-
	





!

@!
# 



 

 
 
  (

 <

 *

@
 3
 (
&
79 8)78)(
3	:37(*	7
3
7:(7 ;3.)( *39  *((*379 
3 3)B&
B)3	) :( :78)( 
-) -8*&& 3:7 )=	)). 78)
()7;(3:78)*9;(	8*-)(*3.;3.)(3:	
(%
	;) &
*>&) :( -)	
*& 
3.
()	7 
3	
.)37*& :( 	:3-)%
K;)37
*& .*
						

							InFocus Corporation
27700B SW Parkway Avenue
Wilsonville, Oregon 97070-9215
1-800-294-6400 
 503-685-8888
Fax: 503-685-8887 
http://www.infocus.comIn Europe:
Strawinskylaan 585.
1077 XX Amsterdam, The Netherlands
Phone: (31) 20-5792000
Fax: (31) 20-5792999
In Asia:
238A Thomson Road
#18-01/04 Novena Square
Singapore 307684
Telephone: (65) 6334-9005
Fax: (65) 6333-4525
11/2002
610 304 0035  (1AA6P1P3748-- PK3F)Printed in Japan
Part No. 010-0428-00