InFocus Projector Lp260 User Manual

43
APPENDIX
Specifications
The projector must be operated and stored within the tempera-
ture and humidity ranges specified. 
Te m p e r a t u r e
Operating
41 to 95
° F (5 to 35° C)
Non-operating
14 to 140
° F (-10 to 60° C)
Humidity
Operating and non-oper. 80% relative humidity, non-condensing
Dimensions
7.4 x 2.9 x 11.4 inches (18.9 x 7.5 x 29.0 cm)
We i g h t
5.5 lbs. (2.5 kg) unpacked
Altitude
Operating 0 to 7,500 feet (2,286 meters)
Optics
Focus Range 4.6 - 26 feet (1.4-8 m)
Lamp
Type 120-watt or...

44
Appendix
Accessories
NOTE: Use only InFocus-
approved accessories. Other
products have not been tested with
the projector.Standard Accessories 
(ship with the projector) Part Number
Quick Start Card 009-0550-xx
User’s Guide 010-0262-xx
Soft Case 110-0362-00
Shipping Box 110-0365-xx
Power Cord (North American) 210-0195-xx
Power Cord (European) 210-0196-xx
VGA computer cable 210-0200-xx
Composite Video Cable  210-0197-xx
Computer Audio Cable  210-0194-xx
AV Audio Cable 210-0198-xx
S-video Cable...

45
NOTE: You can purchase these 
items by contacting your dealer or 
InFocus Catalog Sales at 
1-800-660-0024. Optional AccessoriesDeluxe Carry Case CA-C161
Executive Leather Case CA-C133
Shipping Case (ATA approved) CA-ATA-260
Deluxe Travel Case CA-C160
Hard Travel Porter Case CA-C142
15’ Mac Extension Cable SP-MAC15
15’ VGA Extension Cable SP-VGA15
Audio/Video Cable SP-AV30
GyroMouse Pro RF Remote Control HW-RF-GPRO
RemotePoint RF Remote Control w Laser Pointer HW-RF-REMLSR
GyroMouse Presenter RF...

46
Appendix
Portable and Laptop Activation Chart
NOTE: Visit our website at
www.infocus.com for the most
current activation chart. It is
located in the Technical Library in
the Service and Support section.
Many laptop computers do not automatically turn on their exter-
nal video port when a projector is connected. Activation com-
mands for some laptop computers are listed in the following 
table. (If your computer is not listed or the given command does 
not work, refer to the computer ’s documentation...

47
Bondwell LCD or CRT options after 
bootupreboot for LCD or CRT 
options to appear
Chaplet** setup screen setup screen
FN-F6 FN-F6
FN-F4 FN-F4
Chembook FN-F6 FN-F6
Commax Ctrl-Alt-#6 Ctrl-Alt-#5
Compaq* ** Ctrl-Alt-< Ctrl-Alt->
FN-F4 FN-F4
automatic automatic
mode/? (for setup option) mode/? (for setup option)
Compuadd* ** automatic automatic
Alt-F for screen setup 
optionAlt-F for screen setup 
option
Data General Ctrl-Alt-Command Ctrl-Alt-Command
Data General 
Wa l k a b o u t2 CRT/X at DOS prompt...

48
Appendix
Grid* ** FN-F2, choose auto or 
simultaneousFN-F2
Ctrl-Alt-Tab Ctrl-Alt-Tab
Hitachi FN-F7 FN-F7
Honeywell FN-F10 FN-F10
Hyundai setup screen option setup screen option
IBM 970* automatic warm reboot
IBM ThinkPad** reboot, enter setup menu FN-F2
FN-F7, select choice from 
setup menu
FN-F1, select choice
FN-F5, select choice
PS/2 SC select choice 
(CRT, LCD, etc.)
Infotel FN-F12 FN-F12
Kaypro boot up, monitor plugged 
inunplug monitor
Kris Tech FN-F8 FN-F8
Leading Edge FN-T FN-T
Mac Portable...

49
Mitsubishi SW2 On-Off-Off-Off SW2 Off-On-On-On
NCR setup screen option setup screen option
NEC* ** setup screen option setup screen option
CRT at the DOS prompt LCD at the DOS prompt
FN-F3 FN-F3
Olivetti* automatic automatic
FN-O/* FN-O/*
Packard Bell* ** FN-F0 FN-F0
Ctrl-Alt-< Ctrl-Alt->
Panasonic FN-F2 FN-F2
Prostar Ctrl-Alt-S at bootup Ctrl-Alt-S at bootup
Samsung* setup screen option setup screen option
Sanyo setup screen option setup screen option
Sharp dip switch to CRT dip switch to LCD
Sun...

50
Appendix
* These manufacturers have models that automatically send video 
to the external CRT port when some type of display device is 
attached.
** These manufacturers offer more than one key command depend-
ing on the computer model.FN-F1 FN-F1
Zeos** Ctrl-Shift-D
FN-F1Ctrl-Shift-D
FN-F1 ComputerKey command to 
activate portKey command to
de-activate port 

51
Using Video Mirroring with a PowerBook Computer
When you turn video mirroring (called SimulScan in newer Pow-
erBooks—see below) on, the projector displays the same informa-
tion that appears on your PowerBook’s built-in screen. When 
video mirroring is off, the projector acts like a separate display.
To turn on video mirroring for the first time:
1Open the Monitors control panel; click on Monitor 2.
2Set the number of colors you want.
3Open the Control Strip, then click on the monitor icon.
4Select...

52
Appendix