InFocus Projector Lp120 User Manual

							LP
®120
PERSONAL PROJECTION. PERFECTED.
USER’S GUIDE
6163IFS_LP120 UG.qxd  4/28/03  3:59 PM  Page 1  
						

							This entire user’s guide is available on the enclosed CD as an Adobe Acrobat pdf file in the following languages: English, French, German, Italian, Norwe-
gian, Portuguese, Spanish, Russian, Japanese, Korean, Traditional Chinese, Simplified Chinese. Before using this projector, pl ease read these instructions. 
Le mode demploi complet est disponible sur le CD joint sous forme de fichier pdf dAdobe Acrobat dans les langues suivantes :  anglais, français, 
allemand, italien, norvégien, portugais, espagnol, russe, japonais, coréen, chinois traditionnel, chinois simplifié. Avant du tiliser ce projecteur, veuillez 
lire ces instructions. 
Die vollständige Benutzeranleitung ist auf der im Lieferumfang enthaltenen CD als Adobe Acrobat PDF-Datei in den folgenden Spr achen verfügbar: 
Englisch, Französisch, Deutsch, Italienisch, Norwegisch, Portugiesisch, Spanisch, Russisch, Japanisch, Koreanisch, Traditionel les Chinesisch und 
Vereinfachtes Chinesisch. Bitte lesen Sie diese Anweisungen vor der Verwendung des Projektors. 
La presente guida è disponibile sul CD allegato, come file Adobe Acrobat pdf, nelle seguenti lingue: inglese, francese, tedesc o, italiano, norvegese, 
portoghese, spagnolo, russo, giapponese, coreano, cinese tradizionale e cinese semplificato. Prima di usare questo proiettore,  leggere le seguenti istruzioni. 
Hele denne brukerhåndboken finnes på den vedlagte CD-en som en Adobe Acrobat pdf-fil på følgende språk: Engelsk, fransk, tysk,\
  italiensk, norsk, 
portugisisk, spansk, russisk, japansk, koreansk, tradisjonell og forenklet kinesisk. Les diss anvisningene før projektoren tas  i bruk. 
Este guia do usuário completo está disponível no CD anexo, como\
 um arquivo pdf do Adobe Acrobat nos seguintes idiomas: inglês,  francês, alemão, italiano, 
norueguês, português, espanhol, russo, japonês, coreano, chinê\
s tradicional, chinês simplificado. Antes de utilizar este proje tor, leia estas instruções. 
Este manual de uso está disponible en su totalidad en el CD incluido, como archivo pdf de Adobe Acrobat, en los siguientes idi omas: inglés, frances, alemán, 
italiano, noruego, português, español, ruso, japonés, coreano, \
chino tradicional, chino simplificado. Antes de usar el proyect or, lea estas instrucciones.
>Zggh_
 jmdh\h^kl\h  ihevah\Zl_ey  \  iheghf  h[t_f_  ij_^klZ\e_gh  gZ  ijbeZ]Z_fhf  dhfiZdl -^bkd_  \  \b^_  pdf-nZceZ  Adobe Acrobat  gZ ke_^mxsbo  
yaudZo : Zg]ebckdhf , njZgpmakdhf , g_f_pdhf , blZevygkdhf , ghj\_`kdhf , ihjlm]Zevkdhf , bkiZgkdhf , jmkkdhf , yihgkdhf , dhj_ckdhf , 
ljZ^bpbhgghf  b  mijhs_gghf  dblZckdhf .  I_j_^  bkihevah\Zgb_f  ijh_dlhjZ , ijhqblZcl_  ^Zggu_  bgkljmdpbb .
 

X
sK   CD
pAdobe Acrobat 
sPDF :	Po
m
\
k	,Ÿ
Z
\
‘
k
I
ƒ
^
s¸(0
sK\
  
 .©
ž(0 1ê
  	.
—¿
_
O(?
„
T
e
Z
\
I



\b
	
\f







 Adobe Ac\bobat (\fDF)  
  
동\b
						

							2
Declaration of ConformityManufacturer: InFocus Corporation, 27500 SW Parkway Ave. Wilsonville, Oregon 
97070 USA
European Office: Strawinskylaan 585, 1077 XX Amsterdam, The Netherlands
We declare under our sole responsibility that the projector conforms to the following 
directives and norms:
EMC Directive 89/336/EEC, Amended by 93/68/EEC
EMC: EN 55022
           EN 55024
 EN 61000-3-2
 EN 61000-3-3
Low Voltage Directive 73/23/EEC, Amended by 93/68/EEC
Safety: EN 60950: 2000 
July, 2002TrademarksApple, Macintosh, and PowerBook are trademarks or registered trademarks of Apple 
Computer, Inc. IBM is a trademark or registered trademark of International Business 
Machines, Inc. Microsoft, PowerPoint, and Windows are trademarks or registered 
trademarks of Microsoft Corporation. Adobe and Acrobat are trademarks or regis-
tered trademarks of Adobe Systems Incorporated. Digital Light Processing is a trade-
mark or registered trademark of Texas Instruments. InFocus and LP are trademarks 
or registered trademarks of InFocus Corporation. FCC WarningThis equipment has been tested and found to comply with the limits for a Class A 
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to pro-
vide reasonable protection against harmful interference when the equipment is oper-
ated in a commercial environment. This equipment generates, uses, and can radiate 
radio frequency energy and, if not installed and used in accordance with the instruc-
tion manual, may cause harmful interference to radio communications. Operation of 
this equipment in a residential area is likely to cause harmful interference in which 
case the user will be required to correct the interference at his own expense.
CanadaThis Class A digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada.Remote Control WarningLaser radiation class II product; wavelength 650nm; maximum output 1mW. Remote 
control complies with applicable requirements of 21 CFR 1040.10 and 1040.11. 
Remote control complies with applicable requirements of EN 60 825-1: 1994 +A11.
Do not look into the laser beam emitted
from the top of the remote control. 
						

							3 Table of Contents
Introduction 5
Connecting a computer  6
Required computer connections  6
Displaying a computer image  7
First-time projector use with Windows 98  8
Adjusting the image  10
Connecting a video device  11
Displaying a video image  12
Shutting down the projector  14
Troubleshooting your setup  14
Using the keypad buttons  22
Using the remote control  23
Using the audio  24
Optimizing computer images  25
Presentation features  25
Optimizing video images  26
Customizing the projector  26
Using the menus  27
Picture menu  28
Settings menu  31
Maintenance 34
Cleaning the lens  34
Replacing the projection lamp  35
Appendix 37
Accessories 37
Red LED behavior and projector errors  38
If you are experienced in setting up presentation systems, use the Quick Set 
Up card that was included in the box. For complete details on connecting 
and operating the projector, refer to this User ’s Guide. Electronic versions of 
this User ’s Guide in multiple languages are available on the included CD 
and on our website.
The website also has technical specifications (an interactive image size cal-
culator, laptop activation commands, connector pin outs, a glossary, the 
product data sheet), a web store to buy accessories, and a page for online 
registration. See the inside of the back cover for a list of all contact numbers 
and relevant web addresses.
Important Operating Considerations
Do not place the projector on a tablecloth or other soft covering that may 
block the vents. Intake vents are placed along the left, front and back sides 
of the projector.
 Exhaust vents are placed along the right side of the projec-
tor. In the unlikely event that the lamp ruptures, discard any edible items 
and thoroughly clean the area along the right side of the projector.
2 ft (.6m) Do not place objects in the area along the right side of the projector 
						

							4 
						

							5
IntroductionYour new digital projector packs great performance into a shape and size 
customized for the mobile professional. It fits comfortably in your laptop 
bag then transitions easily into your presentation environment. It is easy to 
connect, easy to use, and easy to maintain. The InFocus Interactive Display 
on the top of the projector gives you constant feedback on the status of the 
projector.
 
Projector components and features
 documentation remote
computer
cableprojector
power
cableaudio cable adapter
audio cable
S-video cable S-video to composite adapter
protective sleeve
accessory pouch lens cap*
* the lens cap with tether ships in the accessory pouch. Insert the tether into the small 
hole under the lens when you unpack your projector.SCART adapter
keypad
connectors
elevator foot release
zoom
focus
Interactive display
lens cap
IR receiver
for remote
computers-video
audio
power cord 
						

							6
Connecting a computerRequired computer connectionsConnect the black end of the computer cable to the Computer in connector 
on the projector. Connect the blue end to the video (VGA) port on your com-
puter. If you are using a desktop computer with a single VGA port, you first 
need to disconnect the monitor from that computer ’s video port. 
Connect the black power cable to the connector on the side of the projector 
and to your electrical outlet.
The Power LED on the projector ’s keypad turns solid green and the fans 
start to run.
NOTE: Always use the power cable that shipped with the projector. Optional computer connectionsTo advance slides in a PowerPoint™ presentation using the remote, plug the 
USB connector on the computer cable into the USB mouse connector on 
your computer. USB drivers must be installed to use the USB feature. For 
more information, see page 9.
To have sound with your presentation, connect the audio cable to your com-
puter and to the computer Audio In connector on the projector. 
connect computer cable connect power cableconnect USB portion ofcomputer cableconnect audio cable 
						

							7
Displaying a computer image Remove the lens cap.
Press the Pow e r button on the top of the projector.
The LED flashes green and the Interactive Display illuminates and counts 
down the time to image display. When the lamp comes on, the startup 
screen is displayed and the LED is steady green. It can take a minute for the 
image to achieve full brightness. 
? No startup screen? Get help on page 15. 
Turn on your computer.
The computer ’s image should appear on the projection screen. If it doesn’t, 
press the Source button on the projector ’s keypad. 
Make sure your laptop’s external video port is active. 
Many laptops do not automatically turn on their external video port when a 
projector is connected. Refer to your computer ’s documentation to learn the 
activation commands specific for your computer. For example, some lap-
tops use a key combination of FN + F5 to turn the external display on and 
off. 
? No computer image? Try pressing the Auto Image 
button on the keypad. Get help on page 16. 
remove lens cappress Powerturn on computer
source
activate laptop’s external port 
						

							8
First-time projector use with Windows 98The first time you connect a computer running Windows 98 to the projector, 
the computer recognizes the projector as “new hardware” and the Add 
New Hardware Wizard appears. Follow these instructions to use the Wiz-
ard to load the correct driver (which was installed with your Windows 
operating system).
If you are running Windows 2000, Windows ME, or Windows XP, skip these 
steps and go to “Adjusting the image” on page 10.aClick Next to begin searching for the driver.bMake sure “Search for the best driver” is selected, then click Next.cUncheck any checked boxes, then click Next. Windows automatically 
locates the driver. If this driver has been removed, reload the driver using 
your Windows operating system CD.dWhen Windows finds the driver, you are ready to install it. Click Next.
abcd