InFocus Projector Learn Big In3104ep Quickstart Manual

IN3102   IN3104   IN3106
Quick Start
Regulatory models W3220, W3240 and W3260

English - for other languages, see booklet
Français – voir la brochure
Deutsch – siehe Broschüre
Español – ver folleto
Italiano – vedi opuscolo
Nederlands – zie boekje
Português – consulte livreto
Svenska – se häftet
Русский – см. буклет
한국어 – 소책자참조
中文（简体）– 见手册

P/N 36.8AU04G001-A 

Please  read  the  safety  instructions  booklet  before  setting  up 
the projector.
1
2
Unpack the box
Here's what's included: 
Put batteries in the remote
The remote uses 2 AA batteries.
Please dispose of batteries in an environmentally proper manner.
Buy a Full-Featured Remote and Other Custom Accessories
www.infocus.com/store

The  top  of  your  projector  includes  a  convenient 
indicator panel with symbols that light up to show 
important status.
For details, see Troubleshooting.
Status...

3
Connect source
Color-coded connections make it easy.
You can connect more than one source if needed.
Got an Apple computer?You may need an adapter. For more information, see How-To Guides at www.infocus.com/support/howto
Connect to: Computer (using DisplayLink)
Connect to: DVD, VCR
1 Connect video using either an S-Video or a Composite Video cable  www.infocus.com/store part no. SP-SVIDEO-10M or SP-CPSTVID-5M
2 Connect video using an HDMI Cable
  Available from A/V dealer or retailer
3 Connect audio...

4Turn on projector and source
1  Connect the power cord to the projector 
and to an electrical outlet
The power light   on the projector will light amber.
2  Remove the lens cap
3  Turn on the projector
Touch the power light (or press power on the remote).
The power light will start blinking green.
4  Wait for the lamp to warm up
After a few seconds, the power light will stop blinking, and the 
other buttons on the keypad will light up. It can take a minute 
for the lamp to reach full brightness....

Adjust the picture
1  Height
1    Hold down the release button 
under the front of the projector.
2    Lift the front of the projector to 
the desired height.
3    Release the button.
2   Keystone
Press the keystone buttons to 
make the picture square.
3   Zoom and focus
Adjust zoom fi  rst, then focus the 
center of the image.
Projector Location
Zoom 
(rear)
Focus 
(front)
As distance increases, the 
image gets larger and moves 
upwards.

Lens center line
Diagonal
Screen Size Distance to Screen
Minimum...

6
7
Using the menus
1  Press menu, then press  or  to review menus.
2  Press select to enter a menu, then press  or  to review settings.
3  Press select to change a setting. If this shows more choices, press 
 or  to update the setting, then press select or menu to save it.
4  Press menu to go back. Press it again to remove the menu.
Note: Most picture settings are disabled (gray) unless a source is being displayed.
Controlling your presentations
Connect the USB cable between your computer and the...

If there is no picture or the picture is blank
If the power light is off, make sure the power cord is connected and plugged into 
a live electrical outlet. If the power light is amber and not blinking, touch the 
power light (or press power on the remote).
Check video source and cables. Make sure the video source (computer, DVD 
player, VCR, etc.) is turned on and cables are securely connected between the 
source and the projector. 
If your computer is connected using DisplayLink (not VGA), please see...

Questions? We’re here to help!
Visit us at:
www.infocus.com/support
We’re here to support you with your new purchase. We can help you with…
•  Determining screen sizes
•  Documentation in other languages
•  Connecting your sources (TV, DVD, Cable/Satellite, Game, etc.)
•  Selecting optional accessories
•  Product warranty protection plans
USA, Canada, Latin America
Customer Support Telephone
+1 (503) 685-8888
TOLL FREE: 800-799-9911
Mon-Fri, 7 am - 5 pm Pacific
[email protected]
Asia...