InFocus Projector In3114 Quickstart Manual

							S-Video Cable
12 4
1    Connect the power cord to the projector
       and to an electrical outlet
3    Turn on the projector
4    Wait for the lamp to warm up
5    Turn on computer or other source
6    Change source if needed
The power light       on the projector will light amber.
Touch the power light (or press power on the remote).
The power light will start blinking green.
After a few seconds, the power light will stop blinking and 
turn green. It can take a minute for the lamp to reach 
full brightness.
If needed, press source (on the projector or remote) to view 
the source. You may have to press it more than once.
You may need to press a specific key combination to activate
your laptops external video port. On most laptops, hold down
the FN key while pressing a key labeled CRT/LCD, LCD/VGA,
a monitor icon       , or similar. Key combos for popular models:
Warning: Do not look directly into the lens
while the projector is being used.
Important: If there is still no video, restart your
computer (first make sure its connected to the
projector and the projector is turned on).
Apple  F7
Dell  Fn+F8
Fujitsu Fn+F10 Sony Fn+F7
Toshiba Fn+F5
HP/Compaq Fn+F4 or Fn+F6
IBM ThinkPad Fn+F7
Turn on projector and source
Unpack the box
Heres whats included:
Put batteries in the remote
The remote uses 2 AA batteries.
Connect source
Color-coded connections make it easy.
You can connect more than one source if needed.
Projector
Computer Cable
Save the box and packing materials.Remote
Power Cable
The top of your projector includes 
a convenient indicator panel with 
symbols that light up to show 
important status.
For details, see Troubleshooting.
USB Cable
Regulatory model M3100
Status Indicator Panel
3
TURN OVER
2    Slide open the lens cover
Please read the safety instructions booklet before setting up the projector.
i
Audio Out
L                  RVideo
OutHDMI  Out
Carry Case
Connect to:  Computer (using Di splayLink)
USB Cable (included)
Computer
For Windows and Macintosh
Connect the USB cable between your 
computer and the projectors DisplayLink 
connector. See the DisplayLink Software 
Users Guide for details on setup, 
compatibility, features, and
troubleshooting; download it at 
www.infocus.com/support/displaylink
OR
OR
Computer Cable (included)
Computer
Connect to:  DVD, VCR
1Connect video using an  HDMI cable
 
or a
 
Composite Video cable
 
www.infocus.com/store part no. SP-HDMI-10M-R or SP-CPSTVID-5M or SP-SVIDEO-10M2
 Connect audio using a  Mini Plug Audio Y-Cable (not needed for HDMI)    Available from A/V dealer or retailer
Got an Apple computer?
You may need an adapter. For more 
information, see How-To Guides at 
www.infocus.com/support/howto
OR
Connect to:
 Other kinds of sources
How-To Guides are available at www.infocus.com/support/howto
Connect to: Computer (using VGA)
Power/Standby
Service Required
High Temperature Replace Lamp
5-10 sec.
source
S-Video Out
or an S-Video cable
!
2 3
1
Please dispose of batteries in an environmentally proper manner.
Buy a Full-Featured Remote and Other Custom Accessories
www.infocus.com/store
Complete laptop activation chart at www.infocus.com/support
Quick Start Guide English 
For other languages, see booklet
–
Français – voir la brochure
Deutsch – siehe Broschüre
Español – ver folleto
Italiano – vedi opuscolo
Nederlands – zie boekje
Português – consulte livreto
Svenska – se häftet
 – . 
한국어 –소책자 참조
Mini Plug Audio Y-Cable
(not needed for HDMI) Composite Video Cable
HDMI Cable
DVD or VCR*
 
B
est
   Good
OR
*Also for game console, cable box,
HDTV Receiver
010-0736-00 *010-0736-00*
  B
etterOR 
						

							Projector Location
5
4
67
1    Height
2    Keystone
3    Zoom and focus
View photos from a USB flash drive
1 Hold down the release button 
under the front of the projector.
2  Lift the front of the projector to the desired height.
3  Release the button.
1 Press  menu, then press      or      to review menus. 
2  Press select to enter a menu, then press      or      to review settings.
3  Press select to change a setting. If this shows more choices, press
       or      to update the setting, then press select or menu to save it.
4  Press menu to go back. Press it again to remove the menu.
Press the keystone buttons to
make the picture square.
Adjust zoom first, then focus the
center of the image. To flip the image, turn on the Ceiling Mount setting in the Setup menu.
Using the menus
Ceiling mount?
Adjust the picture
Use LitePort Source
Turn off the projector
READ THE REFERENCE GUIDE
As distance increases, the
image gets larger and
moves upwards.
We’re here to support you with your new purchase. We can help you with…
•  Determining screen sizes
•  Documentation in other languages
•  Connecting your sources (TV, DVD, Cable/Satellite, Game, etc.)
•  Selecting optional accessories
•  Product warranty protection plans
Hg - Lamp contains mercury. Manage in accordance with local disposal laws.
See www.lamprecycle.org 
   
Declaration of Conformity
Manufacturer: InFocus Corporation, 27500 SW Parkway Ave. Wilsonville, Oregon 97070-8238 USA
We declare under our sole responsibility that this projector conforms to the following directives and norms: EuP Directive: 2005/32/EC, 
EMC Directive 2004/108/EC, EMC: EN 55022, EN 55024, EN 61000-3-2, EN 61000-3-3, Low Voltage Directive 2006/95/EC, Safety: IEC 
60950-1:2005(MOD).
Trademarks
DisplayLink is a trademark of DisplayLink Corporation.
Apple, Macintosh, and PowerBook are trademarks or registered trademarks of Apple Computer, Inc. IBM is a trademark or registered 
trademark of International Business Machines, Inc. Microsoft, PowerPoint, and Windows are trademarks or registered trademarks of 
Microsoft Corporation. Adobe and Acrobat are trademarks or registered trademarks of Adobe Systems Incorporated. DLP® and the DLP 
logo are registered trademarks of Texas Instruments and BrilliantColor™ is a trademark of Texas Instruments. InFocus, In Focus, and 
INFOCUS (stylized) are either registered trademarks or trademarks of InFocus Corporation in the United States and other countries.  
FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause 
harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired 
operation. 
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC 
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This 
equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, 
may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular 
installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the 
equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications to this equipment that are not expressly approved by InFocus Corp. may void the user’s authority to operate 
the equipment.
Canada
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
Agency Approvals
cMETus. Other specific Country Approvals may apply. Please see product certification label.
Input ratings:  100-240Vac, 2.9A, 50-60Hz
InFocus reserves the right to alter product offerings and specifications at any time without notice.
USA, Canada, Latin America
Customer Support Telephone
+1 (503) 685-8888
TOLL FREE: 800-799-9911
Mon-Fri, 6 am – 5 pm Pacific
[email protected] Asia Pacific
Customer Support Telephone
Singapore: 800-101-1864
China: 800-828-2268
Australia: 1800-630-957
Australia Direct Sales: 1800-885-841
New Zealand: 0800-449-854
Mon-Fri, 9 am - 5 pm SGT
[email protected]
Copy JPEG pictures to a USB flash drive, then plug the drive 
into the projector’s LitePort connector. The slideshow starts 
automatically. Press arrow keys to change slides, press select 
to see thumbnails and change folders, press select again to 
return to the slideshow.
  TROUBLESHOOTING
If there is no picture or the picture is blank
 
If the power light is off, make sure the power cord is connected and plugged 
into a live electrical outlet. If the power light is amber and not blinking, touch 
the power light (or press power on the remote).
  Check video source and cables. Make sure the video source (computer, DVD 
player, VCR, etc.) is turned on and cables are securely connected between the 
source and the projector.
  If your computer is connected using DisplayLink (not VGA), please see the 
DisplayLink Manager User's Guide for more troubleshooting information.  
  Make sure your computers video port is enabled. Press the key combination 
that activates your laptop's external video port (see step       ). If there is still no 
image, restart your laptop. 
  Press the Source button. You may need to press it several times to view the 
correct source.
  Press the Auto Image button.
If Signal out of range is shown, or the picture looks bad
  Press the Auto Image button. If that doesn't help (and the source is a computer), 
reduce your computer's display resolution or vertical refresh rate. 
If the replace lamp light is on
  Turn the projector off and wait at least one minute, then turn it on again. If the 
replace lamp light turns on again, the lamp needs to be replaced. For lamp 
replacement instructions, see the Reference Guide, which can be downloaded at
  Only InFocus genuine lamps are tested for use in this projector.
If the high temperature light is on
 Turn the projector off and remove anything that may be blocking the air vents 
on its side. Leave the projector off for at least one minute to let it cool before 
turning it on again. Important: Continuous operation at high temperature may 
reduce the lifetime of the lamp and/or projector. 
If the service required light is on
 Turn the projector off and wait at least one minute, then turn it on again. If the 
service required light turns on again, the projector needs to be serviced. See 
below for service contact information. 
More troubleshooting options  are in the Reference Guide
                 Warning: In the unlikely event of a lamp rupture, particles may be ejected from the 
projector. Keep out of the area under and around the projector while the projector is in use.  
 See the safety instructions booklet for more details.
 
Diagonal
Screen Size  Distance to Screen
Minimum        Maximum
60" / 1.5m
80" / 2m
90" /2.286m
150" / 3.8m 6.48’ / 1.98m
8.64’ / 2.63m
9.72’ / 2.96m
16.20’ / 4.94m 7.80’ / 2.38m
10.40’ / 3.17m
11.70’ / 3.57m
19.50’ / 5.94m
source
Controlling your presentations
Connect the USB cable between the projector and your computer (see step       ),
then press       and      to move through your presentation slides.  
Note: You don’t need to install DisplayLink Manager software to use this feature.
Questions? We’re here to help!
Press the power button
The power light on the projector will blink while the fan cools 
the lamp. If you need to unplug the projector, wait until the 
fan stops and the power light stops blinking and stays on. 
Note: While the power light is blinking, button presses on the 
projector and remote are ignored.
The Reference Guide is available in multiple languages. It covers advanced setup and 
operation, including instructions for LAN/network functions and lamp replacement.
Lens center line
Zoom 
(rear)
focus
(front)
3
Note: Most picture settings are disabled (gray) unless a source is being displayed.
Download it at www.infocus.com/support
Europe, Middle East, Africa
Customer Support Telephone
France: 0800 905-993
Germany: 0800 181-3649
Italy: 0800 877-238
Spain: 900 993-163
UK: 0800 028-6470
Other: 008000 463-6287
Mon-Fri, 08:00 - 17:00 CET
[email protected]
60" / 1.5m
80" / 2m
90" / 2.286m
150" / 3.8m 6.21’ / 1.89m
8.34’ / 2.54m
9.40’ / 2.86m
15.77’ / 4.81m 7.74’ / 2.36m
 10.36’ / 3.16m
 11.68’ / 3.56m
19.55’ / 5.96m
IN3114
IN3116
Interactive Screen Size and
Distance Calculator
www.infocus.com/calculator
Visit us at:  www.infocus.com/support
Download it at www.infocus.com/support
www.infocus.com/support
Buy a Screen and Other Accessories www.infocus.com/store
Need Help?
Press the Help button at any 
time to get help with connect-
ing sources and improving 
the picture.
1 2