InFocus Projector IN3102 User Manual

30
Advanced Picture menu
BrilliantColor™: produces an expanded on-screen color spectrum that 
delivers enhanced color saturation for bright, true-to-life images. Choose 
Normal Look for most video sources and Bright Look for most computer 
sources.
White Peaking: (video sources only) increases the brightness of whites that 
are near 100%.
Color Temperature: changes the intensity of the colors. Select a listed relative 
warmth value.
Force wide: when this is off, the analog locking algorithms choose the...

31
Setup menu
Language: allows you to select a language for the onscreen display.
Key Click: turns the key click sound on or off. When this setting is on, 
pressing keys on the keypad causes the projector’s speaker to play a “click” 
sound.
Custom Key: allows you to assign a different function to the Custom button, 
allowing you to quickly and easily use the effect. Highlight an effect and 
press Select to choose a different one.
•Source Info: the default action. Shows the Source Info menu.
•Projector...

32
contains captions on the selected channel, then the projector must display 
caption text overlaid on the image.
Ceiling Mount: turns the image upside down for ceiling-mounted projection.
Rear Project: reverses the image so you can project from behind a 
translucent screen.
Auto Keystone: automatically adjusts vertical image.
Prevent PC Screen Saver: prevents your computer from going into Screen 
Save mode. The projector must be connected to the PC via a USB cable for 
this feature to work.
Search...

33
Status and Service menu
Source Info: a read-only display of current source settings.
Projector Info: a read-only display of current projector settings.
Reset Lamp Hours: resets the lamp hours used counter in the Projector Info 
menu to zero. Do this only after changing the lamp.
Factory Reset: restores all settings to their default.
Service Code: only used by authorized service personnel.
Status and Service menu 

34
Maintenance
Cleaning the lens
1Apply a non-abrasive camera lens cleaner to a soft, dry cloth.
• Avoid using an excessive amount of cleaner, and don’t apply the 
cleaner directly to the lens. Abrasive cleaners, solvents or other harsh 
chemicals might scratch the lens.
2Lightly wipe the cleaning cloth over the lens in a circular motion.
Using the security lock
The projector has a security lock for use with a PC Guardian Cable Lock 
System. Refer to the information that came with the lock for...

35
Replacing the projection lamp
The Lamp Hours timer in the Projector Info menu counts the number of 
hours the lamp has been in use. Twenty hours before the lamp life expires, 
the message “Replace lamp” appears on the screen at startup.
•NOTE: Be sure to use the InFocus lamp module designed for this 
projector. You can order new lamps from www.infocus.com (in select 
areas), your retailer or your dealer. Only genuine InFocus lamps are tested 
for use in this projector. Use of non InFocus lamps may...

36
4Loosen the captive screws that attach the lamp housing to the projector. 
Carefully remove the lamp housing. Dispose of the lamp in an 
environmentally proper manner.
5Install the new lamp module and tighten the screws.
6Replace the lamp door by sliding it into place.
7Plug in the power cord and press the Power button to turn the projector 
back on.
8To reset the lamp hour timer, navigate to the Status and Service menu and 
select Reset Lamp Hours (
page 33).
loosen screw 

37
INDEX
Numerics
16x9 vs 4x3 12
5 volt DC output 4
A
AC Power On 30
Advanced menu 29
Apply Preset 28
Aspect Ratio 12, 28, 30
Audio In Computer connector 9
Audio In connector 13
Audio Out connector 23
Auto Image 30
Auto Off Time 30
Auto Source 30
B
Blank Key 30
Blank Screen 30
Brightness 28
BrilliantColor 29
Ccable box 12
Ceiling Mount 30
Cleaning the lens 33
Closed Captions 30
Color Space 29
Color Temperature 29
Computer In connector 9
Connecting
external speakers 23
computer 9
video device 12
Connector...

38
Overscan 29, 30
PPhase 29
Picture menu 28
Power connector 9
power cord 9
Power Sounds 30
Power-up Source 30
Presentation features 25
Projection distance 5
Projector
Connector panel 4
Customization 26
Image Size 5
keypad buttons 24
Maintenance 33
menus 27
offset 5
Registering 3
security lock 33
Status indicator panel 14
connecting computers 9
connecting video devices 12
positioning 5
setting up 5
shutting down 14
troubleshooting problems 14
Projector Info 30
RRear 31
Registering your projector 3
remote...