InFocus Projector In26 User Manual
Have a look at the manual InFocus Projector In26 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 493 InFocus manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
1
Declaration of ConformityManufacturer: InFocus Corporation, 27700B SW Parkway Ave. Wilsonville, Oregon
97070 USA
European Office: Strawinskylaan 585, 1077 XX Amsterdam, The Netherlands
We declare under our sole responsibility that this projector conform to the following
directives and norms:
EMC Directive 89/336/EEC, Amended by 93/68/EEC
EMC: EN 55022
EN 55024
EN 61000-3-2
EN 61000-3-3
Low Voltage Directive 73/23/EEC, Amended by 93/68/EEC
Safety: IEC 60950-1: 1
st Edition
March, 2006TrademarksApple, Macintosh, and PowerBook are trademarks or registered trademarks of Apple
Computer, Inc. IBM is a trademark or registered trademark of International Business
Machines, Inc. Microsoft, PowerPoint, and Windows are trademarks or registered
trademarks of Microsoft Corporation. Adobe and Acrobat are trademarks or
registered trademarks of Adobe Systems Incorporated. InFocus, In Focus, and
INFOCUS (stylized) are either registered trademarks or trademarks of InFocus
Corporation in the United States and other countries.
FCC WarningNote: This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
--Reorient or relocate the receiving antenna.
--Increase the separation between the equipment and receiver.
--Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
--Consult the dealer or an experienced radio/TV technician for help.CanadaThis Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.Agency ApprovalsUL, cUL, TUVOther specific Country Approvals may apply. Please see product certification label. This document applies to: IN24, W240, IN26, and W260. InFocus reserves the right to alter product offerings and specifications at any time
without notice.
2 Table of Contents Introduction 3 Positioning the projector 5 Projector and device connector guide 6 Connecting a computer source 9 Required computer connections 9 Optional computer connections 9 Displaying an image 10 Adjusting the image 11 Connecting a video device 12 Video device connections 13 Composite video connection 13 S-video connection 13 VESA connection 13 Component video connection 13 Shutting down the projector 14 Troubleshooting your setup 14 Using the remote control 22 Using the audio 23 Using the keypad buttons 24 Optimizing computer images 25 Presentation features 25 Optimizing video images 26 Customizing the projector 26 Using the menus 27 Picture menu 28 Advanced menu 29 Settings menu 31 Maintenance 35 Cleaning the lens 35 Replacing the projection lamp 35 Using the security lock 37 Important Operating Considerations for Safety Place the projector in a horizontal position no greater than 15 degrees off axis. Locate the projector in a well-ventilated area without any obstructions to intake or exhaust vents. Do not place the projector on a tablecloth or other soft covering that may block the vents. Locate the projector at least 4 (1.2 m) away from any heating or cooling vents. Use only InFocus-approved ceiling mounts. Use only the power cord provided. A surge-protected power strip is recommended. Refer to this guide for proper startup and shutdown procedures. This product has a lamp which contains a very small amount of mer - cury. Wash hands after cleaning the area and handling the ruptured lamp. Dispose of it as required by local, state or federal ordinances and regulations. For more information see www.eiae.org. In the unlikely event of a lamp rupture, particles may exit through the projector side vents. When the projector is turned on, keep people, food, and drinks out of the keep out area under and around the pro - jector, as indicated by the X areas below. Follow these instructions to help ensure image quality and lamp life over the life of the projector. Failure to follow these instructions may affect the warranty. For complete details of the warranty, see the Warranty booklet. 5’/1.5m 8’/2.4m 2’/0.6m 3’/1m 3’/1m
3 IntroductionYour new digital projector is simple to connect, easy to use, and straightfor - ward to maintain. It is a versatile projector that is flexible enough for busi - ness presentations and home video viewing too. The IN24 has native SVGA 800x600 resolution while the IN26 has native XGA 1024x768 resolution. This guide applies to both products. They are compatible with a wide variety of computers and video devices, including: IBM-compatible computers, including laptops, up to 1024x768 resolu - tion for the IN24 and 1400x 1050 for the IN26. Apple ® Macintosh ® and PowerBook ® computers up to 1024x768 reso - lution for the IN24 and 1400x 1050 for the IN26. Most standard VCRs, DVD players (progressive and interlaced), pro - gressive DVD, HDTV sources, TV and satellite tuners, camcorders, video games, and laser disc players. Product specificationsTo read the latest specifications on your multimedia projector, be sure to visit our website at www.infocus.com, as specifications are subject to change. AccessoriesThe standard accessories that came with your projector are listed in the included user ’s guide. Optional accessories can be found on our website at www.infocus.com or at your retailer or dealer.Online RegistrationRegister your projector on our website at www.infocus.com/register to acti - vate your warranty and receive product updates, announcements, and reg - istration incentives. keypad elevator foot release focus (front ring) remote control receiver (IR) zoom (rear ring) panel connector power cord connector
4 Connector PanelThe projector provides both computer and video connection options, including: VESA computer S-video Composite RCA audio/videoThe projector also provides the following connectors: Monitor out, to provide an image on your desktop computer as well as on the projection screen Audio out, to provide sound for external speakers USB, to provide mouse control (used with an optional remote control only) computermonitor S-videoaudio out out USB composite videoaudio in foot adjustable security lock
5 Positioning the projectorTo determine where to position the projector, consider the size and shape of your screen, the location of your power outlets, and the distance between the projector and the rest of your equipment. Here are some general guide - lines: Position the projector on a flat surface at a right angle to the screen. The projector must be at least 4.9 feet (1.5m) from the projection screen. Position the projector within 10 feet (3m) of your power source and within 6 feet (1.8m) of your video device (unless you purchase exten - sion cables). To ensure adequate cable access, do not place the projector within 6 inches (.15m) of a wall or other object. If you are installing the projector on the ceiling, refer to the installation guide that comes with the Ceiling Mount Kit for more information. To turn the image upside down, see “Ceiling” on page 31. We recommend using an InFocus authorized ceiling mount. Position the projector the desired distance from the screen. The distance from the lens of the projector to the screen, the zoom setting, and the video format determine the size of the projected image. The image exits the projector at a given angle. This image offset is 112.2%. This means that if you have an image 10’ high, the bottom of the image will be 1.12’ above the center of the lens. Table 1: Range of distance to the screen for a given screen size Diagonal Screen Size (inches/m) Distance to screenMaximum distance (feet/m) Minimum Distance (feet/m) 60/1.5 8.5/2.5 7.9/2.4 80/2 11.3/3.4 10.6/3.2 92/2.3 13.0/3.9 12.2/3.7 150/3.8 21.2/6.4 19.8/6.0 bottom of image 1.12 ft above center10 ft high image Projection angle lens center of lens
6 Projector and device connector guideThe following illustration and table should help you find the connectors to use and obtain the best resolution possible from your input devices, such as computers, standard VCRs, DVD players (progressive and interlaced), HDTV sources (1080i and 720p HDTV formats), TV and satellite tuners, camcorders, video games (progressive and interlaced), and laser disc play - ers. computermonitor S-videoaudio out out USB composite videoaudio in
7 Video Device Video Compatibility If Your Device Connector Is Attach to Adapter or Labeled Connector on Projector For Setup Instructions, see Comments Standard Broadcast TV ( not HDTV) via: cable, digital cable, satellite TV, DVD, or VCR NTSC, PAL, and SECAM formats Composite video or S-video Video 2 or S-video 1 Composite video connection on page 13 . S-video connection on page 13 Not for progressive (i.e. HDTV) sources. See page 8. Standard Video Camera NTSC, PAL, and SECAM formats Composite video or S-video Video 2 or S-video 1 Composite video connection on page 13 . S-video connection on page 13 Not for progressive (i.e. HDTV) sources. See page 8. Standard Video Game NTSC, PAL, and SECAM formats Composite video or S-video Video 2 or S-video 1 Composite video connection on page 13 . S-video connection on page 13 Not for progressive (i.e. HDTV) sources. See page 8.
8 Video Device Video Compatibility If Your Device Connector Is Attach to Adapter or Labeled Connector on Projector For Setup Instructions, see Comments HDTV (High Definition TV) 1080i, 720pComponent 480i VGAComponent video Computer InComputer In via optional VESA to Component adapter VESA connection on page 13Component video connection on page 13 Progressive DVD 1080i, 720pComponent 480p and 480i VGA Component video Computer InComputer In via optional VESA to Component adapter VESA connection on page 13Component video connection on page 13 Progressive Video Game 1080i, 720pComponent 480p and 480i VGAComponent video Computer InComputer In via optional VESA to Component adapter VESA connection on page 13Component video connection on page 13
9 Connecting a computer sourceRequired computer connectionsConnect one end of the provided computer cable to the Computer In con - nector on the projector and the other to the VESA connector on your com - puter. If you are using a desktop computer, you will need to disconnect the monitor cable from the computer ’s video port first (you can connect this monitor cable to the Monitor Out connector on the projector, see below). Connect the black power cord to the Pow e r connector on the back of the projector and to your electrical outlet.NOTE: Always use the power cord that shipped with the projector. Optional computer connections To get sound from the projector, connect an audio cable (optional cable, not included) to your computer and to the red and/or white Audio In connec - tors on the projector. You may also need an adapter. If you are using a desktop computer and want to see the image on your computer screen as well as on the projection screen, connect the computer ’s monitor cable to the Monitor Out connector on the projector. To advance slides in a PowerPoint presentation using an optional remote control, plug the USB cable into the USB mouse connector on your com - puter and the USB connector on the projector. connect computer cableconnect audio cableconnect monitor cable connect USB cable