InFocus Projector IN212x User Manual

10
Connecting a video device
You can connect video devices such as VCRs, DVD players, camcorders, digital 
cameras, video game consoles, HDTV receivers, and TV tuners to the projector. 
You can connect the audio directly to the projector to get sound from the built-in 
speaker, or you can bypass the projector’s audio system and connect the audio 
directly from your source to a stereo or home theater system.
You can connect the projector to most video devices that can output video. You 
cannot dire
ctly...

11
Shutting down the projector
Auto Off Time
The projector also has an Auto Off Time feature that automatically turns the 
projector off after no active sources are detected and no user interaction with the 
projector is performed for 20 minutes. By default, this feature is off. You can 
change the length of time, see  page 27.
Turning off the projector
To turn the projector off, press the Power button on the remote or keypad. The 
lamp turns off and the Power LED blinks amber for 30 seconds while the...

12
Problem SolutionResult
No start up screen Plug power cord into the projector
press the Power buttonCorrect image
Only start up screen appears Press the SOURCE button
activate laptop’s external portComputer image projected
S-VIDEOUSB-B
USB-A
S-VIDEOUSB-BUSB-A
Startup
Screen
S-VIDEOUSB-B USB-A
A
Startup
Screen
S-VIDEOUSB-BUSB-ARestart laptop
S-VIDEOUSB-BUSB-A
A
A 

13
ProblemSolution Result
No computer image, just the words “Signal out of 
range”  Press the Auto Image button on remote
Adjust computer refresh rate Varies per operating 
sy
st

em.
You may also need to set a different resolution on your 
co mp

uter, as shown in the following problem, “image 
fuzzy or cropped” Computer image projected
Only my laptop’s background appears, not the 
Deskto p icons Change
 the

 Multiple Display setting to Duplicate these 
displays.  Varies per operating system....

14
Image fuzzy or cropped Change the computers Resolution setting to match 
the projectors resolution. Varies per operating system.  Image clear and not cropped
Image not centered on screen Move projector, adjust height
Correct image
Problem
Solution Result
AAA
S-VIDEOUSB-B
USB-A
Adjust horizontal or 
vertical position in 
Advanced Menu > 
Image > PC... menu
S-VIDEOUSB-BUSB-A
S-VIDEOUSB-B USB-A 

15
Image not squareAdjust Keystone on keypad Square image
Image not sharp Adjust Sharpness in the Basic Menu
Correct image
Image does not fit 4:3 or 16:9 screen Change aspect ratio to 4:3 or 16:9 in Basic Menu > 
Aspect Ratio menu Correct image
Problem
Solution Result
S-VIDEOUSB-B
USB-A 

16
Image upside downTurn off Ceiling Mount in Basic menu
Correct image
Image reversed left to right Turn off Rear Project in Advanced Menu > Setup > 
Image Setup... menu
Correct image 
Projected colors don’t match source Adjust the items in the Advanced Menu > Image > 
Color... menu Correct image
Problem
Solution Result
A
A
COLORCOLOR 

17
The video embedded in my PowerPoint presentation 
does not play on the screenTurn off the internal LCD display on your laptop
Embedded video plays correctly
Lamp won’t turn on, the projector is overheating Make sure vents aren’t blocked, turn off the projector 
and allow it to cool for one minute  Lamp turns on
Problem
Solution Result
S-VIDEOUSB-B
USB-AAB
AB
S-VIDEOUSB-B USB-A
AB
S-VIDEOUSB-B
USB-A
Overheating 
indicator
Startup
Screen
S-VIDEOUSB-BUSB-A 

18
Still need assistance?
If you need assistance, visit our website at www.
 infocus.com/support or call us. See 
the Quick Start Guide for support contact information.
This product is backed by a limited warranty. An extended warranty plan may be 
pur chas
ed fr

om your dealer. When sending the projector in for repair, we 
recommend shipping the unit in its original packing material, or having a 
professional packaging company pack the unit. Please insure your shipment for its 
full value. “Replace...

19
Using the remote control
The remote uses two (2) AAA batteries (not provided). They are easily installed by removing 
the cover from the remote’s back, aligning the + and - ends of the batteries, sliding them into 
place, and then replacing the cover.
Caution: 
• When replacing the remote batteries, be  awar

e that using batteries other than AAA 
batteries may risk severe damage to the re mote. When disposing of the batteries, be 
sure to do so in an envi romentally proper manner.
• If the remote...