Home > InFocus > Projector > InFocus Projector IN2126x User Manual

InFocus Projector IN2126x User Manual

    Download as PDF Print this page Share this page

    Have a look at the manual InFocus Projector IN2126x User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 493 InFocus manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							10
    Connecting a video device
    You can connect video devices such as VCRs, DVD players, camcorders, digital 
    cameras, video game consoles, HDTV receivers, and TV tuners to the projector. 
    You can connect the audio directly to the projector to get sound from the built-in 
    speaker, or you can bypass the projector’s audio system and connect the audio 
    directly from your source to a stereo or home theater system.
    You can connect the projector to most video devices that can output video. You 
    cannot dire
    ctly connect the coaxial cable that enters your house from a cable or 
    satellite company, the signal must pass through a tuner first. Examples of tuners are 
    digital cable boxes, VCRs, digital video recorders, and satellite TV boxes. Basically, 
    any device that can change channels is considered a tuner.
    Before connecting your projector, you should decide which aspect ratio you want 
    to use.
      The projector’s Aspect Ratio setting is accessed through the Resize button 
    on the remote or through the projector’s Basic Menu. See page  24 for more 
    information.
    LightCast Reader
    Plug a USB thumb drive into one of the USB A connectors. See  LightCast Reader 
    on page  28.
    HDMI connection
    HDMI is a standard, uncompressed, all-digital audio/video interface. HDMI 
    provides an interface between sources, such as set-top boxes, DVD players, and 
    receivers and your projector. Plug an HDMI cable into the video-out connector on 
    the video device and into the HDMI connector on the projector.
    Composite video connection
    Plug the composite video cable’s yellow connector into the video-out connector 
    on the video device. Plug the other yellow connector into the yellow Video 
    connector on the projector.
    VGA connection
    If your video device has a 15-pin VGA output, plug one end of the included 
    computer cable into the VGA connector on your video source. This connector 
    may be labeled “To Monitor” on the video source. Plug the computer cable into 
    either the Computer 1 or Computer 2 connector on the projector.
    Component video connection
    If your HD video device has component connectors, an optional Component to 
    VGA adapter can be used. Plug the component cable into the video device. Plug 
    the other end of the component cable into the adapter and plug the adapter into 
    the Computer 1 or Computer 2 connector.
    S-video connection
    Plug the S-video cable’s connector into  the video-out connector on the video 
    device. Plug the other connector into the S-video connector on the projector.
    Audio
    For audio, connect a 3.5mm stereo cable to the Audio 1/Audio 2 connector on the 
    projector and to your source. If your source uses RCA audio connectors, a Y-cable 
    or adapter may be used. (Note: A separate audio connection is not required for 
    HDMI source inputs.) 
    						
    							11
    Shutting down the projector
    Auto Off Time
    The projector also has an Auto Off Time feature that automatically turns the 
    projector off after no active sources are detected and no user interaction with the 
    projector is performed for 20 minutes. By default, this feature is off. You can 
    change the length of time, see  page 27.
    Turning off the projector
    To turn the projector off, press the Power button on the remote or keypad. The 
    lamp turns off and the Power LED blinks amber for 30 seconds while the fans 
    continue to run to cool the lamp. If the Power Saving Mode feature is on and when 
    the lamp has cooled, the LED lights amber and the fans stop. If the Power Saving 
    Mode feature is off and when the lamp has cooled, the LED blinks green and the 
    fans stop. Unplug the power cable to completely power off the projector.
    Troubleshooting your setup
    If your image appears correctly on the screen, skip to the next section. If it does 
    not, troubleshoot the setup.
    The Status Indicator Lights on top of the projector indicate the operational state of 
    the pr
    ojecto
    
    r and can help you with troubleshooting.
    Table 4: Status Indicator Lights
    Operational ModeStatus Indicator Lights
    Normal operation POWER: Solid green
    TEMP: Off
    LAMP: Off
    Powering up POWER: Blinks green
    TEMP: Off
    LAMP: Off
    Powering down POWER: Blinks amber
    TEMP: Off
    LAMP: Off
    Standby with Power Saving Mode off POWER: Blinks green
    TEMP: Off
    LAMP: Off
    Standby with Power Saving Mode on POWER: Solid amber
    TEMP: Off
    LAMP: Off
    Fan failure POWER: Blinks amber
    TEMP: Blinks red
    LAMP: Blinks red
    Lamp failed to ignite POWER: Solid amber
    TEMP: Blinks red
    LAMP: Blinks red
    Lamp is at the end of its life POWER: Solid amber
    TEMP: Blinks red
    LAMP: Blinks red
    Projector is overheating POWER: Solid amber
    TEMP: Blinks red
    LAMP: Off 
    						
    							12
    Problem SolutionResult
    No start up screen Plug power cord into the projector
    press the Power buttonCorrect image
    Only start up screen appears Press the SOURCE button
    activate laptop’s external portComputer image projected
    S-VIDEOUSB-B
    USB-A
    S-VIDEOUSB-BUSB-A
    Startup
    Screen
    S-VIDEOUSB-B USB-A
    A
    Startup
    Screen
    S-VIDEOUSB-BUSB-ARestart laptop
    S-VIDEOUSB-BUSB-A
    A
    A 
    						
    							13
    ProblemSolution Result
    No computer image, just the words “Signal out of 
    range”  Press the Auto Image button on remote
    Adjust computer refresh rate Varies per operating 
    sy
    st
    
    em.
    You may also need to set a different resolution on your 
    co mp
    
    uter, as shown in the following problem, “image 
    fuzzy or cropped” Computer image projected
    Only my laptop’s background appears, not the 
    Deskto p icons Change
     the
    
     Multiple Display setting to Duplicate these 
    displays.  Varies per operating system.  Background and Desktop projected
    S-VIDEOUSB-B
    USB-AA
    Signal out of
     the range
    S-VIDEOUSB-BUSB-A
    A
    A
    S-VIDEOUSB-BUSB-A
    A
    AS-VIDEOUSB-BUSB-AA
    A 
    						
    							14
    Image fuzzy or cropped Change the computers Resolution setting to match 
    the projectors resolution. Varies per operating system.  Image clear and not cropped
    Image not centered on screen Move projector, adjust height
    Correct image
    Problem
    Solution Result
    AAA
    S-VIDEOUSB-B
    USB-A
    Adjust horizontal or 
    vertical position in 
    Advanced Menu > 
    Image > PC... menu
    S-VIDEOUSB-BUSB-A
    S-VIDEOUSB-B USB-A 
    						
    							15
    Image not squareAdjust Keystone on keypad Square image
    Image not sharp Adjust Sharpness in the Basic Menu
    Correct image
    Image does not fit 4:3 or 16:9 screen Change aspect ratio to 4:3 or 16:9 in Basic Menu > 
    Aspect Ratio menu Correct image
    Problem
    Solution Result
    S-VIDEOUSB-B
    USB-A 
    						
    							16
    Image upside downTurn off Ceiling Mount in Basic menu
    Correct image
    Image reversed left to right Turn off Rear Project in Advanced Menu > Setup > 
    Image Setup... menu
    Correct image 
    Projected colors don’t match source Adjust the items in the Advanced Menu > Image > 
    Color... menu Correct image
    Problem
    Solution Result
    A
    A
    COLORCOLOR 
    						
    							17
    The video embedded in my PowerPoint presentation 
    does not play on the screenTurn off the internal LCD display on your laptop
    Embedded video plays correctly
    Lamp won’t turn on, the projector is overheating Make sure vents aren’t blocked, turn off the projector 
    and allow it to cool for one minute  Lamp turns on
    Problem
    Solution Result
    S-VIDEOUSB-B
    USB-AAB
    AB
    S-VIDEOUSB-B USB-A
    AB
    S-VIDEOUSB-B
    USB-A
    Overheating 
    indicator
    Startup
    Screen
    S-VIDEOUSB-BUSB-A 
    						
    							18
    Still need assistance?
    If you need assistance, visit our website at www.
     infocus.com/support or call us. See 
    the Quick Start Guide for support contact information.
    This product is backed by a limited warranty. An extended warranty plan may be 
    pur chas
    ed fr
    
    om your dealer. When sending the projector in for repair, we 
    recommend shipping the unit in its original packing material, or having a 
    professional packaging company pack the unit. Please insure your shipment for its 
    full value. “Replace lamp” message appears at startup, lamp 
    w
    on’
    
    t turn on Lamp must be replaced (see 
    page 34) Lamp turns on
    Problem
    Solution Result
    S-VIDEOUSB-B
    USB-A
    lamp door
    replace lamp
    Startup
    Screen
    S-VIDEOUSB-B USB-A 
    						
    							19
    Using the remote control
    The remote uses two (2) AAA batteries (not provided). They are easily installed by removing 
    the cover from the remote’s back, aligning the + and - ends of the batteries, sliding them into 
    place, and then replacing the cover.
    Caution: 
    • When replacing the remote batteries, be  awar
    
    e that using batteries other than AAA 
    batteries may risk severe damage to the re mote. When disposing of the batteries, be 
    sure to do so in an envi romentally proper manner.
    • If the remote control gets wet, wipe it dry immediately.
    • Avoid excessive heat and humidity.
    • Ensure the batteries polarity (+/-) is aligned correctly.
    • Do not mix new and old batteries together, or mix different types of batteries together.
    • Replace the batteries as soon as they run out.
    • Remove batteries from the remote control when storing or not in use for a prolonged  per
    i
    
    od.
    To operate, point the remote at the front of  the pr
     ojector (not at the computer). The range 
    of optimum operation is about 15 feet (4.5m).
    Press the remote’s Power button to turn the projector on and off (see page  8 for shutdown 
    info).
    Press the remote’s Menu button to open the projector’s menu system. Use the arrow 
    bu tton
    
    s to navigate, and the Select button to se lect features and adjust values in the menus. 
    See  page  23 for more info on the menus.
    The remote also has:
    • Volume buttons adjust the sound.
    • Custom button that can be assigned to a sp ecial functio
    n
     , like Blank Screen or Freeze 
    (see  page 26).
    • Source button brings up a menu of all possible sources allowing the user to switch the  active sour ce
    
    .
    • Blank button to blank the screen.
    • Presets button to select stored settings (see  page 24).
    • Mute button to silence the audio.
    • Auto Image button to resynch the projector to the source.
    • Resize button to switch  among aspect ratios (s
    ee
      page  24).
    • Help button to get help with connecting sources and improving the picture.
    • ESC to go back to previous OSD menu or  to return
      to home screen when using 
    LightCast source.
    • PC button to cycle through the computer sources.
    • Video button to cycle through the video sources.
    • Keystone buttons adjust the squareness of the image • Magnify buttons magnify and reduce the projected picture size.
    • Freeze button to pause the projected image.
    • Overscan button remove noise around the video image.
    • AV Mute button blanks the projected image and mutes audio.
    Lightcast and the remote
    When using Lightcast, the ESC bu
    tton
     ac
     ts as the Home key and navigation keys are used for 
    navigating LightCast.
    Troubleshooting the remote
    • Make sure the batteries are installed in the proper orientation and are not dead.
    • Make sure you’re pointing the remote at the projector or the screen, not the computer,  and 
    ar
    
    e within the remote range of 15 feet (4.5m). For best results, point the remote at 
    the projector.
    navigation 
    buttons 
    						
    All InFocus manuals Comments (0)

    Related Manuals for InFocus Projector IN2126x User Manual