InFocus Projector IN136UST User Manual

IN134UST/IN136UST User’s Manual 
Video Menu  
Press the MENU button to open the  OSD menu. Press the  ◄► buttons to move to the  Video menu. 
Press the ▲▼  buttons to move up and down in the  Video menu. Press ◄► to change setting values. 
Note: 
Available settings vary depending on the  input source. Others will appear grayed out. 
 
ITEM DESCRIPTION 
Video AGC Press the 
◄► buttons to enable or disable the Automatic Gain Control for video 
source. 
Video Saturation  Press the ◄► buttons to adjust the...

IN134UST/IN136UST User’s Manual 
Audio 
Press  (Enter) / ► to enter the  Audio sub menu. 
 
ITEM DESCRIPTION 
Volume Press  the ◄►  buttons to adjust the audio volume.  
Mute Press  the ◄►  buttons to turn on or off the speaker. 
Audio Input  Press the ◄► buttons to select audio input. 
 
– 25  –  

IN134UST/IN136UST User’s Manual 
Installation I Menu  
Press the MENU button to open the  OSD menu. Press the  ◄► buttons to move to the  Installation I 
menu. Press the  ▲▼ buttons to move up and down in the  Installation I menu. Press ◄► to change 
setting values. 
 
ITEM DESCRIPTION 
Language Press  the ◄►  buttons to change the OSD language. 
Blank Screen  Press the ◄► buttons to select a different blank screen color. 
Projection  Press the 
◄► buttons to choose between different projection methods...

IN134UST/IN136UST User’s Manual 
Advanced Features 
Press the Menu button to open the OSD menu. Press  ◄► to move to the  Installation I menu. Press 
▲▼  to move to the  Advanced menu and then press  Enter or ►. Press  ▲▼ to move up and down in 
the  Advanced  menu. Press  ◄► to change setting values. 
 
ITEM DESCRIPTION 
Security Lock  Press the ◄► buttons to enable or disable the security lock function. 
Wall Color  Press the 
◄► buttons to enable or disable the wall color function. 
(Off/ Light...

IN134UST/IN136UST User’s Manual 
Presentation Timer 
The Presentation Timer function can indicate the presentation ti me on the screen to help you achieve 
better time management while giving a presentation. 
 
ITEM DESCRIPTION 
Timer Press  the ◄►  buttons to enable or disabl e the presentation timer. 
Timer Period Press the ◄► buttons to select the timer period (1 ~ 60 minutes) 
Timer Reset  Press  (Enter) / ► to reset the timer settings. 
— 28 —  

IN134UST/IN136UST User’s Manual 
Installation II Menu  
Press the MENU button to open the  OSD menu. Press the  ◄► buttons to move to the  Installation II 
menu. Press the  ▲▼ buttons to move up and down in the Installation II menu.  
 
ITEM DESCRIPTION 
Auto Source  Press the ◄► buttons to enable or disable automatic source detection. 
Auto Power Off 
(min.)  Press the 
◄► buttons to enable or disable automatic shutdown of lamp when there is 
no signal.  
Auto Power On  Press the 
◄► buttons to enable...

IN134UST/IN136UST User’s Manual 
Advanced Features 
Press the Menu button to open the OSD menu. Press  ◄► to move to the  Installation II menu. 
Press  ▲▼ to move to the  Advanced menu and then press  Enter or ►. Press  ▲▼ to move up and 
down in the  Advanced menu. Press  ◄► to change setting values. 
 
ITEM DESCRIPTION 
OSD Menu Setting  Press  (Enter) / 
► to enter the OSD setting menu. See page  31 for more 
information on OSD Menu Setting . 
Peripheral Test Press  (Enter) / 
► to enter the...

IN134UST/IN136UST User’s Manual 
OSD Menu Setting  
 
ITEM DESCRIPTION 
Menu Position Press the ◄► buttons to select a different OSD location. 
Translucent Menu  Press the ◄► buttons to select the OSD background translucent level.  
Menu Display  Press the ◄► buttons to select the OSD timeout delay. 
Peripheral Test 
 
ITEM DESCRIPTION 
Remote Control 
Test  Press  (Enter) / 
► to test the IR remote controller for diagnostic purposes. 
Color Test  Press  (Enter) / 
► to select different color test...

IN134UST/IN136UST User’s Manual 
Lamp Hour Reset 
 
Please refer to Resetting the Lamp  on page 41 to reset the lamp hour counter. 
— 32 —  

IN134UST/IN136UST User’s Manual 
3D 
 
ITEM DESCRIPTION 
3D Press the ◄►  buttons to select Off, DLP-Link or IR. 
3D Sync Invert  Press the ◄► buttons to turn 3D Sync Invert On or Off. 
3D Format  Press the ◄► buttons to enable or disable 3D Format. 
Note: 
1.  By default, if no 3D source is detected,  the 3D OSD menu items will not be available. 
2. When the projector is connected to an appropriate  3D source, the 3D OSD menu items are available 
for selection. 
3.  Use 3D glasses to view a 3D image....