InFocus Projector IN124a User Manual

							40
Audio mode
The Audio playlist is displayed on the screen.
When audio is playing
• To return to audio playlist: press the Menu key.KeyAction
UpGo to the previous audio file
DownGo to the next audio file
LeftDisplay the sort type
Select/EnterPlay the audio file
MenuExit audio playlist and return to EZ Suite main menu
USBPhoto
VideoAudioOffice viewer
EZ Suite
Internal Memory
Press     to Exit
sort by name
sort by time
track1
Toolbar icon Action
Go to the previous audio file
Fast rewind
Pause
Play
Fast forward
Go to the next audio file
mp3 
						

							41
Office viewer mode
The file list is displayed on the screen.
When an Office file is displaying
• To go to the next page: press the down arrow key.
• To go to the previous page: press the up arrow key.
• To scroll up: press the left arrow key.
• To scroll down: press the right arrow key.
• Or press the Menu key to open/close the Office Viewer toolbar. Use the 
right or left arrow key to highlight the desired function. Then press the 
Select/Enter key.
• To return to the filelist: close the toolbar first, and press Select/Enter key.
Note: The file name displays in the upper left corner of the Office Viewer toolbar. The 
current page number and number of pages appears on the upper right corner. The 
amount of magnification displays on the lower right corner.
KeyAction
UpGo to the previous file
DownGo to the next file
LeftDisplay the sort type
Select/EnterOpen a file
MenuExit file list and return to EZ Suite main screen
USBPhoto
Video
AudioOffice viewer
EZ Suite
Internal Memory
Press     to Exit
Office viewer
sort by name
sort by time
Close
Toolbar Fit to Screen/Fit to
Width/Fit to Height
Zoom
Out Scroll
DownZoom
In Scroll
Up Scroll
Right Scroll
Left 
						

							42
Settings
•Press the Select/Enter to enter the selected item. Press the Menu key to 
exit.
* WiFi only works when the InFocus wireless dongle (p/n SP-WIFIUSB-2) is connected.
System Description
Version Displays current EZ Media firmware version
Language Sets EZ Media on-screen display language
Update Update EZ Suite software by USB Key
UsbSwitch Connects PC to access to internal memory
PhotoDescription
Display RatioSets the display (aspect) ratio
SlideshowEnables slide show mode
Slideshow DurationSets the time interval each image displays
VideoDescription
Display RatioSets the display (aspect) ratio.
Repeat ModeSets repeat mode
AudioDescription
Repeat ModeSets repeat mode
System
Video Photo
Audio
EZ Media
Settings
WiFi
EZ Suite
WiFiDescription
AP ModeSets AP mode on/off. AP mode is set to ON by default. See page 29 for more details.
Client ModeSets Client mode on/off. See page 29 for more details.
EZ RemoteSets EZ remote on/off. See page 33 for more details. 
						

							43
Supported file formats
•Images
•Audio
•Voice Record
•Video
Image FormatProfileColor SpaceSize Limitation
JPEG
BaselineYUV400No limit
YUV420No limit
YUV422No limit
YUV440No limit
YUV444No limit
ProgressiveYUV400Width 
						

							44
•Subtitle
Note: Mixed subtitle codes are NOT supported.
•Office Viewer
FormatFontSubtitle Size
Standard SRTUTF-8 / UTF-164bits up to 448x200
2bits up to 896x200
File FormatSupport 
VersionPages/Lines LimitationSize LimitationComment
Adobe PDF
PDF 1.0
Up to 1000 pages (One 
File)Up to 75MB-
PDF 1.1
PDF 1.2
PDF 1.3
PDF 1.4
MS Word
British Word 
95.Because Office Viewer 
does not load all pages 
of a Word file 
simultaneously, there 
are no obvious page or 
line limitations.
Up to 100MBSimplified Chinese 
bold text is not 
supported.Word 97, 
2000,2002, 
2003.
Word 
2007(.docx),
2010(.docx)
MS Excel
British Excel 
5, 95.Maximum number of 
rows: 595
Up to 15MB
Password-
protected 
documents are not 
supported.Excel 97, 
2000, 2002, 
2003.Maximum number of 
columns: 256
Excel 
2007(.xlsx),2
010(.xlsx).Maximum number of 
sheets: 100
Office XP 
Excel.All of the three above 
limitations apply. 
						

							45
Maintenance
Cleaning the lens
1Apply a non-abrasive camera lens cleaner to a soft, dry cloth.
•Projector must be off and the lens must be at room temperature.
•Avoid using an excessive amount of cleaner, and don’t apply the cleaner directly to 
the lens. Abrasive cleaners, solvents or other harsh chemicals might scratch the lens.
2Lightly wipe the cleaning cloth over the lens in a circular motion.
WARNINGS:
•Turn the projector off and unplug power cord before cleaning any part of the 
projector.
•Do not touch or block the projector lens with any objects as this can damage the 
projector lens. Scratches, gouges and other lens damage are not covered by the 
product warranty.
•Do not open any cover on the projector, except the lamp cover.
•Do not attempt to service this product yourself as opening and removing covers may 
expose you to dangerous voltage and other hazards. Refer all servicing to qualified 
service personnel.
Using the security lock
The projector has a security lock for use with a Cable Lock System. Refer to the 
information that came with the lock for instructions on how to use it.security 
lock 
						

							46
Replacing the projection lamp
The Lamp Hours timer in the Projector Info menu counts the number of hours the 
lamp has been in use.
•NOTE: Be sure to use the InFocus lamp module designed for this projector. 
You can order new lamps from www.infocus.com (in select areas), your 
retailer or your dealer. Only genuine InFocus lamps are tested for use in this 
projector. Use of non InFocus lamps may cause electrical shock and fire, and 
may void the projector warranty.  InFocus is not liable for the performance, 
safety or certification of any other lamps.
WARNINGS:
• The projector uses a high-pressure mercury glass lamp.  The lamp may fail 
prematurely, or it may rupture with a popping sound if jolted, scratched, or 
handled while hot.  The risk of lamp failure or rupture also increases as the 
lamp age increases; please replace the lamp when you see the “Replace Lamp” 
message.
• To avoid burns, allow the projector to cool for at least 60 minutes before you 
replace the lamp.
• Do not touch or block the projector lens with any objects as this can damage 
the projector lens. Scratches, gouges and other lens damage are not covered 
by the product warranty. 
• Unplug the power cord before replacing the lamp.
• Do not drop the lamp module. The glass may shatter and cause injury.
• Do not touch the glass surface of the lamp module. Fingerprints can obscure 
projection sharpness and may cause the glass to shatter.
• Be extremely careful when removing the lamp housing. In the unlikely event 
that the lamp ruptures, small glass fragments may be generated. The lamp 
module is designed to contain most of these fragments, but use caution when 
removing it. 
• Before replacing a ruptured lamp, clean the lamp compartment and dispose of 
cleaning materials. Wash hands after lamp replacement. 
• When replacing the lamp while the projector is ceiling-mounted, wear 
protective eyewear to prevent eye injury.
Hg – Lamp contains mercury. Manage in accordance with local disposal 
laws. See www.lamprecycle.org. 
						

							47
1Turn off the projector and unplug the power cord.
2Wait 60 minutes to allow the projector to cool thoroughly. 
3Remove the lamp door, located on top of the projector, by removing the 
screw on the side of the lamp door, sliding the door forward, and lifting the 
lamp door off.
4Loosen the captive screws that attach the lamp housing to the projector.  
NOTE: If the projector is installed on a ceiling mount, be careful not to drop 
the lamp module once the captive screws are loosened.
5Carefully lift the lamp straight up, off of the alignment pins; being careful not to 
pinch the lamp connector. Dispose of the lamp in an environmentally proper 
manner.
6Install the new lamp module, aligning the pins properly. Be careful not to pinch 
the lamp connector.
7Tighten the screws. (NOTE: If the pins have not been aligned properly, the 
screws will not tighten securely.)
8Replace the lamp door by (a) aligning the hinges, (b) putting the lamp door 
down and (c) locking it back into place.
9Replace the lamp door screw and tighten securely.
10Plug in the power cord and press the Power button to turn the projector back 
on.
11To reset the lamp hour timer, navigate to the Advanced Menu > Status/Service 
menu and select Reset Lamp Hours....
turn off and unplug 
projectorwait 60 minutes
loosen screws
Image
Setup
Status/Service
Basic MenuSource Info...
Projector Info...
Reset Lamp Hours...
Factory Reset...
Service Code...
( Advanced Menu )MDL: IN124a
FW: 1.12 
						

							48 Numerics
3D Sync Invert 26
A
AC Power On 28
AP Mode 29, 42
Aspect Ratio 25
Audio 1/Audio 2 7
Auto Image 25
Auto Keystone 25
Auto Off Time 29
Auto Source 28
AV Mute 27
B
Blank Key 27
Blank Screen 27
Brightness 25
C
Cable box 10
Ceiling Mount 25, 27
Client Mode 29, 42
Closed Captions 27
Color Space 26
Computer 1 27
Computer 1/Computer 2 7
Computer 2 27
Connecting
Video device 10
Connecting a video device 10
Contacting InFocus 18
Contrast 25
Crestron RoomView 31
Customer service contact information 18
D
Detect Film 26
Digital Zoom 27
E
Eco Blanking 28
EZ Display 30
EZ Remote 42
F
Factory Reset 29
Focus 9
Force wide 26
Freeze Screen 27
G
Gamma 26
H
HDMI 27
HDTV 25
High Altitude Setting 29
Horizontal Position 26
Horz Shift 27
I
Instant Power On 28
Internal Speaker 27
IP Address 29
K
Keypad 27
Keypad buttons 21
Keystone 25
L
Lamp Low Power 28
M
Magnify Level 27
Menu Transparency 28
menu usage 24
Mute 27
N
Network 29 
						

							49 O
only 26
Overscan 26, 27
P
Phase 26
PIN Protect 28
Power connector 7
Power cord 7
Power Saving Mode 28
Prevent PC Screen Saver 26
Programmed Dimming 28
Projector
Connecting video devices 10
Keypad buttons 21
Menus 24
Positioning 6
Setting up 6
Troubleshooting problems 11
Projector Info 27, 29
R
Rear Project 27
Red/Green/Blue Gain 26
Red/Green/Blue Offset 26
remote control 19
Resetting the projector 29
Restart Network... 29
S
Screen Aspect 10
Search Screen 28
Service 29
Set Black Level... 26
Sharpness 25
Show Messages 28
Source 27
Source Info 27, 29
SSID 29Subnet Mask 29
Sync Threshold 26
T
Tint 26
Tracking 26
Troubleshooting 11
TV tuner 10
U
USB 5
USB MINI-B 7
V
Vert Shift 27
Vertical Position 26
Volume 25
Volume button 20
W
Warranty 18
WiFi 29, 42
Wireless connection 29
Wireless LAN 29
WLAN 29
Z
zoom 9