InFocus Projector IN116x User Manual

							1
Declaration of Conformity
Manufacturer: InFocus Corporation, 13190 SW 68th Parkway, Suite 200, Portland, Oregon 
97223-8368 USA
We declare under our sole resp
onsibility that this projector conforms to the following 
directives and norms:
ErP Directive 2009/125/EC
EMC Directive 2004/108/EC
EMC: EN 55022, EN 55024, EN 61000-3-2, EN 61000-3-3
Low Voltage Directive 2006/95/EC
Safety: IEC 60950-1:2005 (2nd Edition) + A1: 2009 and EN 60950-1:2006 + A11:2009 
+ A1:2010 + A12:2011
Trademarks
Apple, Macintosh, and PowerBook are tradem arks or registered trademarks of Apple 
Computer, Inc. IBM is a trademark or registered trademark of International Business 
Machines, Inc. Microsoft, PowerPoint, and Windo ws are trademarks or registered trademarks 
of Microsoft Corporation. Adobe and Acrobat ar e trademarks or registered trademarks of 
Adobe Systems Inco rporated. DLP®, DLP Link and the DL P logo are registered trademarks 
of Texas Instruments and BrilliantColor™ is a trademark of Texa s Instruments. InFocus, In 
Focus, and INFOCUS (stylized) are either regist ered trademarks or trademarks of InFocus 
Corporation in the United States and other countries.
NOTE: This product is covered electrical  and electronic equipment under the 
European Union's Waste from Electrical  and Electronic Equipment ("WEEE") 
Directive (2002/96/EC). The WEEE Directive requires that covered 
equipment be collected and managed sepa rately from typical household waste 
in all EU member states. Please  follow the guidance of your local 
environmental authority or ask the shop where you purchased the product for 
collection or recycling options.
FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to the following two 
conditions: (1) This de vice may not cause harmful interfere nce, and (2) this device must 
accept any interference received, including interference that may cause undesired operation.
Note: This equipment has  been tested and found to comply w ith the limits for a Class B digital 
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable 
protection against harmful interference in a residential installatio n. This equipment generates, 
uses and can radiate radio frequency energy and,  if not installed and used in accordance with 
the instructions, may cau se harmful interference to radio co mmunications. However, there is 
no guarantee that interference w ill not occur in a particular installation. If this equipment does 
cause harmful interference to radio or televi sion reception, which can be determined by 
turning the equipment off and on,  the user is encouraged to try to correct the interference by 
one or more of the following measures:
--Reorient or relocate the receiving antenna.
--Increase the separation between the equipment and receiver.
--Connect the equipment into an ou tlet on a circuit different from that to which the receiver is 
connected.
--Consult the dealer or an experien ced radio/TV technician for help.
Changes or modifications not expressly approved by InFocus Corporation may void authority 
to operate the equipment.
Canada
This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de 
la classe B est conforme à  la norme NMB-003 du Canada.
Agency Approvals
cMETus
Other specific Country Approvals may appl y. Please see product certification label.
This document applies to re gulatory models IN112x, IN114x, IN116x, IN118HDx, 
IN118HDxc, IN119HDx, IN119HDxc.
Input ratings: 100-240Vac, 2.6A, 50-60Hz
InFocus reserves the right to  alter product offerings and speci fications at any time without 
notice. 
						

							2
Table of Contents
Introduction 
4
Positioning the projector  6
Connecting a computer source  8
VGA connection  8
Connecting power  8
Optional computer connections  8
Displaying an image  9
Adjusting the image  10
Connecting a video device  11
Video device connections  11
HDMI connection  11
Composite video connection  11
VGA connection  11
Component video connection  11
S-video connection  11
Audio  11
Shutting down the projector  12
Troubleshooting your setup  12
Using the remote control  20
Using the audio  21
Using the keypad buttons  22
Optimizing computer images  23
Presentation features  23
Optimizing video images  24
Customizing the projector  24
Using the menus
 25
Basic Menu  26
Advanced Menu  27
Maintenance  31
Cleaning the lens  31
Using the security lock  31
Replacing the projection lamp  32 
						

							3
Important Operating Co
nsiderations for Safety
• Refer to this guide for proper  startup and shutdown procedures.
• Follow all warnings and cautions  in this manual and on the 
 projector.
• Place the projector in a horizontal pos ition no 
 greater than 15 degrees off axis.
• Locate the projector at least 4' (1.2m)  away from 
 any heating or cooling vents.
• Do not block ventilation ope nin
 gs. Locate the projector in a well-ventilated 
area without obstructions to intake or e xhaust vents. Do not place the projector 
on a tablecloth or other soft c overing that may block the vents.
• Do not place the projector in direct sunl ight, 
 humid, greasy or dusty places or 
in places where the projector may come  into contact with smoke or steam.
• Do not touch or block the projector lens  with any objects 
 as this can damage 
the projector lens. Scratches, gouges a nd other lens damage are not covered by 
the product warranty.
• Do not look directly into the lens  while 
 the projector is being used.
• Do not drop the projector.
• Do not spill liquid on the projector. Sp illed
  liquid may damage the projector.
• Use the power cord provided. Connect the 
 power cord to a receptacle with a 
protective safety (earth) ground terminal. A surge-protected power strip is 
recommended.
• Do not overload wall outlets.
• When disconnecting the power cord , 
 hold the plug, not the cord.
• Wash hands after handling the cabl es supplied with this produ
 ct.
• The projector remote control uses batte ries. Make sure the batteries’ polarity 
(+/-) is aligned 
 correctly. Dispose of used batteries in accordance with local 
disposal laws.
• Use an InFocus approved ceiling mount  kit for proper 
 fitting, ventilation and 
installation.  The warrant y does not cover any damage caused by use of non-
approved ceiling mount kits or by in stalling in an improper location. 
• When the projector is ceiling mounted,  we
 ar protective eyewear to prevent eye 
injury before opening lamp door.
• Refer all service to qualified servic e personnel. 
 Servicing your own projector 
can be dangerous to you a nd will void the warranty. • Only use replacement parts specified by 
InFocus. 
  Unauthorized substitutions 
may result in fire, electrical shock, or injury, and may void the warranty
• Only genuine InFocus lamps are tested for use in this projector. Use of non  InFocus
  lamps may cause electrical shoc k and fire, and may void the projector 
warranty. 
• Hg – Lamp contains mercury.  Manage in accordance with local 
disposal laws. See  www.lamprecycle.org .
• The projector uses a high- pressure mercury glass lamp.  The lamp may fail 
prematurely, or it may rupture with  a popping sound if jolted, scratched, or 
handled while hot.  The risk of lamp failure or rupture also increases as the 
lamp age increases; please  replace the lamp when you see the “Replace Lamp” 
message.
• In the unlikely event of a lamp rupture, particles 
 may exit through the projector 
vents. Please keep people, food, and dr inks at least 3’ (1m) away from all 
projector vents. For ceili ng applications, keep people, food and drinks out of 
the "keep out" area under and around th e projector, as indicated by the 
illustration.
Follow these instructions to help ensure image quality and lamp life over the life of 
t
 he projector. Failure to follow these instructions may affect the warranty. For 
complete details of the warranty, see the Warranty Booklet.
5 ’
/1.5m8 ’/2.4m
3’ / 1 m3’ / 1 m
3’ / 1 m
3’ / 1 m 
						

							4
Introduction
Your new digital projector is simple to connect, easy to use, and straightforward to 
maintain. It is a versatile  projector that is flexible enough for business presentations 
and home video viewing too. The IN1 12x has native SVGA 800 x 600 resolution, 
the IN114x has native XGA 1024 x 768 reso lution, the IN116x has native WXGA 
1280 x 800 resolution, and the IN118HDx/IN118HDxc/IN119HDx/IN119HDxc 
have native 1080p 1920 x 1080 resolution. They  are compatible with a wide variety 
of computers and video devices.
Product specifications
To read the latest specifications on your mu ltimedia projector, be sure to visit our 
website at  www.infocus.com , as specifications are subject to change.
Accessories
The standard accessories that came with your projector are listed in the included 
Quick Start Guide. Opti onal accessories can be found on our website at 
www.infocus.com/support  or at your retailer or dealer.
Online registration
Register your projector on our website at  www.infocus.com/register to activate 
your warranty and receive product update s, announcements, and registration 
incentives. IN112x/IN114x/IN116x
IN118HDx/IN118HDxc/IN119HDx/IN119HDxc
connector 
panel
power cord 
connector
focus 
lens
remote control 
receiver (IR) zoom 
keypad 
security bar
lamp cover
lens
remote control 
receiver (IR) zoom 
keypad 
security bar
lamp cover 
						

							5
Connector panel
The projector provides both comput
er and video connection options.
IN112x/IN114x/IN116x/IN118HDx/IN119HDx:
• VGA computer (2)
• Composite video 
• HDMI
•S-video
• USB connector for firmware upgrades,  mouse control and Screen Save 
 mode.
• Monitor out, for VGA pass through to an external monitor.
• Audio inputs for video and computer.
• Audio output to external speakers.
• RS-232 serial control. Co mman
 d control codes are on our support website at 
www.infocus.com/support . 
IN118HDxc/IN119HDxc:
• VGA computer (1)
• HDMI
• USB connector for firmware upgrades,  mouse control and Screen Save 
 mode.
• Audio inputs for video and computer.
• Audio output to external speakers.
• RS-232 serial control. Co mman
 d control codes are on our support website at 
www.infocus.com/support .  IN112x/IN114x/IN116x/IN118HDx/IN119HDx
IN118HDxc/IN119HDxc
RS232
computer
composite video
audio in/out
security lock
S-video
monitor 
out
HDMIUSB
RS232
computer
audio in/out
security lockHDMIUSB 
						

							6
Positioning the projector
To determine where to position the projector, consider the size and shape of your 
screen, the location of your power outlets,  and the distance between the projector 
and the rest of your equipment.  Here are some general guidelines:
• Position the projector on a fl at surface at a right angle to the screen. The projector 
must be at least 39.4” (1.0 m) from the projection screen.
• If you are installing the projector on the ceiling, we strongly recommend using  InFocus approved ceiling mounts for proper  fitting, ventilation and installation. 
Refer to the installation guide that comes with the InFocus Ceiling Mount Kit (p/n 
PRJ-MNT-UNIV) for more information. The warranty does not cover any damage 
caused by use of non-approved ceiling mount  kits or by installing in an improper 
location. To turn the image upside down, see “Ceiling mount” on page 28. We 
recommend using an InFocus  authorized ceiling mount.
• Position the projector the desired dist ance from the screen. The distance from the 
lens of the projector to the screen and the video format determine the size of the 
projected image.
Minimum Di stance to 
Screen Offset Offset for 60in. Image
39.4/1.0m 15%+-5%9/22.9cm
60 inches 
high image
bottom of image 9 
inches above center 
of lens Projection angle
lens center
Table 1: IN112x (SVGA)/IN114x(XGA) Screen size Throw Ratio = 1.9 to 2.09
Diagonal Screen 
Size (inches/m)  Size of the 
Projected Image 
Width
(inches/m)Distance to screen
Minimum distance
(inches/m)
Maximum distance
(inches/m)
40”/1.0m 32”/0.8m 61”/1.6m 67”/1.7m
60”/1.5m 48”/1.2m 91”/2.3m 100”/2.6m
80”/2.0m 64”/1.6m 122”/3.1m 134”/3.4m
100”/2.5m 80”/2.0m 152”/3.9m 167”/4.3m
150”/3.8m 120”/3.1m 228”/5.8m 251”/6.4m
Table 2: IN116x (WXGA) Screen size  Throw Ratio = 1.5 to 1.8
Diagonal Screen 
Size (inches/m)  Size of the 
Projected Image 
Width
(inches/m)Distance to screen
Minimum distance
(inches/m)
Maximum distance
(inches/m)
40”/1.0m 38”/1.0m 58”/1.5m 69”/1.8m
60”/1.5m 58”/1.5m 87”/2.2m 104”/2.6m
80”/2.0m 77”/2.0m 115”/2.9m 138”/3.5m
100”/2.5m 96”/2.4m 144”/3.7m 173”/4.4m
150”/3.8m 144”/3.7m 216”/5.5m 260”/6.6m
Table 3: IN118HDx/IN119HDx (1080p) Screen size  Throw Ratio = 1.15 to 1.5
Diagonal Screen 
Size (inches/m) Size of the 
Projected Image 
Width
(inches/m)Distance to screen
Minimum distance
(inches/m)
Maximum distance
(inches/m)
40”/1.0m 43”/1.1m 49”/1.3m 64”/1.6m
60”/1.5m 64”/1.6m 74”/1.9m 96”/2.4m
80”/2.0m 85”/2.2m 98”/2.5m 128”/3.3m
100”/2.5m 107”/2.7m 123”/3.1m 160”/4.1m
150”/3.8m 160”/4.1m 184”/4.7m 240”/6.1m 
						

							7
Table 4: IN118HDxc/IN119HDxc (1080p) Screen sizeThrow Ratio = 1.4 to 1.7
Diagonal Screen 
Size (inches/m) Size of the 
Projected Image 
Width
(inches/m)Distance to screen
Minimum distance
(inches/m)
Maximum distance
(inches/m)
40”/1.0m 43”/1.1m 60”/1.5m 73”/1.9m
60”/1.5m 64”/1.6m 90/2.3m 109”/2.8m
80”/2.0m 85”/2.2m 120”/3.0m 145”/3.7m
100”/2.5m 107”/2.7m 150”/3.8m 182”/4.6m
150”/3.8m 160”/4.1m 224”/5.7m 272”/6.9m 
						

							8
Connecting a computer source
VGA connection
Connect one end of the provided computer cable to th Computer 1/Computer 2 
connector on the projector and the other to the VGA connector on your computer. If 
you are using a desktop computer, you will need to disconnect the monitor cable 
from the computer’s video port first.
HDMI connection
HDMI is a standard, uncompressed, all- digital audio/video interface. HDMI 
provides an interface betw een sources, such as set-top boxes, DVD players, and 
receivers and your projector. Plug an HDM I cable into the video-out connector on 
the video device and into the  HDMI connector on the projector.
Connecting power
Connect the black power cord to the  Power connector on the rear of the projector 
and to your electrical outlet. If the Powe r Saving Mode feature is off, the Power 
LED on the Status Indicator Panel ( page 12) blinks green. If the Power Saving 
Mode feature is on, the Power LED is steady  amber
 . By default, this feature is off. 
You can change the setting, see  page 29. NOTE : Always use the power cord that 
shipped with the projector.
Optional computer connections
To get sound from the projector, connect  an audio cable (optional cable, not 
included) to your computer and to th  Audio 1/Audio 2 connector on the projector. 
You may also need an adapter.
If you are using a desktop computer and want to see the image on your computer 
scr
 een as well as on the projection screen , connect to the desktop’s computer cable 
to Computer 1 and the desk top’s monitor cable to the Monitor Out connector on 
the projector. 
NOTE: 
Not available on the IN118HDxc or IN119HDxc.
connect VGA cable
connect HDMI
connect power
connect audio cable 
						

							9
Displaying an image
Press the Power button.
The Power LED blinks green,  and 
 the fans start to run. When the lamp comes on, 
the start up screen displays and the Power LE D turns solid green. It can take up to a 
minute for the image to achieve full bright ness. Note: When the feature, AC Power 
On, is enabled, the projector automaticall y turns on when power is connected. This 
allows control of ceiling  mounted projectors with a wall power switch.
No start up screen?  Get help 
 on page  13.
Turn on your computer or video device.
The image should appear  on the 
 projection screen. If it doesn’t, press the  Source 
button on the projector’s keypad or remote.
If you are using a VGA cable to conn ec
 t your computer to the projector:
If using a laptop, make sure its external video 
 port is active.
Many laptops do not automati ca
 lly turn on their external video port when a 
projector is connected. Usually a key comb ination like FN + F8 or CRT/LCD key 
turns the external display on and off. Lo cate a function key labeled CRT/LCD or a 
function key with a monitor symbol. Press FN and the labeled function key 
simultaneously. 
Refer to your laptop's documentation for more information about your 
lap
 top's key combination.
No laptop image?  T
 ry pressing the Auto Image button on the remote. Get 
help on  page 13.
press Power button
turn on computer or 
video device
activate laptop’s external port
monitor key or 
LCD/CRT key
FN key