Home > InFocus > Projector > InFocus Projector IN114x User Manual

InFocus Projector IN114x User Manual

    Download as PDF Print this page Share this page

    Have a look at the manual InFocus Projector IN114x User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 493 InFocus manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							30
    TimerAuto Off Time : aut
     omatically turns the projector off after no signals are 
    detected for a preset number of minutes. If an active signal is received before 
    the projector powers down, the image will be displayed.
    High Altitude Setting High Altitude : W
     e recommend you turn on the High Altitude Mode when 
    your environment is between 5000' ( 1500m) and 10,000' (3000m) above sea 
    level.
    Status/Service:
    Source Info : a read-only display of current source settings.
    Projector Info : a read-only 
     display of current projector settings and lamp 
    hours.
    Reset Lamp Hours... : resets 
     the lamp hours used counter in the Projector Info 
    menu to zero. Do this only after changing the lamp.
    Factory Reset...: 
     restores all settings to their default.
    Service Code... : only used by authorized service 
     personnel. 
    						
    							31
    Maintenance
    Cleaning the lens
    1Apply a non-abrasive camera lens cleaner to a soft, dry cloth.
    • Projector must be off and the le ns
      must be at room temperature.
    • Avoid using an excessive amount of  cleaner, and don’t apply the cleaner 
    directly to the lens. Abrasive cleane rs, solvents or other harsh chemicals 
    might scratch the lens.
    2Lightly wipe the cleaning cloth over the lens in a circular motion.
    WARNINGS: • Turn the projector off and unplug power cord before cleaning any part of the pro
     jector.
    • Do not touch or block the projector lens  with any objects as this can damage 
    the projector lens. Scratches, gouges a nd other lens damage are not covered 
    by the product warranty.
    • Do not open any cover on the projector, except the lamp cover.
    • Do not attempt to service this pr oduct yourself as opening and removing 
    covers may expose you to dangerous vol tage and other hazards. Refer all 
    servicing to qualified service personnel.
    Using the security lock
    The projector has a security lock for use with a Cable Lock System. Refer to the 
    information that came with the lock  for instructions on how to use it.
    Security Lock 
    						
    							32
    Replacing the projection lamp
    The Lamp Hours timer in the Projector Info menu counts the number of hours the 
    lamp has been in use.
    • NOTE: Be su
     re to use the InFocus lamp module designed for this projector. 
    You can order new lamps from  www.infocus.com (in select areas), your 
    retailer or your dealer.  Only genuine InFocus lamps are tested for use in this 
    projector.  Use of non InFocus lamps may cause electrical shock and fire, and 
    may void the projector warranty.  InFocu s is not liable for the performance, 
    safety or certificati on of any other lamps.
    WARNINGS :
    • The projector uses a high-pressure me r
     cury glass lamp.  The lamp may fail 
    prematurely, or it may rupture with  a popping sound if jolted, scratched, or 
    handled while hot.  The risk of lamp fa ilure or rupture also increases as the 
    lamp age increases; please replace the lamp when you see the “Replace Lamp” 
    message.
    • To avoid burns, allow the projector to  cool 
     for at least 60 minutes before you 
    replace the lamp.
    • Do not touch or block the projector lens  with any objects 
     as this can damage 
    the projector lens. Scratches, gouges a nd other lens damage are not covered by 
    the product warranty. 
    • Unplug the power cord before replacing the lamp.
    • Do not drop the lamp module. The glass 
     may shatter and cause injury.
    • Do not touch the glass surface of the  lamp module. 
     Fingerprints can obscure 
    projection sharpness and may ca use the glass to shatter.
    • Be extremely careful when removing the lamp housing. In the unlikely event  that 
     the lamp ruptures, small glass fra gments may be generated. The lamp 
    module is designed to contain most of  these fragments, but use caution when 
    removing it. 
    • Before replacing a ruptured lamp, clea n 
     the lamp compartment and dispose of 
    cleaning materials. Wash hands  after lamp replacement. 
    • When replacing the lamp while the  projector is 
     ceiling-mounted, wear 
    protective eyewear to prevent eye injury.
    Hg – Lamp contains  mercury. Manage in accordance with local disposal 
    laws. See  www.lamprecycle.org . 
    						
    							33
    1
    Turn off the projector and unplug the power cord.
    2Wait 60 minutes to allow the projector to cool thoroughly. 
    3Remove the lamp door, loca
    ted on top of the projector, by removing the screw 
    on the side of the lamp door, sliding the door right, and lifting the lamp door off.
    4Loosen the captive screws that attach  the lamp housing to the projector.  
    NOTE: I
    f the projector is installed on a  ceiling mount, be careful not to drop the 
    lamp module once the captive screws are loosened.
    5Carefully lift the lamp straight up, off of  the alignment pins; being careful not to 
    pinch the lamp connector. Dispose of th e lamp in an environmentally proper 
    manner.
    6Install the new lamp module, aligning the  pins properly. Be careful not to pinch 
    the lamp connector.
    7Tighten the screws. ( NOTE: If the pins have not been aligned properly, the 
    screws will not tighten securely.)
    8Replace the lamp door by (a) putting the la mp door down and (b) sliding it until 
    it locks.
    9Replace the lamp door screw and tighten securely.
    10Plug in the power cord and press the  Power button to turn the projector back on.
    11To reset the lamp hour ti mer, navigate to the Advanced Menu > Status/Service 
    menu and select  Reset Lamp Hours... .
    turn off and unplug 
    projector wait 60 minutes
    loosen screws 
    						
    							34
    Numerics
    3D Sync Invert 27
    A
    AC Power On 29
    Aspect Ratio 26
    Audio 1/Audio 2 8
    Auto Image 26
    Auto Off Time 30
    Auto Source 29
    AV Mute 28
    B
    Blank Key 28
    Blank Screen 28
    Brightness 26
    C
    Cable box 11
    Ceiling Mount 26, 28
    Closed Captions 28
    Color Space 27
    Computer 1 28
    Computer 1/Computer 2 8
    Computer 2 28
    ConnectingVideo device 11
    Contacting InFocus 19
    Contrast 26
    Customer service contact information 19 D
    Digital Zoom 28
    E
    Eco Blanking 29
    F
    Factory Reset 30
    Focus 10
    Freeze Screen 28
    G
    Gamma 27
    H
    HDMI 28
    HDTV 26
    High Altitude Setting 30
    Horizontal Position 27
    Horz Shift 28
    I
    Instant Power On 29
    Internal Speaker 28
    K
    Keypad 28
    Keypad buttons 22
    Keystone 26
    L
    Lamp Low Power 29
    M
    Magnify Level 28
    Menu Transparency 29 
    						
    							35
    menu usage 25
    Mute 28
    O
    Overscan 27, 28
    P
    Phase 27
    PIN Protect 29
    Power connector 8
    Power cord 8
    Power Saving Mode 29
    Prevent PC Screen Saver 27
    Programmed Dimming 29
    ProjectorConnecting video devices 11
    Keypad buttons 22
    Menus 25
    Positioning 6
    Setting up 6
    Troubleshooting problems 12
    Projector Info 28, 30
    R
    Rear Project 28
    Red/Green/Blue Gain 27
    Red/Green/Blue Offset 27
    remote control 20
    Resetting the projector 30
    S
    Screen Aspect 11 Search Screen 29
    Service 30
    Sharpness 26
    Show Messages 29
    Source 28
    Source Info 28, 30
    Sync Threshold 27
    T
    Tint 27
    Tracking 27
    Troubleshooting 12
    TV tuner 11
    U
    USB 5
    V
    Vert Shift 28
    Vertical Position 27
    Volume 26
    Volume button 21
    W
    Warranty 19
    Z
    zoom 10 
    						
    All InFocus manuals Comments (0)

    Related Manuals for InFocus Projector IN114x User Manual