InFocus Projector CP-x443 User Manual
Have a look at the manual InFocus Projector CP-x443 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 493 InFocus manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
21 Freezing the screen 1. Press the FREEZE button on the remote control. The “FREEZE” indication will appear on the screen, and the projector will enter the FREEZE mode. To exit the FREEZE mode and restore the screen to normal, press the FREEZE button again. ● The projector automatically exits the FREEZE mode when the input signal changes, or when one of the projector’s buttons or the remote control buttons of STANDBY/ON, ONE TOUCH, RGB, VIDEO, BLANK, AUTO,ASPECT, VOLUME, MUTE, KEYSTONE, POSITION and MENU is pressed. ● If the projector continues projecting a still image for long time, the LCD panel might possibly be printed. Do not leave the projector in FREEZE mode for too long. Temporarily blanking the screen 1. Press the BLANK button on the remote control. The blank screen will be displayed instead of the screen of input signal. Please refer to the item BLANK of section SCREEN menu ( 35 ). To remove the blank screen and return to the input signal screen, press the BLANK button again. ● The projector automatically returns to the input signal screen when the input signal changes, or when one of the projector’s buttons or the remote control buttons except the disk pad including the center button for the left click or the right mouse button is pressed. STANDBY/ONVIDEO UP DOWN BLANK ASPECT PUSH LASERINDICATOR LASER RGB ENTER ON OFF ESC POSITION MAGNIFY MUTE KEYSTONE FREEZE ONE TOUCH AUTO PA GE MENURESET VOLUME KEYST ONE STANDBY/ONVIDEO UP DOWN BLANK ASPECT PUSH LASERINDICA TOR LASER RGB ENTER ON OFF ESC POSITION MAGNIFY MUTE KEYSTONE FREEZE ONE TOUCH AUTO PA GE MENURESET VOLUME Operating
22 Operating the computer screen CAUTION ►Mistaken use of the mouse/keyboard control could damage your equipment. • While using this function, please connect only with a computer. • Before connecting, read the manuals of the computer you will connect. NOTE • It may not be possible to control notebook PC, and other computers with built-in pointing device (e.g. track ball), using this remote control. In this case, before connecting go into BIOS (system setup) and select external mouse, and disable the pointing device. In addition, the mouse may not function if the computer does not have the needed utility program. See your computer’s hardware manual for details. • The USB control can be used with Windows 95 OSR 2.1 or higher. It may not be possible to use the remote control, depending on the computer’s confi gurations and mouse drivers. • The USB control can be used only for the functions listed below. You cannot do things like press two buttons at once (for instance, pressing two buttons at the same time to move the mouse pointer diagonally). • This function is not available while the lamp is warming up (the POWER indicator fl ashes green), and while adjusting the volume and display, correcting for trapezoidal distortion, zooming in on the screen, using the BLANK function, or displaying the menu screen. USB mouse and keyboard control 1. Connect the projector’s USB port to the computer via the mouse cable. Available function Remote control operation Move pointer Move using on the disk pad Left click with mouse Press the center of the disk pad Right click with mouse Press right mouse button Press keyboard’s keys Flip the lever switch up /down , press buttons Press keyboard’s ENTER key Press ENTER button Press keyboard’s PAGE UP key Press PAGE UP button Press keyboard’s PAGE DOWN key Press PAGE DOWN button Press keyboard’s ESC key Press ESC button Operating
23 Operating STANDBY/ONVIDEOUPDOWNBLANK ASPECTPUSH LASERINDICATOR LASER RGB ENTER ONOFF ESCPOSITIONMAGNIFYMUTEKEYSTONEFREEZEONE TOUCH AUTO PA GE MENURESETVOLUME Multifunctional settings Using the menu function This projector has the following menus: PICTURE, IMAGE, VIDEO Qlty ., INPUT, SETUP, SCREEN, OPTION, NETWORK and EASY MENU. Each of these menus is operated using the same methods. The basic operations of these menus are as follows. 1. Press the MENU button on the remote control or one of the cursor buttons on the projector. The advanced MENU or EASY MENU will appear. At the EASY MENU 2. If you want to change it to the advanced MENU, select the "Go to Advanced Menu". 3. Use the cursor buttons ▲/▼ to select an item to operate. 4. Use the cursor buttons◄/► to operate the item. At the advanced MENU 2. Use the cursor buttons ▲/▼ to select a menu. If you want to change it to the EASY MENU, select the EASY MENU. Then press the cursor button ► on the projector or remote control, or the ENTER button on the remote control to progress. The display of the selected menu will be active. 3. Use the cursor buttons ▲/▼ to select an item to operate. Then press the cursor button ► on the projector or remote control, or the ENTER button on the remote control to progress. The operation menu of the selected item will appear. 4. Use the cursor buttons▲/▼ to operate the item. ● When you want to reset the operation, press the RESET button on the remote control during the operation. Note that items whose functions are performed simultaneously with operation (ex. LANGUAGE, H PHASE etc.) aren't reset. ● At the advanced menu, when you want to return to the previous display, press the cursor button ◄ on the projector or remote control, or the ESC button on the remote control. 5. Press the MENU button on the remote control again to close the menu and complete this operation. Even if you don't do anything, the dialog will automatically disappear after about 10 seconds. ● Some functions cannot be performed when a certain input port is selected, or when a certain input signal is displayed. RESET button ENTER button MENU button Cursor buttonsSTANDBY/ON INPU T KEYS TONE RESE TMENU POWER T E M P L A M P STANDBY/ONVIDEO UP DOWN BLANK ASPECT PUSH LASERINDICA TOR LASER RGB ENTER ONOFF ESCPOSITION MAGNIFYMUTE KEYSTONE FREEZE ONE TOUCH AUTO PA GE MENURESET VOLUME EASY MENU CONTRAST ASPECT 4:3 BRIGHT MODE NORMAL COLOR +0+0+0 TINT+0 SHARPNESS+3 WHISPER NORMAL RESET FILTER TIME 0 LANGUAGE ENGLISH Go To Advance Menu... MIRROR NORMAL MENU [RGB] IMAGE SETUP PICTURE INPUT OPTION NETWORK SCREEN SHARPNESS +0 BRIGHT ＋0 CONTRAST ＋0 COLOR +0 TINT +0 COLOR TEMP 6500K GAMMA DEFAULT 1 MY MEMORY SAVE 1 :SELECT VIDEO Qlty. EASY MENU
24 Multifunctional settings EASY Menu ItemDescription ASPECTUsing the buttons ◄/► switches the mode for aspect ratio. See the item ASPECT of section IMAGE menu(29). MODE Using the buttons ◄/► switches the mode of picture type. The modes of picture type are combinations of a mode of GAMMAand a mode of COLOR TEMP.Choose a suitable mode according to the projected source. NORMAL CINEMA DYNAMIC NORMAL: (COLOR TEMP = MIDDLE) + (GAMMA = #1 DEFAULT)CINEMA: (COLOR TEMP = LOW) + (GAMMA = #2 DEFAULT)DYNAMIC: (COLOR TEMP = HIGH) + (GAMMA = #3 DEFAULT) •When the combination of GAMMA and COLOR TEMP differs from pre-assigned modes above, the display on the menu for the MODE is “CUSTOM”. Please refer to the items GAMMA (26) and COLOR TEMP(27) of PICTURE menu. •When this function is performed, a certain extra such as a line may appear. BRIGHTUsing the buttons ◄/► adjusts the brightness. See the item BRIGHT of section PICTURE menu(26). CONTRASTUsing the buttons ◄/► adjusts the contrast. See the item CONTRAST of section PICTURE menu(26). COLORUsing the buttons ◄/► adjusts the strength of whole color. See the item COLOR of section PICTURE menu(27). TINTUsing the buttons ◄/► adjusts the tint. See the item TINT of section PICTURE menu(27). SHRPNESSUsing the buttons ◄/► adjusts the sharpness. See the item SHARPNESS of section PICTURE menu(27). WHISPERUsing the buttons ◄/► turns off/on the whisper mode. See the item WHISPER of section SETUP menu(34). With the EASY MENU, items shown in the table below can be performed. Select an item using the cursor buttons ▲/▼ on the projector or remote control. Then perform it referring to the following table. EASY MENU CONTRAST ASPECT 4:3 BRIGHT MODE NORMAL COLOR +0+0+0 TINT+0 SHARPNESS+3 WHISPER NORMAL RESET FILTER TIME 0 LANGUAGE ENGLISH Go To Advance Menu... MIRROR NORMAL
25 Multifunctional settings ItemDescription MIRRORUsing the buttons ◄/► switches the mode for mirror status. See the item MIRROR of section SETUP menu(34). RESET Performing this item resets all of the items of EASY MENU except FILTER TIME and LANGUAGE. A dialog is displayed to make sure. Selecting RESET using the button ▲ performs reset. FILTER TIME Performing this item resets the fi lter timer which counts use time of air fi lter.A dialog is displayed to make sure. Selecting RESET using the button ▲ performs reset. See the item FILTER TIME of section OPTION menu(39). LANGUAGESelect the LANGUAGE to toggle the menu language.Refer to description of LANGUAGE in the SCREEN menu(35). Go ToAdvanced Menu Select the “Go To Advanced Menu” to use the menu of PICTURE, IMAGE, VIDEO Qlty., INPUT, SETUP, SCREEN, OPTION or NETWORK. EASY Menu (continued)
26
Multifunctional settings
PICTURE Menu
ItemDescription
BRIGHTUsing the buttons ▲/▼ adjusts the brightness. : Light Dark
CONTRASTUsing the buttons ▲/▼ adjusts the contrast. : Strong Weak
GAMMA
Using the buttons ▲/▼ switches the GAMMA mode.
#1 DEFAULT #1 CUSTOM #2 DEFAULT
#3 CUSTOM#3 DEFAULT #2 CUSTOM
To adjust #1 CUSTOM, #2 CUSTOM or #3 CUSTOM
Selectinga mode of CUSTOMand then pressing the button ► or the ENTER button displays a dialog to aid you in adjusting the mode.This function is useful when you want to change the brightness of particular tones.
Choose an item using the buttons ◄/►, and adjust the level using the buttons ▲/▼.
You can display a test pattern for checking the effect of your You can display a test pattern for checking the effect of your Yadjustment by pressing the ENTER button.Each time you press the ENTER button, the pattern changes as below.
No pattern Gray scale of 9 steps
Ramp Gray scale of 15 steps
Eight of equalizing bars corresponds to eight of tone level of test
pattern except the darkest in the left end. If you want to adjust
the 2nd tone from left end on the test pattern, use the equalizing
adjustment bar “1”. The darkest tone at the left end of the test
pattern cannot be controlled with any of equalizing adjustment bar.
•When this function is performed, a certain extra such as a line
may appear.
With the PICTURE menu, items shown in the table below
can be performed.
Select an item using the cursor buttons ▲/▼ on the
projector or remote control, and press the cursor button ►
on the projector or remote control, or the ENTER button on
the remote control to progress. Then perform it referring to
the following table.
Ramp
1
+02
+03
+04
+05
+06
+07
+08
+0
GAMMA [CUSTOM 1]
ENTER :
MENU [RGB]
IMAGE
SETUP
PICTURE
INPUT
OPTION NETWORK
SCREEN SHARPNESS +0
BRIGHT ＋0 CONTRAST ＋0
COLOR +0 TINT +0
COLOR TEMP 6500K GAMMA DEFAULT 1
MY MEMORY SAVE 1
:SELECT
VIDEO Qlty.
EASY MENU
27
Multifunctional settings
ItemDescription
COLOR TEMP
Using the buttons ▲/▼ switches the mode of color temperature.
HIGH MIDDLE LOW CUSTOM
To adjust CUSTOM
Selecting the CUSTOM and then pressing the button ► or the ENTER button displaysa dialog to aid you in adjusting the OFFSET and/or GAIN of CUSTOM mode.
OFFSET adjustments change the color intensity on the whole tones of the test pattern.
GAIN adjustments mainly affect color intensity on the brighter tones of the test pattern.
Choose an item using the buttons ◄/►, and adjust the level using the buttons ▲/▼.
You can display a test pattern for checking the effect of your adjustment by pressing the ENTER button. Each time you press the ENTER button, the pattern changes as below.
No pattern Gray scale of 9 steps
Ramp Gray scale of 15 steps
•When this function is performed, a certain extra such as a line
may appear.
COLOR
Using the buttons ▲/▼ adjusts the strength of whole color.
Strong Weak
•This item can be selected only at a video signal.
TINT
Using the buttons ▲/▼ adjusts the tint.
Green Red
•This item can be selected only at a video signal.
SHARPNESSUsing the buttons ▲/▼ adjusts the sharpness.
Strong Weak
PICTURE Menu (continued)
Ramp
R
+0
G
+0
B
+0COLOR TEMP
ENTER :OFFSETR
+0
G
+0
B
+0
GAIN
28 Multifunctional settings ItemDescription MY MEMORY Selecting a mode of MY MEMORY using the buttons ▲/▼ and then pressing the button ► or the ENTER button performs each function. LOAD1 LOAD2 LOAD3 LOAD4 SAVE4 SAVE3 SAVE2 SAVE1 This projector has 4 numbered memories for adjustment data. Performing the LOAD1, LOAD2, LOAD3 or LOAD4 loads the data on the memory whose number corresponds with the command’snumber, and adjusts the picture automatically depending on the data.Performing the SAVE1, SAVE2, SAVE3 or SAVE4 puts the current adjustment data on the memory whose number corresponds with the command’s number. •Current adjustment data of the items in the PICTURE menu is stored.• Although adjustment data under the CUSTOM in the items of GAMMA and COLOR TEMP is not stored, it is memorized that the CUSTOM is selected. PICTURE Menu (continued)
29 Multifunctional settings IMAGE Menu ItemDescription ASPECT Using the buttons ▲/▼ switches the mode for aspect ratio. At a RGB/DVI signal4:3 16:9 NORMAL At a video signal / no signal4:3 16:9 SMALL • The NORMAL mode keeps the original aspect ratio of the signal. • At a HDTV signal of 1125i (1080i) or 750p (720p) of COMPONENT VIDEO input, this item can't be selected. • Performing the automatic adjustment initializes the aspect ratio setting. OVER SCAN Using the buttons ▲/▼ adjusts the over-scan ratio. Large (It reduces picture) Small (It magnifi es picture) • This item can be selected only at a video signal.• When this adjustment is too large, certain degradation may appear at the frame area of the picture. In such a case, please adjust small. V POSITION Using the buttons ▲/▼ adjusts the vertical position. Up DownThis itemis not selected when DVI-D input port is selected. H POSITION Using the buttons ▲/▼ adjusts the horizontal position. Left RightThis itemis not selected when DVI-D input port is selected. H PHASE Using the buttons ▲/▼ adjusts the horizontal phase to eliminate fl icker. Right Left • This item can be selected only at a RGB signal or a component video signal. Note that this does not work with the input signal of 525i(480i)/625i(576i) from the component video port. With the IMAGE menu, items shown in the table below can be performed. Select an item using the cursor buttons ▲/▼ on the projector or remote control, and press the cursor button ► on the projector or remote control, or the ENTER button on the remote control to progress. Then perform it referring to the following table. MENU [RGB] IMAGE PICTURE :SELECT AUTO ADJUST EXECUTE ASPECT 4:3 OVER SCAN 95 H PHASE 16 H SIZE 1344 H POSITION 142 V POSITION 25 SETUP INPUT OPTION EASY MENU SCREEN VIDEO Qlty. NETWORK
30 Multifunctional settings ItemDescription H SIZE Using the buttons ▲/▼ adjusts the horizontal size. Large Small • This item can be selected only at a RGB signal (except DVI-D). •When this adjustment is excessive, the picture may not be displayed correctly. In such a case, please reset the adjustment pressing the RESET button on the remote control during this operation. AUTO ADJUST EXECUTE Selecting this item performs the automatic adjustment feature. At a RGB signalThe vertical position, the horizontal position, the clock phase and horizontal size will be automatically adjusted.Make sure that the application window is set to its maximum size prior to attempting to use this feature. A dark picture may still be incorrectly adjusted. Use a bright picture when adjusting. At a video signalThe video format best suited for the respective input signal will be selected automatically.This function is available only when the AUTO mode is selected to the item VIDEO FORMAT of INPUT menu. For a component video signal, the signal type is identifi ed automatically independently of this function. •The automatic adjustment operation requires approximately 10 seconds. Also please note that it may not function correctly with some input. IMAGE Menu (continued)