Home > InFocus > Projector > InFocus Projector C410-420 User Manual

InFocus Projector C410-420 User Manual

    Download as PDF Print this page Share this page

    Have a look at the manual InFocus Projector C410-420 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 493 InFocus manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							40
    Cleaning the dust filter1
    Turn off the projector and unplug the power cable. 
    2
    Wait 60 minutes to allow the projector to cool thoroughly.
    WA R N I N G: To avoid burns, allow the projector to cool for at least 60 
    minutes before you clean or replace the dust filter.
    3
    Turn the projector upside down and remove the lamp door. See page 38.
    4
    Press the tab on the dust filter and lift it off.
    5
    Clean the filter using a vacuum set on low power.
    6
    Replace the dust filter and the lamp door.
    Using the security lockThe projector has a security lock for use with a cable lock system. See 
    “Accessories” on page 41 for ordering information. Refer to the information 
    that came with the lock for instructions on how to use it.
    computer 2
    network
    audio inLcomputer in
    trigger
    monitor out
    serial control
    R audio in
    computer 1USBmouse
    computer 3
    I
    O
    turn off and unplug
    the projector
    wait 60 minutes
    computer 2
    network
    audio inLcomputer in
    trigger
    monitor out
    serial control
    R audio in
    computer 1
    USB
    PS/2
    computer 3
    I
    O
     
    security lock 
    						
    							41
    AppendixAccessoriesNOTE: Use only approved accessories. Standard Accessories
    (ship with the projector)
    Part Number
    Shipping Box (with packaging) 111-0033-xx
    Protective Cover 110-0710-xx
    Computer Cable 6 ft (1.8 m) 516-0062-xx
    Audio/Video Cable 6 ft (1.8 m) 516-0051-xx
    Audio Cable 6 ft (1.8 m) 301398B
    Component to VESA Adapter SP-VESA-ADPT
    Power Cable*  516-0052-xx
    USB Cable 301378A
    Conductor Plus Remote HW-CONDUCTOR+
    Projection Lamp Module (included 
    in projector)SP-LAMP-012
    Lens Cap 340-1185-xx
    Quick Setup card 009-0657-xx
    User’s Guide with CD 010-0453-xx
    Safety Card 009-0659-xx
    Color-coded Cable Ties, 3 set SP-CABLETIES
    SCART Adapter* 301130
    *country-dependent
    Optional Accessories  Part Number
    Shipping Case (ATA approved)  CA-ATA-017
    Projector Mount SP-CEIL-005-B
    False Ceiling Plate for Projector Mount SP-LTMT-PLT
    Extension Arm for Projector Mount 
    26” - 47”SP-LTMT-EXTP
    Short Throw Lens LENS-020
    Long Throw Lens LENS-021
    DVI-D Cable 6 ft (1.8 m) SP-DVI-D
    LiteShow Wireless Connection LP-LITESHOW
    ProjectorNet Software SW-PN2-1CD
    VGA Cable/Line Amp Extension, 50 ft 
    (15m)-DomesticSP-VGAEXT50-D
    VGA Cable/Line Amp Extension, 50 ft 
    (15m)-InternationalSP-VGAEXT50-I
    Audio/Video Cable, 30 ft (9m) SP-AV30
    Projector Cable Lock System SP-LOCK-B
    50” Diagonal Screen (portable) A650
    60” Diagonal Screen (portable) HW-DLXSCRN
    84” Diagonal Wall/Ceiling Mounted Screen HW-WALLSCR84
    Replacement Lamp Module SP-LAMP-012
    MindPath RF PocketPoint Remote HW-RF-POCKTPNT
    IR Presentation Remote Control HW-PRESENTER
    IR Integrator Remote Control HW-INTEGRATOR 
    						
    							42
    Red LED behavior and projector errorsIf the projector is not functioning properly and the red LED is blinking, con-
    sult Ta b l e  2 to determine a possible cause. There are two second pauses 
    between the blinking cycles. Visit our website for more details on the red 
    LED error codes. See the inside back cover for contact information.
    Projected image size
    Table 2: 
    Red LED Behavior Explanation
    One (1) blink The lamp wont strike after five (5) 
    attempts. Check the lamp and lamp door 
    installations for loose connections.
    Two (2) blinks The lamp counter hours have exceeded 
    lamp life hours. Replace the lamp and 
    reset the lamp hours counter.
    Three (3) blinks The projector has shut down the lamp. 
    Replace the lamp. Contact Technical Sup-
    port for repair if replacing the lamp does 
    not solve the problem.
    Four (4) blinks The fan has failed. Contact Technical Sup-
    port for repair.
    Five (5) blinks The projector is overheating. Check for a 
    blocked air vent. Contact Technical Sup-
    port for repair if clearing the air vents 
    does not solve the problem.Table 3: 
    Image sizes for standard lens
    Distance to 
    screen 
    (feet/m) Minimum 
    Width
    (feet/m) Maximum
    Width 
    (feet/m)
    5/1.52 2.08/.64 2.78/.85
    8/2.44 3.33/1.02 4.44/1.35
    12/3.66 5.0/1.52 6.67/2.03
    16/4.88 6.67/2.03 8.89/2.71
    20/6.1 8.33/2.54 11.11/3.39
    30/9.14 12.5/3.81 16.67/5.08
    33/10.1 13.75/4.19 18.33/5.59
    Table 4: 
    Image sizes for long throw lens
    Distance to 
    screen 
    (feet/m) Minimum 
    Width
    (feet/m) Maximum
    Width 
    (feet/m)
    16/4.88 3.02/0.92 5.33/1.63
    20/6.1 3.77/1.15 6.67/2.03
    30/9.14 5.66/1.73 10/3.05
    40/12.19 7.55/2.3 13.33/4.06
    50/15.24 9.43/2.88 16.67/5.08
    100/30.48 18.87/5.75 33.33/10.16 
    						
    							43
    NOTE: Visit our website for an interactive image size calculator.Table 5: 
    Image sizes for short throw lens (fixed focus)
    Distance to 
    screen 
    (feet/m) Width
    (feet/m)
    3/.91 2.5/.76
    5/1.52 4.17/1.27
    8/2.44 6.67/2.03
    12/3.66 10/3.05
    16/4.88 13.33/4.06
    20/6.1 16.67/5.08 
    						
    							44
    Numerics
    1024x768 resolution 5
    A
    About 35
    Aspect Ratio 35
    audio 26
    Audio In connector 7, 13
    audio volume 15
    Auto Image 35
    Auto Power 33
    B
    Blank 35
    blinking green 16
    blinking red 16
    Brightness 12
    C
    cables
    optional 41
    standard 41
    changing the lens 37
    cleaning the dust filter 40
    cleaning the lens 37
    Color 15
    colors are incorrect 21
    component cable connector 13
    computer connections
    optional 7
    required 7
    computer image
    optimize 27
    troubleshooting 17
    connector panel 6
    contacting InFocus 23Contrast 12, 15
    custom logo
    startup screen 34
    customer service contact information 23
    D
    Default gateway 36
    DHCP 36
    Display Messages 33
    displaying
    computer image 9
    PiP 35
    video image 14
    Drivers 10
    USB 11
    Windows 98 11
    dust filter, cleaning 40
    E
    Effect Key 35
    elevator foot 12
    F
    first time use
    driver installation 10
    focus 12, 15
    Freeze 35
    fuzzy image 19 
    						
    							45
    I
    image
    display computer 9
    display video 14
    image does not fit screen 20
    image not centered 23
    image not sharp 20
    image not square 20
    image reversed 21
    image size matrix 42
    image upside down 21
    Info
    network 36
    IP Address 36
    K
    Keystone 12, 15
    L
    lamp replacement 38
    lamp won’t turn on 22
    Language 36
    laptop
    connecting 7
    external video port 9
    LED
    blinking green 16
    blinking red 22
    solid green 16
    solid red 22
    LED behavior 16
    lens
    changing 37
    cleaning 37
    leveling foot 12
    Low Power 33M
    Main menu 29
    menu system 29
    Monitor connector 7
    mouse, using your 7
    Mute 35
    N
    Network 36
    Network connector 8
    Network Info 36
    no computer image 18
    no startup screen 17
    O
    only startup screen appears 17
    optional accessories 41
    P
    Picture in Picture 35
    Picture menu 30
    PiP 35
    Power button 14
    power cable 7, 13
    Power Save 33
    PowerPoint
    remote’s mouse buttons 25
    presentation features 27
    projector
    connector panel 6
    customizing 28
    optional accessories 41
    shutdown 16
    standard accessories 41
    troubleshooting problems 16
    projector height 12, 14
    projector positioning 12, 14 
    						
    							46
    R
    Rear 33
    remote control 25
    not working 19
    replacing the lamp 38
    RS-232
    cable 8
    connecting 6
    S
    screen trigger 6
    security lock 40
    serial connection 6
    Settings menu 33
    shutdown
    projector 16
    solid green 16
    solid red 16
    Source 35
    Source troubleshooting 17
    Sources 33
    standard accessories
    projector 41
    Subnet mask 36
    S-video connector 13
    T
    Tint 15
    trigger, screen 6
    Troubleshooting 16, 17
    U
    USB, using your mouse 7V
    Video button 14
    video connections
    optional 13
    standard 13
    Video connector 13
    video images
    optimizing 28
    W
    warranty 23, 47
    Windows 2000 11
    Windows 98 10
    Windows ME, XP 11
    X
    XGA 5
    Z
    zoom 12, 15, 35 
    						
    							IF YOU NEED ASSISTANCE....
    For all types of Ser vice and Suppor t information on our products 
    and ser vices please go to our website at www.askproxima.com
    Many resources are available on our website. 
    Some examples are:
    •Frequently Asked Questions about general 
    projector usage and technical issues
    •E-mail suppor t
    •Online product registration
    •Product data sheets
    •Optional accessories
    •Technical specifications, interactive image size calculator, 
    laptop activation commands and more!
    WARNING:This product contains chemicals,
    including lead, known to the State of California
    to cause bir th defects or other reproductive
    harm.Wash hands after handling.
    WARNING:This product has a lamp which 
    contains a ver y small amount of mercur y.
    Dispose of it as required by local, state, or 
    federal ordinances and regulations. For more
    information, see www.eiae.org 
    						
    							User’s 
    Guide
    InFocus Corporation
    27700B SW Parkway Avenue 
    Wilsonville, Oregon 97070-9215
    1-800-294-6400 
    •503-685-8888
    Fax : 503-685-8887
    http://www.infocus.com
    In Europe: 
    InFocus International B.V.
    Strawinskylaan 585
    1077 XX Amsterdam,The Netherlands
    Phone: +31 20 579 2000
    Fax: +31 20 579 2999
    In Asia : 
    238A Thomson Road
    #18-01/04 Novena Square
    Singapore 307684
    Telephone: (65) 6334-9005
    Fax : (65) 6333-4525
    > > > >> >>  
    						
    All InFocus manuals Comments (0)

    Related Manuals for InFocus Projector C410-420 User Manual