InFocus LP500 Projector User Manual

55
APPENDIX
Specifications
The projector must be operated and stored within the tempera-
ture and humidity ranges specified. 
Te m p e r a t u r e
Operating
50 to 104
° F (10 to 40° C) at sea level
50 to 95
° F (10 to 35° C) at 10,000 feet
Non-operating
-4 to 158
° F (-20 to 70° C)
Altitude
Operating 0 to 10,000 feet (3,048 meters) 
Non-operating 0 to 20,000 feet (6,096 meters)
Humidity
Operating and non-oper. 10% to 95% relative humidity, non-condensing
Dimensions
10.25 x 3.34 x 11 inches (26 x 8.5 x 28...

56
Appendix
Accessories
NOTE: Use only InFocus-
approved accessories. Other
products have not been tested with
the projector.Power Cords (one ships with projector, type depends on country)
NOTE: You can purchase these
items by contacting your dealer or
InFocus Catalog Sales at
1-800-660-0024.Optional AccessoriesStandard Accessories 
(ship with the projector) Part Number
Quick Start card 009-0581-xx
User’s Guide 010-0286-xx
Soft Case 110-0423-xx
Shipping Box 110-0421-xx
Analog Computer Cable 6 ft (1.8 m)...

57
50’ Mac Cable-Domestic SP-MAC50-D
50’ Mac Cable-International SP-MAC50-I
15’ VGA Extension Cable SP-VGA15
50’ VGA Cable-Domestic SP-VGA50-D
50’ VGA Cable-International SP-VGA50-I
USB Ranger 400 System HW-USBRNGR4 
HW-USBRNGR4-I
LP500/530 LM+ Ceiling Mount SP-CEIL-LMP5
Black LiteMount Pipe Tubing Extension SP-LTMT-EXT
LiteMount False Ceiling Plate SP-LTMT-PLT
Component Video Adapter Cable 210-0206-xx
Appian Traveler (Digital/Analog CardBus PC 
Card)SP-DVI-CARD
PC Guardian Projector Cable Lock SP-LOCK...

58
Appendix
Portable and Laptop Activation Chart
NOTE: Visit our website at
www.infocus.com for the most
current activation chart. It is
located in the Technical Library in
the Service and Support section.
Many laptop computers do not automatically turn on their exter-
nal video port when a projector is connected. Activation com-
mands for some laptop computers are listed in the following 
table. (If your computer is not listed or the given command does 
not work, refer to the computer’s documentation...

59
Bondwell LCD or CRT options after 
bootupreboot for LCD or CRT 
options to appear
Chaplet** setup screen setup screen
FN-F6 FN-F6
FN-F4 FN-F4
Chembook FN-F6 FN-F6
Commax Ctrl-Alt-#6 Ctrl-Alt-#5
Compaq* ** Ctrl-Alt-< Ctrl-Alt->
FN-F4 FN-F4
automatic automatic
mode/? (for setup option) mode/? (for setup option)
Compuadd* ** automatic automatic
Alt-F for screen setup 
optionAlt-F for screen setup 
option
Data General Ctrl-Alt-Command Ctrl-Alt-Command
Data General 
Wa l k a b o u t2 CRT/X at DOS prompt...

60
Appendix
Gateway FN-F3
FN-F1/FN-F1 again simul-
taneousFN-F3
FN-F1
Grid* ** FN-F2, choose auto or 
simultaneousFN-F2
Ctrl-Alt-Tab Ctrl-Alt-Tab
Hitachi FN-F7 FN-F7
Honeywell FN-F10 FN-F10
Hyundai setup screen option setup screen option
IBM 970* automatic warm reboot
IBM ThinkPad** reboot, enter setup menu FN-F2
FN-F7, select choice from 
setup menu
FN-F1, select choice
FN-F5, select choice
PS/2 SC select choice 
(CRT, LCD, etc.)
Infotel FN-F12 FN-F12
Kaypro boot up, monitor plugged 
inunplug monitor...

61
Mastersport FN-F2 FN-F1
Micro Express* automatic warm reboot
Micron FN-F2 FN-F2
Microslate* automatic warm reboot
Mitsubishi SW2 On-Off-Off-Off SW2 Off-On-On-On
NCR setup screen option setup screen option
NEC* ** setup screen option setup screen option
CRT at the DOS prompt LCD at the DOS prompt
FN-F3 FN-F3
Olivetti* automatic automatic
FN-O/* FN-O/*
Packard Bell* ** FN-F0 FN-F0
Ctrl-Alt-< Ctrl-Alt->
Panasonic FN-F2 FN-F2
Prostar Ctrl-Alt-S at bootup Ctrl-Alt-S at bootup
Samsung* setup screen option...

62
Appendix
* These manufacturers have models that automatically send video 
to the external CRT port when some type of display device is 
attached.
** These manufacturers offer more than one key command depend-
ing on the computer model. WinBook Ctrl-Alt-F10 Ctrl-Alt-F10
Wyse software driven software driven
Zenith** FN-F10 FN-F10
FN-F2 FN-F2
FN-F1 FN-F1
Zeos** Ctrl-Shift-D
FN-F1Ctrl-Shift-D
FN-F1 ComputerKey command to 
activate portKey command to
de-activate port 

63
Using Video Mirroring with a PowerBook Computer
When you turn video mirroring (called SimulScan in newer Pow-
erBooks—see below) on, the projector displays the same informa-
tion that appears on your PowerBook’s built-in screen. When 
video mirroring is off, the projector acts like a separate display.
To turn on video mirroring for the first time:
1Open the Monitors control panel; click on Monitor 2.
2Set the number of colors you want.
3Open the Control Strip, then click on the monitor icon.
4Select...

64
Appendix
Projected Image Size
NOTE: Use the graph and table
to help you determine projected
image sizes.
F
IGURE 38
Projected image size
NOTE: Visit our website at
www.infocus.com for an interactive
image size calculator. It is located
in the Technical Library in the
Service and Support section.
50 100 150
200
250
5
10 015
20 25 30
Diagonal Image Size (inches)
Distance to Screen (feet)
maximum image size
minimum image size
Table 1: 
Range of distance to the screen for a given screen size
Diagonal...