InFocus LP130 Projector User Manual
Here you can view all the pages of manual InFocus LP130 Projector User Manual. The InFocus manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 41
35 The most current troubleshooting information can be found in the Service and Support section of our website at http://www.infocus.com/service. You’ll also find a Technical Library, FAQs, and support contacts including a technical sup- port e-mail form. Before calling your dealer or InFocus Technical Support for assis- tance, please have the following information available: the projector ’s serial number (located on the bottom label) the resolution of your computer. Call InFocus Technical Support...
Page 42
36 Maintenance & Troubleshooting
Page 43
37 APPENDIX Specifications The projector must be operated and stored within the tempera- ture and humidity ranges specified. Te m p e r a t u r e Operating 50 to 104 ° F (10 to 40° C) at sea level 50 to 95 ° F (10 to 35° C) at 10,000 feet Non-operating -4 to 158 ° F (-20 to 70° C) Altitude Operating 0 to 10,000 feet (3,048 meters) Non-operating 0 to 20,000 feet (6,096 meters) Humidity Operating and non-oper. 10% to 95% relative humidity, non-condensing Dimensions 6.25 x 8.25 x 2 inches (15.9 x 21.0 x...
Page 44
38 Appendix Accessories NOTE: Use only InFocus- approved accessories. Other products have not been tested with the projector.Power Cords (one ships with projector, type depends on country)Standard Accessories (ship with the projector) Part Number Quick Start card 009-0526-xx User’s Guide 010-0251-xx Soft Case 110-0342-xx Shipping Box 110-0343-xx Analog Computer Cable 6 ft (1.8 m) 210-0185-xx Composite RCA Video Cable 6 ft (1.8 m) 210-0192-xx S-video Cable 6 ft (1.8 m) 210-0193-xx Remote 590-0379-xx...
Page 45
39 NOTE: You can purchase these items by contacting your dealer or InFocus Catalog Sales at 1-800-660-0024. Optional AccessoriesDeluxe Travel Case CA-WHL340 Executive Leather Case CA-EXE-340 Hard Travel Elite Porter Case CA-HD-PORTERELT Projection Lamp Module SP-LAMP-LP1 Digital Computer Cable SP-DVI-D Digital/Analog Interface Card SP-DVI-CARD USB Ranger 400 System HW-USBRNGR4 HW-USBRNGR4-I Macintosh Adaptor SP-MACADPT Executive Plus Remote HW-EXPLUS Full-Feature LaserPro Remote Control...
Page 46
40 Appendix Portable and Laptop Activation Chart NOTE: Visit our website at www.infocus.com for the most current activation chart. It is located in the Technical Library in the Service and Support section. Many laptop computers do not automatically turn on their exter- nal video port when a projector is connected. Activation com- mands for some laptop computers are listed in the following table. (If your computer is not listed or the given command does not work, refer to the computer ’s documentation...
Page 47
41 Bondwell LCD or CRT options after bootupreboot for LCD or CRT options to appear Chaplet** setup screen setup screen FN-F6 FN-F6 FN-F4 FN-F4 Chembook FN-F6 FN-F6 Commax Ctrl-Alt-#6 Ctrl-Alt-#5 Compaq* ** Ctrl-Alt-< Ctrl-Alt-> FN-F4 FN-F4 automatic automatic mode/? (for setup option) mode/? (for setup option) Compuadd* ** automatic automatic Alt-F for screen setup optionAlt-F for screen setup option Data General Ctrl-Alt-Command Ctrl-Alt-Command Data General Wa l k a b o u t2 CRT/X at DOS prompt...
Page 48
42 Appendix Gateway FN-F3 FN-F1/FN-F1 again simul- taneousFN-F3 FN-F1 Grid* ** FN-F2, choose auto or simultaneousFN-F2 Ctrl-Alt-Tab Ctrl-Alt-Tab Hitachi FN-F7 FN-F7 Honeywell FN-F10 FN-F10 Hyundai setup screen option setup screen option IBM 970* automatic warm reboot IBM ThinkPad** reboot, enter setup menu FN-F2 FN-F7, select choice from setup menu FN-F1, select choice FN-F5, select choice PS/2 SC select choice (CRT, LCD, etc.) Infotel FN-F12 FN-F12 Kaypro boot up, monitor plugged inunplug monitor...
Page 49
43 Micro Express* automatic warm reboot Micron FN-F2 FN-F2 Microslate* automatic warm reboot Mitsubishi SW2 On-Off-Off-Off SW2 Off-On-On-On NCR setup screen option setup screen option NEC* ** setup screen option setup screen option CRT at the DOS prompt LCD at the DOS prompt FN-F3 FN-F3 Olivetti* automatic automatic FN-O/* FN-O/* Packard Bell* ** FN-F0 FN-F0 Ctrl-Alt-< Ctrl-Alt-> Panasonic FN-F2 FN-F2 Prostar Ctrl-Alt-S at bootup Ctrl-Alt-S at bootup Samsung* setup screen option setup screen option Sanyo...
Page 50
44 Appendix * These manufacturers have models that automatically send video to the external CRT port when some type of display device is attached. ** These manufacturers offer more than one key command depend- ing on the computer model. Wyse software driven software driven Zenith** FN-F10 FN-F10 FN-F2 FN-F2 FN-F1 FN-F1 Zeos** Ctrl-Shift-D FN-F1Ctrl-Shift-D FN-F1 ComputerKey command to activate portKey command to de-activate port