InFocus LP 260 Projector User Manual

23
Gamma
Press the point left or right button to obtain better contrast from 0 
to 16.
Auto Image menu
Auto image automatically adjusts fine sync, total dots, and image 
position for most computers. You can turn these automatic 
adjustments off and set these parameters manually, if desired.
1Select Auto Image in the menu.
The “Auto Adjust Image” menu appears.
2Move the arrow to the desired parameter using the up and 
down 
point buttons.
3Press 
select to turn the automatic adjustments on and off. 
Fine...

24
Using the Projector
Po s i t i o n  m e n u
You can move the image up, down, left and right using this 
menu.
1Select the Position menu.
The “Position” menu appears.
2Use the 
point buttons to adjust the position.
Press the 
select button to chose a position. To cancel this adjust-
ment, press any button except the 
point buttons. 
position menu 

25
Screen menu
1Select the Screen menu.
The “Screen Adjustments” menu appears.
.
2Move the cursor to the desired feature.
Tr u e
NOTE: True and Digital Zoom 
are not available when RGB, 
HDTV1035i, or HDTV1080i is 
selected in the System menu.
Select True to display the image in its original size. If the original 
size is larger than 800x600, the projector enters Digital Zoom 
automatically.
Ke y s t o n e
Select Keystone to adjust the image vertically and make a squarer 
image. The menus disappear and...

26
Using the Projector
Video Adjustments
Select Video mode by pressing the 
source button on the keypad, 
pressing the 
video button on the remote, or clicking the video icon 
in the menu. 
Video Source menu
The projector automatically detects the signal from any con-
nected video sources. If more than one source is connected, use 
the Video Source menu to select the desire one.
1Press the 
menu button, navigate to the Video Source menu, 
then press the 
select button.
The “Video Source” menu appears....

27
Video System menu
1Press the 
menu button, navigate to the System menu, then 
press the 
select button.
The “Video System” menu appears. 
2Press the 
point down button and position the red arrow by the 
desired source.
When the video signal is from the Video or S-Video jack:
Auto
In this mode, the projector automatically detects the incoming 
video source and adjusts itself to optimize performance. When 
the video system is PAL-M or PAL-N, select the system manually....

28
Using the Projector
When the video signal is from the Y, Pb/Cb, Pr/Cr jacks:
Auto
In this mode, the projector automatically detects the incoming 
video source and adjusts itself to optimize performance. 
Component Video Signal Format
If the projector can’t display the proper video signal, select the 
component signal format from the menu. 

29
Screen menu
1Press the 
menu button, navigate to the Screen menu, then 
press the 
select button.
The “Video Screen” menu appears.
2Press the 
point down button and position the red arrow by the 
desired option.
Regular Screen
Normal video image size with 4x3 aspect ratio.
Wide Screen
Resizes the image for wide screen size with 16x9 aspect ratio.
Ke y s t o n e
This option helps to keep the image square as the angle of projec-
tion is changed. When you select Keystone, the menus disappear 
and the...

30
Using the Projector
Image Menu
1Press the 
menu button, navigate to the Image menu, then 
press the 
select button.
The “Image Adjustments” menu appears.
2Press the 
point down button and position the red arrow by the 
parameter you want to adjust. To change a value, press the 
point left or right button.
Color
The color setting adjusts a video image from black and white to 
fully saturated color. Press the 
point left button to decrease the 
amount of color in the image, press the 
point right button...

31
Contrast
The contrast controls the degree of difference between the lightest 
and darkest parts of the picture. Adjusting the contrast changes 
the amount of black and white in the image. Press the 
point left 
button to decrease the contrast, press the 
point right button to 
increase the contrast, making the blacks appear blacker and the 
whites appear whiter.
Brightness
Adjusting the brightness changes the intensity of the image. Press 
the 
point left button to darken the image, press the point...

32
Using the Projector
Setting menu
1Press the 
menu button, navigate to the Setting menu, then 
press the 
select button.
The “Other Projector Setting” menu appears.
2Press the 
point down button and position the red arrow by the 
parameter you want to adjust. To change a value, press the 
point left or right button. To turn a setting on and off, press the 
select button.
Vo l u m e
NOTE: Changing the volume
using the menu is the same as
changing it using the remote.
Press the point left button to...