Indesit Idl 44 Installation Manual

IDL 40
Dishwasher
Installation and use
 

1EN
Safety Is a Good Habit to Get Into
NOTICE
Carefully read the instructions contained in this manual, as
they provide important information which is essential to safe
and proper installation, use and maintenance of the
appliance.
This appliance complies with the following
EEC directives:
- 73/23/EEC of 19/02/73 (Low Voltage) and subsequent
modifications;
- 89/336/EEC of 03/05/89 (Electromagnetic Compatibility)
and subsequent modifications.
- 97/17/EEC Labelling
-02/96/CE (Waste Electrical
and...

2EN
Close-up View (Interior)
Upper Rack
Top Sprayer Arm
Rack Height Adjustor
Lower Rack
Bottom Sprayer Arm
Salt Container Cap
Washing Filter
Detergent and Rinse Aid Dispenser
J
L
K
H
F
E
G
I
Technical characteristics
Width cm. 45
Depth cm.  60
Height cm.  85
Capacity 9 standard place settings
Mains water pressure                                                       4,3 psi - 145 psi  30KPa÷ 1MPa  (0,3 ÷10 bar)
Power voltage See data plate
Total absorber power See data plate
Fuse See data plate
 

3EN
Salt ......
Salt
The hardness of the water varies from place to place. If
hard water is used in the dishwasher, deposits will form on
the dishes and utensils.
The appliance is equipped with a special softener that uses
a salt specifically designed to eliminate lime and  minerals
from the water.
Loading the Salt into the Softener
Always use salt intended
for use with dishwashers.
The salt container is
located beneath the
lower rack and should be
filled as follows:
1. Remove the lower rack
and then...

4EN
Detergent and Rinse Aid ....
Detergent
Detergent specifically intended for use with dishwashers
must be used. The dispenser must be refilled before the
start of each wash cycle following the instructions provided
in the Wash Cycle Table. The detergent dispenser is
located on the inside panel of the door.
Loading the detergent
To open lid A, press button B. The cleaning detergent
should be introduced  into the two containers Cand D
up to the rim.
After pouring in the detergent, replace the lid,...

5EN
Loading the Dishwasher
Before placing the dishes in the dishwasher, remove the
larger food particles to prevent the filter from becoming
clogged, which results in reduced performance.
If the pots and pans have baked-on food that is extremely
hard to remove, we recommend that they be allowed to
soak before they are washed. This will eliminate the need
for extra wash cycles.
Pull out the racks to facilitate loading the dishwasher.
How to Use the Lower Rack
We recommend that you place the most difficult...

6EN
Turning on the Appliance
First of all.
Turn on the water tap completely and press ON-OFF button
A,  and the indicator light B goes on.
Now the appliance is on and awaiting instructions.
Starting and selecting the cycle.
Turn the cycle selector knob D clockwise until the reference
notch on the knob corresponds with the number or symbol
for the cycle you wish to set (consult the wash cycle table on
page 7, especially when first using the appliance).
If the appliance door is shut, press the Start button...

7EN
Wash Cycle Table
Dishwasher washing guarantees your dishes will be cleaned in a hygienic setting for
safer, cleaner results.
&\FOH&\FOH  V H OH FWLRQ
LQV WUXF WLR QV&\ F OH  GH V F ULSWLR QHWHUJHQW
IRU SUH 
ZD V K  
ZD V K5LQVH
$LG:D V K  F \ F O H
GXUD WLR Q
WROHUDQFH
“
7LPH 

8EN
Energy Saving Tips
- It is important to try and run the dishwasher when it is fully
loaded in order to save on energy. In order to prevent odors
from forming and food from caking onto the dishes, you
can run the hold cycle.
- Choose the right wash cycle: the choice of cycle depends
on the type of dishware, cookware and utensils being
washed and how dirty they are.- Use the right amount of detergent: if you use too much
detergent, the result will not be cleaner dishes, but, rather,
a greater negative...