Iiyama Prolite P1704s User Manual

USER MANUAL
Thank you very much for choosing the iiyama
LCD monitor.
We recommend that you take a few minutes to
read carefully through this brief but
comprehensive manual before installing and
switching on the monitor. Please keep this
manual in a safe place for your future
reference.
 ENGLISH
DEUTSCH
FRANCAIS
POLSKINEDERLANDS
PLP1704S-e-COVER 508.P65 2007/05/09, 10:121
 

 ENGLISH
Congratulations!
The display you have just purchased carries the TCO’03 Displays
label. This means that your display is designed, manufactured
and tested according to some of the strictest quality and
environmental requirements in the world. This makes for a high
performance product, designed with the user in focus that also
minimizes the impact on our natural environment.
Some of the features of the TCO’03 Display requirements:
Ergonomics
• Good visual ergonomics and image quality in order to...

 ENGLISH
CE MARKING DECLARATION OF CONFORMITY
This LCD monitor complies with the requirements of the EC Directive 89/336/EEC “EMC Directive” and 73/23/
EEC “Low Voltage Directive” as amended by Directive 93/68/EEC.
The electro-magnetic susceptibility has been chosen at a level that gives correct operation in residential areas,
business and light industrial premises and small-scale enterprises, inside as well as outside of the buildings.
All places of operation are characterised by their connection to the...

 ENGLISH
1     FOR YOUR SAFETY
FOR YOUR SAFETY
WARNING
STOP OPERATING THE MONITOR WHEN YOU SENSE TROUBLE
If you notice any abnormal phenomena such as smoke, strange sounds or fumes, unplug the monitor
and contact your dealer or iiyama service center immediately. Further use may be dangerous and
can cause fire or electric shock.
NEVER REMOVE THE CABINET
High voltage circuits are inside the monitor. Removing the cabinet may expose you to the danger of
fire or electric shock.
DO NOT PUT ANY OBJECT INTO THE...

 ENGLISH
CAUTION
INSTALLATION LOCATION
Do not install the monitor where sudden temperature changes may occur, or in humid, dusty or smoky
areas as it may cause fire, electric shock or damage. You should also avoid areas where the sun
shines directly on the monitor.
DO NOT PLACE THE MONITOR IN A HAZARDOUS POSITION
The monitor may topple and cause injury if not suitably located. Please also ensure that you do not
place any heavy objects on the monitor, and that all cables are routed such that children may...

 ENGLISH
The following symptoms are normal with LCD monitors and do not indicate a problem.
NOTEWhen you first turn on the LCD monitor, the picture may not fit in the display area
because of the type of computer that is used. In this case, adjust the picture
position to the correct position. „
Due to the nature of the LCD screen, an afterimage of the previous screen may
remain after switching the image, when the same image is displayed for hours. In
this case, the screen is recovered slowly by changing...

 
1 
English 
Deutsch
 
Français
 Polski Nederlands     
TABLE OF CONTENTS
 
 
TABLE OF CONTENTS        1 
CHEKING THE CONTENTS OF THE PACKAGE    1 
CONNECTING         2 
WALL MOUNTING                     3 
STARTUP                                4 
BASIC SETUP         4 
IMAGE SETTINGS USING THE OSD MENU     5 
OSD MENU FUNCTIONS                                6 
TROUBLESHOOTING        8 
TECHNICAL SPECIFICATIONS       9 
RECYCLING INFORMATION           10 
 
CHEKING THE CONTENTS OF THE PACKAGE  
 
The...

CONNECTING 
・To connect the monitor to your PC 
1.    Make sure that the PC  and the monitor is unplugged. 
2.   Connect the 15-pin signal cable to the monitor and The PC (see fig. 2a) 
3.   If you have a graphic card with a digital DVI-D connector (24-pin socket), then 
connect one end of the DVI-D cable to the DVI-D connector of your monitor (see 
fig. 2b), the other end to the computer. 
 
 
2 
 
 
 
 
 
 
 
 
  
 
Signal cable 
Figure 2a.Connecting the monitor to the PC...

 
3 
English ・To connect the monitor to the power source 
Connect the separate power cable ( ②in fig. 3) to the Monitor and a grounded 
outlet. 
 
Deutsch
 
Français
  Polski Nederlands     
 
 
 
 
 
 
 
 
 
               
 
 
Figure 3.Connecting the monitor to the power source 
 
 
 
WALL MOUNTING 
 
The iiyama monitor is shipped with the standard desktop configuration. However, you can 
optionally mount the device on a wall or on a monitor swivel arm (optional accessory). 
Please follow the...

4 
STARTUP 
 
1.      First start your PC and then turn on your monitor using the power switch (① in fig. 4). 
The status indicator ( ①  in fig. 4) should light up green.
 
 
2.      Adjust the image to meet your requirements (see the following sections  “Basic 
Setup ” and  “Image settings using the OSD menu ”). 
 
3.      If there is no image displayed  on the monitor, consult the section 
“Troubleshooting”. 
 
 
 
 
BASIC SETUP 
 
・ Automatic Image Adjustment You can adjust the image settings (such...