Iiyama Prolite H511s User Manual

ENGLISH
FEATURES

ENGLISH
Optional parts as below are available for your LCD monitor. Please contact your local iiyama dealer
or regional iiyama office for more details. The Protection Sheet may be attached to the LCD panel
surface to protect it from stains or scratches.

ENGLISHAPower Switch / Power Indicator (POWER)
Green:Normal operation (ProLite H511S)
Blue:Normal operation (ProLite H511S-B)
Orange:Power Management
The monitor enters into power management mode which reduces the power
consumption to less than 5W when receiving no horizontal and/or vertical
sync signal.
BAuto Button (AUTO)
       See page 13 for Auto Set-up.
CExit / Volume Button (EXIT /      )
D+ / Brightness Button ( + /     )
E– / Contrast Button ( – /     )
FMenu Button (MENU)
GInput Button (INPUT)...

ENGLISH
Power Cable
(Accessory)
Audio Cable (Accessory)
Computer D-Sub Signal Cable
(Accessory)
DVI-D Signal Cable
CONNECTING YOUR MONITOR
[Example of Connection] AEnsure that both the computer and the monitor are switched off.
BConnect the computer to the monitor with the signal cable. (See page 27 for CONNECTOR PIN
ASSIGNMENT.)
CConnect the monitor to the audio equipment with the Audio Cable when using the audio features.
DConnect the Power Cable to the monitor first and then to the power supply.
NOTE

ENGLISH
   BEFORE YOU OPERATE THE MONITOR      9
COMPUTER SETTING

ENGLISH
ADJUSTING THE HEIGHT AND THE VIEWING ANGLE

ENGLISH
OPERATING THE MONITOR
To create the best picture, your iiyama LCD monitor has been preset at the factory with the COMPLIANT
TIMING shown on page 26. You are also able to adjust the picture by following the button operation
shown below. For more detailed adjustments, see page 19 for SCREEN ADJUSTMENTS.
( (( (
(Press the Menu Button to start the On Screen Display feature. There are
additional Menu pages which can be switched by using the +/– Buttons.
B BB B
BSelect the Menu page which contains the...

ENGLISH
12       OPERATING THE MONITOR
ADJUSTMENT MENU CONTENTS
Adjustment Item Problem / Option                       Button to Press
Too dark
Too brightBrightness *1
ContrastToo dull
Too intense
To correct flickering text or linesClock *2
Phase *2
H-PositionToo far to the left
Too far to the right
V-PositionToo low
Too high
Return to MenuHighlight “Menu : 1” again.
You can skip the Menu pages and display an adjustment scale directly by using the
following button operations.
zBrightness:Press the...

ENGLISH
Menu : 2
(Analog)
On
Problem / Option                                                  Button to Press Adjustment Item
Color Temp.
Bluish white
Sharpness1 2 3 4 5
Adjust the picture quality at resolutions of less than 1600× 1200.
You can change the picture quality from 1 to 5 (sharp to soft).
Press the + Button to change the picture quality in numerical
order. Press the – Button to change the picture quality in reverse
numerical order.
Auto Set-up *3NO
YESReturn to Menu.
Adjust Clock, Phase,...

ENGLISH
14      OPERATING THE MONITOR
Menu : 2
(Analog)
Return to MenuHighlight “Menu : 2” again.
Off
Mode1High contrast
Dark
Gamma
Mode1Brightness of back-light is reduced.
Mode2Brightness of back-light is reduced more than Mode1.
Economy ModeOffNormal
Mode2
Direct
Problem / Option Adjustment Item
z  Economy Mode: When OSD menu is off, holding the Menu button for 1-2 seconds will toggle the
Economy Mode switch Off, Mode1 and Mode2.
NOTE