Iiyama Prolite E2607wsv User Manual

ENGLISH

 Ensure that both the computer and the monitor are switched off.
 Connect the computer to the monitor with the signal cable.
 Connect  the  monitor  to  the  audio  equipment  with  the Audio  Cable  for  computer  when  using  the 
audio features.
 Connect the Power Cable to the	monitor 	 first 	 and 	 then 	 to 	 the 	 power 	 supply.
NOTE  The  signal  cables  used  for  connecting  the  computer  and  monitor  may  vary  with  the  type  of 
computer used. An incorrect connection may...

ENGLISH

 Signal Timing
  Change to the desired signal timing listed on page 22: COMPLIANT TIMING.
 Windows 95/98/2000/Me/X P/Vista Plug �� PlayP/Vista Plug ��  Play
 The iiyama LCD monitor complies with DDC1/2B of VESA standard. The Plug  ��  Play function runs 
on Windows 95/98/2000/Me/XP/Vista by connecting the monitor to DDC1/2B compliant computernnecting the monitor to DDC1/2B compliant computer 
with the Signal Cable supplied. 
 For installation on Windows 95/98/2000/Me/XP/Vista: The monitor...

ENGLISH

     OPERATING THE MONITOR        9
ADJUSTING
OPERATING THE MONITOR
To create the best picture, your iiyama LCD monitor has been preset at the factory with the COMPLIANT 
TIMING shown on page 21. You are also able to adjust the picture by following the button operation 
shown below. For more detailed adjustments, see page 14 for SCREEN ADJUSTMENTS.
 Press the Menu Button to start the On Screen Display feature. There are additional 
Menu items which can be switched by using the / Buttons.  
...

10      OPERATING THE MONITOR     

ENGLISH

ADJUSTMENT MENU CONTENTS

Adjustment Item
Problem / Option                       Button to Press

Auto Image  Adjust
Auto Image Adjust *
Only Analog input
A d j u s t  
H .   /   V.   P o s i t i o n ,   H . S i z e   a n d   F i n e   T u n e
 
automatically.

* 
 
For best results, use the Auto Adjust in conjunction with the adjustment pattern. See page 14 for 

SCREEN ADJUSTMENTS.

NOTE
The
	
screen
	
becomes
	
dark
	
for
	
approximately
	
five
	
seconds...

ENGLISH

     OPERATING THE MONITOR     11     
Adjustment ItemProblem / Option                       Button to Press
Color Adjust
Cool
NormalReddish white (6500K)
Bluish white (9300K)
WarmGreenish white (5400K)
Green
Red
Blue
Too weak
Too strongUser Color
Adjustment ItemProblem / Option                       Button to Press
Audio Adjust
VolumeToo soft
Too loud
Mute
Mute off and on are switched as follows by pressing the Select Button successiv\
ely.
           Mute off      Mute on  NOTE
Return the...

ENGLISH

12       OPERATING THE MONITOR      

Adjustment Item
Problem / Option                       Button to Press

Manual Image Adjust

Horizontal Size

Fine Tune

H./V. Position

Too far to the left

Too far to the right

Too low

Too high

H. Position

V. Position

H.  Position  and  V.  Position  are  switched  as  follows  by  pressing  the

/

Button 

successively.

           H. Position      V. Position
 

NOTE

Too narrow

Too wide

To
	correct
	flickering
	text
	or
	lines

Sharpness...

ENGLISH

Adjustment ItemProblem / Option                       Button to Press
Setup Menu
Language Select
OSD Time Out
OSD Position
English
Deutsch
English
German
FrançaisFrench
Spanish
H.PositionOSD is too far to the left
OSD is too far to the right
OSD is too low
OSD is too highV.Position
You can set the OSD display duration time between 5 and 60 seconds.
ItalianoItalian
Espanol
Adjustment ItemProblem / Option                       Button to Press
Memory Recall
Memory RecallFactory-preset data is...

ENGLISH

SCREEN ADJUSTMENTS
 The screen adjustments described in this manual are designed to set image position and minimize 
flicker 	 or 	 blur 	 for 	 the 	 particular 	 computer 	 in 	 use. 	
 The  monitor  is  designed  to  provide  the  best  performance  at  resolution  of  1920  ×  1200,  but  can  not 
provide the best at resolutions of less than 1920 × 1200 because the picture is automatically stretched 
to 	 fit 	 the 	 full 	 screen. It is recommended to operate at resolution of 1920 ×...

ENGLISH

1
 1) Adjust the H.Position so that the left side of the picture frame will move to the left edge 
of the display area.
NOTE  	 When the left side of the picture frame moves apart from the left edge of the display 
area during the H.Size adjustment, adjust steps 1) and 2).
 	 	 Another way to make the H.Size adjustment is to correct the vertical wavy lines in the 
zebra pattern.
 	 		The 	 picture 	 may 	 flicker 	 during 	 the 	 H.Size, 	 H.Position 	 and 	 V.Position 	 adjustment.
 	 	...

ENGLISH

NOTE 		In	 case 	 the 	 strong 	 flicker 	 or 	 blurs 	 remain 	 on 	 a 	 part 	 of 	 the 	 screen, 	 repeat 	 steps 	 and 
		because 	 the 	 H.Size 	 may 	 not 	 be 	 adjusted 	 correctly. 	 If 	 the 	 flicker 	 or 	 blurs 	 still 	 remain, 	
set the refresh rate of computer to low (60Hz) and repeat steps from  again.
 	 	 Adjust the H.Position after the Fine Tune adjustment if the horizontal position moves 
during the adjustment.
  Adjust the Brightness and Color Adjust to get the...