Iiyama Prolite E2472hdd 1 User Manual

							ENGLISH

						

							ENGLISH
9     OPERATING THE MONITOR
OPERATING THE MONITOR
To create the best picture, your iiyama LCD monitor has been preset at the factory with the COMPLIANT 
TIMING shown on page 23. You are also able to adjust the picture by following the button operation 
shown below. For more detailed adjustments, see page 15 for SCREEN ADJUSTMENTS.
  Press the ENTER Button to start the On Screen Display feature. There are 
additional Menu items which can be switched by using the     /     Buttons.  
  Select the Menu item which contains the adjustment icon relating to the 
adjustment you want to make. Press the ENTER Button. Then, use the      /          
Buttons to highlight the desired adjustment icon. 
  Press the ENTER Button again. Use the    /    Buttons to make the appropriate 
adjustment or setting. 
Adjustments for H. / V. Position, Pixel Clock and Phase are saved for each signal timing. Except for 
these adjustments, all other adjustments have only one setting which applies to all signal timings.
When button operations are aborted during adjustment, On-Screen Display disappears when the 
time set for the OSD Time has passed. Also, press the EXIT button to quickly turn off the On-Screen 
Display.  
						

							ENGLISH
ADJUSTMENT MENU CONTENTS
OPERATING THE MONITOR     10
Adjustment Item Problem / Option                       Button to Press
Auto Adjust
Auto Adjust  *
You can skip the Menu items and display an adjustment scale directly by using the following button 
operations.
z Auto Adjust: Press the Auto Button when the Menu is not displayed.Direct
Direct
Adjust H. / V. Position, Pixel Clock and Phase 
automatically.
*   For best results, use the Auto Adjust in conjunction with the adjustment pattern. See page 15 for 
SCREEN ADJUSTMENTS.
Adjustment Item Problem / Option                       Button to Press
Luminance *1
DirectToo dark 
Too bright Brightness *2
ContrastToo dull
Too intense
*
1  Luminance adjustment disabled when ACR mode is active.
*
2  Adjust the Brightness when you are using the monitor in a dark room and feel the screen is too 
bright.
You can skip the Menu items and display an adjustment scale directly by using the following button 
operations.
z Brightness:  Press the     Button when the Menu is not displayed.
Direct
Only Analog  Input
 
						

							ENGLISH
11     OPERATING THE MONITOR
Adjustment Item Problem / Option                       Button to Press
Geometry
Phase Pixel Clock
Too left
Too right
Too low
Too highH. Position
V. Position
Too narrow
Too wide
To correct fl ickering text or lines
Only Analog  Input
Adjustment Item Problem / Option                       Button to Press
Color
9300K
7500K Yellowish whiteBluish white
Green Red
BlueToo weak
Too strong User Preset
6500K Reddish white
OSD Time
H.PositionOSD is too left
OSD is too right
OSD is too low
OSD is too high
You can set the OSD display duration time 
between 5 and 30 seconds.
Adjustment Item Problem / Option                       Button to Press
OSD
V.Position
 
						

							ENGLISH
OPERATING THE MONITOR     12
Adjustment Item Problem / Option                       Button to Press
Language
Language
English
DeutschEnglish
German Français French
Japanese
Polski PolishDutch 
Adjustment Item Problem / Option                       Button to Press
Recall
Recall AllFactory-preset data is restored.
NoReturn to Menu. Italiano Italian
Russian
Simplifi ed Chinese 
Español Spanish
Nederlands
Ye s
 
						

							ENGLISH
13     OPERATING THE MONITOR
Adjustment Item Problem / Option                       Button to Press
Miscellaneous
Sharpness1 2 3 4 5
You can change the picture quality from 1 to 5 (sharp to soft).
Press the    Button to change the picture quality in numerical 
order. Press the     Button to change the picture quality in reverse 
numerical order.
DDC/CI DDC/CI is turned ON.
On
Off
DDC/CI is turned OFF.
See your graphic card user guide for more information 
about changing the resolution and refresh.  NOTE
Displays information regarding the current input signal coming 
from the graphic card in your computer.
Display Information
DDC/CI On and Off are switched as follows by pressing the      Button successively.
            On       Off NOTE
Miscellaneous
Display Information
1920x1080  @ 60 Hz
ACRIncreased Contrast RatioOn
Off
Typical Contrast Ratio
Display ModeExpansion display Full
Aspect
Expansion display of Aspect
OD
Increased Response time
On
OffTypical Response time
iiyama Logo displayed when the monitor is turned on. 
On
Offiiyama Logo does not display when the monitor is 
turned on. 
Opening Logo
 
						

							ENGLISH
OPERATING THE MONITOR     14
Adjustment Item Problem / Option                       Button to Press
Audio*
VolumeToo soft
Too loud
Mute
Return the sound volume to the previous level. Turn off the sound temporarily.    Off On
Mute On and Off are switched as follows by pressing the     Button successively.
             On       Off NOTE
						

							ENGLISH
SCREEN ADJUSTMENTS

						

							ENGLISH
OPERATING THE MONITOR     16
  1) Adjust the H.Position so that the left side of the picture frame will move to the left edge of 
the display area.
NOTE  
						

							ENGLISH
NOTE