Iiyama Prolite E2407hdsd 1 User Manual
Have a look at the manual Iiyama Prolite E2407hdsd 1 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 49 iiyama manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
ENGLISH Even when using the power management mode, the monitor consumes electricity. Turn off the Power Switch whenever the monitor is not in use, during the night and weekends, to avoid unnecessary power consumption. NOTE It is possible that the video signal from the computer may be on while the H or V sync signal is missing. In this instance, the POWER MANAGEMENT feature may not work properly. POWER MANAGEMENT FEATURE Power Management Mode When the H-sync signal / V-sync signal / H and V sync signals from the computer are off, the monitor enters into Power Management Mode which reduces the power consumption to less than 1W . The screen becomes dark, and the power indicator turns to orange. From Power Management Mode, the image reappears in several seconds when either the keyboard or the mouse\ are touched again. The power management feature of this product complies with power saving requirement of E NERGY S TAR® and VESA DPMS. When activated, it automatically reduces unnecessary power consumption of the monitor when your computer is not in use. To use the feature, the monitor needs to be connected to a VESA DPMS compliant computer. There is a power management step the monitor takes as described below. The power management function, including any timer settings is configured by the operating system. Check your operating system manual for information on how this can be configured. OPERATING THE MONITOR 17 0 1W 10\ 0% Power Indicator Blue Orange
ENGLISH 18 TROUBLE SHOOTING TROUBLE SHOOTING Perform the adjustments described in OPERATING THE MONITOR, depending on the problem you have. If the monitor does not get a picture, skip to 2. 2. Consult the following items if you cannot find an appropriate adjustment item in OPERATING THE MONITOR or if the problem persists. If you are experiencing a problem which is not described below or you cannot correct the problem, discontinue using the monitor and contact your dealer or iiyama service center for further assistance. 3. Problem Check The picture does not appear. ( P o w e r i n d i c a t o r does not light up.) The Power Cable is firmly seated in the socket. The AC socket is live. Please check with another piece of equipment. If the blank screen saver is in active mode, touch the keyboard or the mouse. Increase the Contrast and/or Brightness. The computer is ON. The Signal Cable is properly connected. The Power Switch is turned ON. The signal timing of the computer is within the specification of the monitor. (Power indicator is orange.) If the monitor is in power management mode, touch the keyboard or the mouse. The screen is not synchronized. The Signal Cable is properly connected. The signal timing of the computer is within the specification of the monitor. The signal timing of the computer is within the specification of the monitor. The video output level of the computer is within the specification of the monitor. The screen position is not in the center. The signal timing of the computer is within the specification of the monitor. The screen is too bright or too dark. The screen is shaking. The video output level of the computer is within the specification of the monitor. The power voltage is within the specification of the monitor. The signal timing of the computer is within the specification of the monitor. The computer is ON. The Signal Cable is properly connected. 1. If the monitor fails to operate correctly, please follow the steps below for a possible solution. (Power indicator is blue.)
ENGLISH ProblemCheck No sound. The Audio Cable is properly connected. The audio output level of the audio equipment is within the specification of the monitor. The audio equipment (computer etc.) is ON. The Volume is turned up. The Mute is OFF. The sound is too loud or too quiet. The audio output level of the audio equipment is within the specification of the monitor. A strange noise is heard. The Audio Cable is properly connected. TROUBLESHOOTING 19 RECYCLING INFORMATION For better environment protection please don’t dispose your monitor. Please visit our web site: www.iiyama.com/recycle for monitor recycling.
ENGLISH 20 APPENDIX SPECIFICATIONS:ProLite E2407HDS-B1 APPENDIX LCD Panel Size/ Category Diagonal: 60cm / 24.0" 0.2715 mm H × 0.2715mm V Response time Pixel pitch 2ms (OD, Gray to Gray) Display Colors Approx.16.7M Sync Frequency Horizontal: 31.0-80.0kHz, Vertical: 56-75 Hz Maximum Resolution 1920 × 1080 Input Connector D-Sub mini 15 pin,DVI-24 pin,HDMI Input Sync Signal Separate sync: TTL, Positive or Negative Plug & Play VESA DDC1/2B TM 46W (Typ), Power management mode: 1W maximum* Power Consumption Dimensions / Net Weight 560.0 ×395.5 × 220.0 mm / 22.0 ×15.5 × 8.6 (W×H×D), 5.0kg / 11.0lbs 20 degrees (Up: 0-20 degrees) Viewable angle Right / Left : 85 degrees each, Up:80 degrees, Down: 80 degrees (Typical) Maximum Screen Size 521.3mm W × 293.2mm H / 20.51" W × 11.54" H Power Source 100-240VAC, 50/60Hz, 1.8A Environmental Considerations Approvals Tilt Angle * Condition: Audio equipment is not connected. NOTEBrightness Contrast ratio 300cd/m 2 (Typical) 1000 : 1 (Typical), ACR function available Analog: 0.7Vp-p (Standard), 75 Ω, Positive Digital (DVI): Digital Visual Interface standard Rev. 1.0 compliance Digital (HDMI): HDMI (1.3) Input Video Signal Input Audio Signal 1Vrms maximum Speakers 3W × 2 (Stereo speakers) Input Audio Connector ø 3.5mm mini jack (Stereo) Operating: Temperature Humidity Storage: -20 to 60°C / -4 to 140°F Humidity 5 to 35°C / 41 to 95°F 10 to 70% (No condensation) 10 to 80% (No condensation) Temperature CE,TUV/Baurt,Energy star
ENGLISH SPECIFICATIONS:ProLite E2407HDS-B2 APPENDIX LCD Panel Size/ Category Diagonal: 60cm / 24.0" 0.2715 mm H × 0.2715mm V Response time Pixel pitch 2ms (OD, Gray to Gray) Display Colors Approx.16.7M Sync Frequency Horizontal: 31.0-80.0kHz, Vertical: 56-75 Hz Maximum Resolution 1920 × 1080 Input Connector D-Sub mini 15 pin,DVI-24 pin Input Sync Signal Separate sync: TTL, Positive or Negative Plug & Play VESA DDC1/2B TM 46W (Typ), Power management mode: 1W maximum* Power Consumption Dimensions / Net Weight 560.0 × 395.5 × 220.0 mm / 22.0 ×15.5 × 8.6 (W×H×D), 5.0kg / 11.0lbs 20 degrees (Up: 0-20 degrees) Viewable angle Right / Left : 85 degrees each, Up:80 degrees, Down: 80 degrees (Typical) Maximum Screen Size 521.3mm W × 293.2mm H / 20.51" W × 11.54" H Power Source 100-240VAC, 50/60Hz, 1.8A Environmental Considerations Approvals Tilt Angle * Condition: Audio equipment is not connected. NOTEBrightness Contrast ratio 300cd/m 2 (Typical) 1000 : 1 (Typical), DCR function available Analog: 0.7Vp-p (Standard), 75 Ω, Positive Digital (DVI): Digital Visual Interface standard Rev. 1.0 compliance Input Video Signal Input Audio Signal 1Vrms maximum Speakers 3W × 2 (Stereo speakers) Input Audio Connector ø 3.5mm mini jack (Stereo) Operating: Temperature Humidity Storage: -20 to 60°C / -4 to 140°F Humidity 5 to 35°C / 41 to 95°F 10 to 70% (No condensation) 10 to 80% (No condensation) Temperature CE,TUV/Baurt,Energy star APPENDIX 21
ENGLISH 31.469kHz 37.500kHz 37.879kHz 48.077kHz 46.875kHz 48.363kHz 56.476kHz 60.023kHz 63.981kHz 79.976kHz 55.935kHz 70.635kHz 75.000kHz 65.290kHz 67.500kHz 31.469kHz DIMENSIONS COMPLIANT TIMING DIMENSIONS 1440 ×90059.940Hz 75.000Hz 60.317Hz 72.188Hz 75.000Hz 60.004Hz 70.069Hz 75.029Hz 60.020Hz 75.025Hz 59.887Hz 74.984Hz 60.000Hz 60.000Hz 60.000 Hz 70.087Hz VESA SVGA VGA XGA 1024 × 768640 × 480 800 × 600 Video Mode Vertical Frequency Dot Clock Horizontal Frequency 25.175MHz 31.500MHz 40.000MHz 50.000MHz 49.500MHz 65.000MHz 75.000MHz 78.750MHz 108.000MHz 135.000MHz 106.500MHz 136.750MHz 162.000MHz 146.250MHz 148.500MHz 28.322MHz* SXGA 1280 × 1024 1680 ×1050 WXGA+ WSXGA+ VGA TEXT 720 × 400 1920 ×1080 Full HD 1600 ×1200 UXGA NOTE * DVI, HDMI Input is not compliant. Video input 480P/720P/1080i/1080P PC Input 22 APPENDIX