Iiyama Prolite E2407hds 1 User Manual

ENGLISH

  Ensure that both the computer and the monitor are switched off.
   Connect the computer to the monitor with the signal cable.

  Connect  the  monitor  to  the  audio  equipment  with  the Audio  Cable  for  computer  when  using  the 
audio features.

  Connect the Power Cable to the 	 monitor 	 first 	 and 	 then 	 to 	 the 	 power 	 supply.
NOTE
     The  signal  cables  used  for  connecting  the  computer  and  monitor  may  vary  with  the  type  of 
computer used. An incorrect...

ENGLISH

  Signal Timing
 
Change to the desired signal timing listed on page 22: COMPLIANT TIMING.

  Windows 95/98/2000/Me/XP/Vista Plug & Play
 
The iiyama LCD monitor complies with DDC1/2B of VESA standard. The Plug & Play function runs 
on Windows 95/98/2000/Me/XP/Vista by connecting the monitor to DDC1/2B compliant computer 
with the Signal Cable supplied. 
 
For installation on Windows 95/98/2000/Me/XP/Vista: The monitor Information File for iiyama monitors 
may be necessary for your computer...

ENGLISH

     OPERATING THE MONITOR        9
ADJUSTING
OPERATING THE MONITOR
To create the best picture, your iiyama LCD monitor has been preset at the factory with the COMPLIANT 
TIMING shown on page 22. You are also able to adjust the picture by following the button operation 
shown below. For more detailed adjustments, see page 14 for SCREEN ADJUSTMENTS.
 Press the Menu Button to start the On Screen Display feature. There are additional 
Menu items which can be switched by using the / Buttons.  
...

ENGLISH

10      OPERATING THE MONITOR     
ADJUSTMENT MENU CONTENTS

Adjustment ItemProblem / Option                       Button to Press

Auto Image  Adjust
Auto Image Adjust *
Only Analog input Adjust 
H.  /  V.  Position,  H.Size  and  Fine  Tune  
automatically.
* 
  For best results, use the Auto Adjust in conjunction with the adjustment pattern. See page 14 for 
SCREEN ADJUSTMENTS.

NOTE The 	 screen 	 becomes 	 dark 	 for 	 approximately 	 five 	 seconds 	 during 	 the 	 adjustment.

Adjustment...

ENGLISH

     OPERATING THE MONITOR     11     

Adjustment ItemProblem / Option                       Button to Press

Color Adjust

9300K
6500K
Reddish white Bluish white

5400KGreenish white

Green Red
BlueToo weak
Too strong
User Color

Adjustment Item
Problem / Option                       Button to Press

Audio Adjust
Volume Too soft
Too loud
Mute

Mute off and on are switched as follows by pressing the Select Button successiv\
ely.
            Mute off      Mute on  
NOTE

Return the sound volume...

ENGLISH

12       OPERATING THE MONITOR      

Adjustment ItemProblem / Option                       Button to Press

Manual Image Adjust
Horizontal Size*1

Fine Tune*1
H./V. Position*1
Too far to the left
Too far to the right
Too low
Too high
H. Position
V. Position

H.  Position  and  V.  Position  are  switched  as  follows  by  pressing  the/Button 
successively.
           H. Position      V. Position 

NOTE

Too narrow
Too wide
To	correct	flickering	text	or	lines

Sharpness
Adjust the picture...

ENGLISH

Adjustment ItemProblem / Option                       Button to Press

Setup Menu
Language Select

OSD Time Out
OSD Background

OSD Position

English
on
Deutsch
English
Return the background of OSD
German
Français
off French
The background of OSD is made transparent
Spanish

H.Position
OSD is too far to the left
OSD is too far to the right
OSD is too low
OSD is too high
V.Position
You can set the OSD display duration time between 5 
and 60 seconds.

Italiano
Italian
Espanol

Adjustment Item...

ENGLISH

SCREEN ADJUSTMENTS
  The screen adjustments described in this manual are designed to set image position and minimize 
flicker
	 or 	 blur 	 for 	 the 	 particular 	 computer 	 in 	 use. 	

  The  monitor  is  designed  to  provide  the  best  performance  at  resolution  of  1920  ×  1080,  but  can  not 
provide the best at resolutions of less than 1920 × 1080  because the picture is automatically stretched 
to
	 fit 	 the 	 full 	 screen. It is recommended to operate at resolution of 1920 ×...

ENGLISH

1
  1) Adjust the H.Position so that the left side of the picture frame will move to the left edge 
of the display area.
NOTE
  	   When the left side of the picture frame moves apart from the left edge of the display 
area during the H.Size adjustment, adjust steps 1) and 2).
  	 	   Another way to make the H.Size adjustment is to correct the vertical wavy lines in the 
zebra pattern.
  	 		The
	 picture 	 may 	 flicker 	 during 	 the 	 H.Size, 	 H.Position 	 and 	 V.Position...

ENGLISH

NOTE  		In 	 case 	 the 	 strong 	 flicker 	 or 	 blurs 	 remain 	 on 	 a 	 part 	 of 	 the 	 screen, 	 repeat 	 steps 	  and 
 		 because 	 the 	 H.Size 	 may 	 not 	 be 	 adjusted 	 correctly. 	 If 	 the 	 flicker 	 or 	 blurs 	 still 	 remain, 	
set the refresh rate of computer to low (60Hz) and repeat steps from   again.
  	 	   Adjust the H.Position after the Fine Tune adjustment if the horizontal position moves 
during the adjustment.

 
Adjust the Brightness and Color Adjust to get...