Iiyama Prolite E2273hds 1 User Manual

							  ENGLISH
USER MANUAL
Thank you very much for choosing the 
iiyama LCD monitor.
We recommend that you take a few 
minutes to read carefully through this 
brief but comprehensive manual before 
installing and switching on the monitor. 
Please keep this manual in a safe 
place for your future reference. 
						

							ENGLISH
Congratulations!
This display is designed for both you and the planet!
The display you have just purchased carries the TCO 
Certified label. This ensures that your display is designed, 
manufactured and tested according to some of the strictest 
quality and environmental requirements in the world. This 
makes for a high performance product, designed with the user 
in focus that also minimizes the impact on the climate and our 
natural environment.
TCO Certified is a third party verified program, where every product model is tested by an 
accredited impartial test laboratory. TCO Certifi ed represents one of the toughest certifi cations  for 
displays worldwide.
Some of the Usability features of the TCO Certifi ed for displays:
•  Visual ergonomics for good image quality is tested to ensure top performance and reduce sight 
and strain problems. Important parameters are luminance, contrast, resolution, black level, 
gamma curve, colour and luminance uniformity and colour rendering
•  Products are tested according to rigorous safety standards at impartial laboratories
•  Electric and magnetic fi elds emissions as low as normal household background levels
•  Low acoustic noise emissions (When applicable)
Some of the Environmental features of the TCO Certifi ed for displays:
•  The brand owner demonstrates corporate social responsibility and has a certifi ed  environmental 
management system (EMAS or ISO 14001)
•  Very low energy consumption both in on- and standby mode minimize climate impact
•  Restrictions on chlorinated and brominated fl ame retardants, plasticizers, plastics and heavy 
metals such as cadmium, mercury and lead (RoHS compliance)
•  Both product and product packaging is prepared for recycling
•  The brand owner offers take-back options 
The requirements can be downloaded from our web site. The requirements included in this label 
have been developed by TCO Development in co-operation with scientists, experts, users as 
well as manufacturers all over the world. Since the end of the 1980s TCO has been involved in 
infl uencing the development of IT equipment in a more user-friendly direction. Our labeling system 
started with displays in 1992 and is now requested by users and IT-manufacturers all over the 
world. About 50% of all displays worldwide are TCO certifi ed. 
For more information, please visit
www.tcodevelopment.com 
						

							ENGLISH
CE MARKING DECLARATION OF CONFORMITY
This LCD monitor complies with the requirements of the EC Directive 2004/108/EC “EMC 
Directive” , 2006/95/EC “Low Voltage Directive” and 2009/125/EC “ErP Directive”.
The electro-magnetic susceptibility has been chosen at a level that gives correct operation in 
residential areas, business and light industrial premises and small-scale enterprises, inside as 
well as outside of the buildings. All places of operation are characterised by their connection to 
the public low voltage power supply system.
IIYAMA CORPORATION: Breguetlaan 8, 1438BC Oude Meer The Netherlands
  We reserve the right to change specifi cations without notice.
  All trademarks used in this user manual are the property of their respective owners.
  As an ENERGY STAR
® Partner, iiyama has determined that this product meets the ENERGY STAR® guidelines 
for energy effi ciency.
We recommend recycling of used product. Please contact your dealer or iiyama 
service center. Recycle information is obtained via the Internet, using the address:  
http://www.iiyama.com
You can access the Web page of different countries from there. 
For displays with glossy bezels the user should consider the placement of the display as the bezel 
may cause disturbing refl ections from surrounding light and bright surfaces. 
						

							ENGLISH
TABLE OF CONTENTS
FOR YOUR SAFETY ..........................................................................1
SAFETY PRECAUTIONS ..............................................................1
SPECIAL NOTES ON LCD MONITORS .......................................3
CUSTOMER SERVICE .................................................................3
CLEANING ....................................................................................3
BEFORE YOU OPERATE THE MONITOR ........................................4
FEATURES ....................................................................................4
CHEKING THE CONTENTS OF THE PACKAGE .........................4
FITTING AND REMOVAL OF BASE .............................................5
CONTROLS AND  CONNECTORS ................................................6
CONNECTING YOUR MONITOR  ................................................7
COMPUTER SETTING .................................................................8
ADJUSTING THE VIEWING ANGLE ............................................9
OPERATING THE MONITOR ...........................................................10
ADJUSTMENT MENU CONTENTS ............................................ 11
SCREEN ADJUSTMENTS ..........................................................17
POWER MANAGEMENT FEATURE ...........................................20
TROUBLE SHOOTING ....................................................................21
RECYCLING INFORMATION ...........................................................22
APPENDIX  ......................................................................................23
SPECIFICATIONS .......................................................................23
DIMENSIONS ..............................................................................24
COMPLIANT TIMING ..................................................................24 
						

							ENGLISH 
						

							ENGLISH
   FOR YOUR SAFETY   1  
FOR YOUR SAFETY
WARNING
STOP OPERATING THE MONITOR IF YOU ARE AWARE OF ANY PROBLEMS
If you notice any abnormal phenomena such as smoke, strange sounds or fumes, unplug the monitor 
and contact your dealer or iiyama service center immediately. Further use may be dangerous and can 
cause fi re or electric shock.
NEVER REMOVE THE CABINET
High voltage circuits are inside the monitor. Removing the cabinet may expose you to the danger of fi re 
or electric shock.
DO NOT PUT ANY OBJECT INTO THE MONITOR
Do not put any solid objects or liquids such as water into the monitor. In case of an accident, unplug 
your monitor immediately and contact your dealer or iiyama service center. Using the monitor with any 
object inside may cause fi re, electric shock or damage.
INSTALL THE MONITOR ON A FLAT, STABLE SURFACE
The monitor may cause an injury if it falls or is dropped.
DO NOT USE THE MONITOR NEAR WATER
Do not use where water may be splashed or spilt onto the monitor as it may cause fi re or electric 
shock.
OPERATE UNDER THE SPECIFIED POWER SUPPLY
Be sure to operate the monitor only with the specifi ed power supply. Use of an incorrect voltage will 
cause malfunction and may cause fi re or electric shock.
PROTECT THE CABLES
Do not pull or bend the power cable and signal cable. Do not place the monitor or any other heavy 
objects on the cables. If damaged, the cables may cause fi re or electric shock.
ADVERSE WEATHER CONDITIONS
It is advisable not to operate the monitor during a heavy thunder storm as the continual breaks in 
power may cause malfunction. It is also advised not to touch the plug in these circumstances as it may 
cause electric shock.
SAFETY PRECAUTIONS 
						

							ENGLISH
2   FOR YOUR SAFETY 
CAUTION
INSTALLATION LOCATIONDo not install the monitor where sudden temperature changes may occur, or in humid, dusty or smoky 
areas as it may cause fi re, electric shock or damage. You should also avoid areas where the sun 
shines directly on the monitor.
DO NOT PLACE THE MONITOR IN A HAZARDOUS POSITIONThe monitor may topple and cause injury if not suitably located. Please also ensure that you do not 
place any heavy objects on the monitor, and that all cables are routed such that children may not pull 
the cables and possibly cause injury.
MAINTAIN GOOD VENTILATION
Ventilation slots are provided to keep the monitor from overheating. Covering the slots may cause fi re. 
To allow adequate air circulation, place the monitor at least 10 cm (or 4 inches) from any walls.
Do not remove the tilt stand when operating the monitor. Ventilation slots on the back of the cabinet 
will be blocked and the monitor may overheat if the stand is removed. This may cause fi re or damage. 
Operating the monitor on its back, side, upside down or on a carpet or any other soft material may also 
cause damage.
DISCONNECT THE CABLES WHEN YOU MOVE THE MONITOR
When you move the monitor, turn off the power switch, unplug the monitor and be sure the signal cable 
is disconnected. If you do not disconnect them, it may cause fi re or electric shock.
UNPLUG THE MONITOR
If the monitor is not in use for a long period of time it is recommended that it is left unplugged to avoid 
accidents. 
HOLD THE PLUG WHEN DISCONNECTING
To disconnect the power cable or signal cable, always pull it by the plug. Never pull on the cable itself 
as this may cause fi re or electric shock.
DO NOT TOUCH THE PLUG WITH WET HANDS
Pulling or inserting the plug with wet hands may cause electric shock.
WHEN YOU INSTALL THE MONITOR ON YOUR COMPUTER
Be sure the computer is strong enough to hold the weight of the monitor, otherwise, you may damage 
your computer.
DO NOT USE THE MONITOR FOR 24-HOURS CONTINUOUSLYThe monitor is not designed to work for 24-hours continuously, do not use the monitor for 24-hours 
continuously.
OTHERS
ERGONOMIC RECOMMENDATIONS
To eliminate eye fatigue, do not operate the monitor against a bright background or in a dark room. 
For optimal viewing comfort, the monitor should be just below eye level and 40-60 cm (16-24 inches) 
away from your eyes. When using the monitor over a prolonged time, a ten minute break every hour is 
recommended as looking at the screen continuously can cause eye strain. 
						

							ENGLISH
   FOR YOUR SAFETY   3  
The following symptoms are normal with LCD monitors and do not indicate a problem.
NOTEWhen you fi rst turn on the LCD monitor, the picture may not fi t in the display area because 
of the type of computer that is used. In this case, adjust the picture position to the correct 
position.
Due to the nature of the backlight, the screen may fl icker during initial use. Turn off the 
Power Switch and then turn it on again to make sure the fl icker disappears.
You may fi nd slightly uneven brightness on the screen depending on the desktop pattern 
you use.
Due to the nature of the LCD screen, an afterimage of the previous screen may remain 
after switching the image, when the same image is displayed for hours. In this case, the 
screen can be recovered slowly by changing the image or turning off the Power Switch for 
some hours.
Contact your dealer or iiyama service center for the backlight replacement when the 
screen is dark, fl ickering or not lighting up. Never attempt to replace it by yourself.
SPECIAL NOTES ON LCD MONITORS
If you have to return your unit for service and the original packaging has been discarded, 
please contact your dealer or iiyama service center for advice or replacement packaging.
WARNINGIf you drop any materials or liquids such as water into the monitor when cleaning, 
unplug the power cable immediately and contact your dealer or iiyama service center.
CAUTIONFor safety reasons, turn off the power switch and unplug the monitor before you clean 
it.
To protect the LCD panel, do not scratch or rub the screen with a hard object.
Never use any of the following strong solvents. These will damage the cabinet and 
the LCD screen.
Touching the cabinet with any product made from rubber or plastic for a long time 
may cause degeneration or loss of paint on the cabinet.Thinner
Benzine
Abrasive cleanerSpray-type cleaner
Wax
Acid or Alkaline solvent
CABINETStains can be removed with a cloth lightly moistened with a mild detergent solvent. Then 
wipe the cabinet with a soft dry cloth. 
LCD
SCREENPeriodic cleaning with a soft dry cloth is recommended.
Dont use tissue paper etc. because these will damage the LCD screen.
CUSTOMER SERVICE
CLEANING
NOTE
NOTE 
						

							ENGLISH
4  BEFORE YOU OPERATE THE MONITOR
The following accessories are included in your package. Check to see if they are enclosed with the 
monitor. If anything is missing or damaged, please contact your local  iiyama dealer or regional iiyama 
offi ce.
BEFORE YOU OPERATE THE MONITOR
CHEKING THE CONTENTS OF THE PACKAGE
FEATURES
  Supports Resolutions up to 1920 × 1080
  High Contrast 1000:1 (Typical), ACR Function Available / Brightness 250cd/m
2 
(Typical), Quick Response Time 2ms (Gray to Gray)  
  Digital Character Smoothing
 Automatic Set-up
 Stereo Speakers        
2 × 1.0W Stereo Speakers
Plug & Play VESA DDC2B Compliant           
Windows
® 95/98/2000/Me/XP/Vista/7 Compliant
  Power Management (ENERGY STAR
® VESA DPMS Compliant)
  Ergonomic Design TCO5.2
  VESA Mounting Standard (100mm×100mm) Compliant
  Keyhole for Security Lock
* The rating of  the Power Cable enclosed in 120V area is 10A/125V. If you are using 
a power supply higher than this rating, then a power cable with a rating of 10A/250V 
must be used. However, all guarantees and warranties are void for any  
problems or damage caused by a power cable not supplied by iiyama.
 
Power Cable*
D-Sub Signal Cable 
DVI-D Signal Cable
Audio Cable 
Stand-Base 
Cable Holder
 
Safety Guide 
Quick Start Guide
                                  
CAUTION