Iiyama Prolite E2202ws B1 User Manual

ENGLISH
Menu : 3
(Analog)
Japanese
Adjustment Item
Menu:3
1680 × 1050
H:65.4KHz  V:60.1Hz
DCROFF
Problem / Option                                             Button to Press
OSD Position1 2 3 4 5
You can move the OSD display area
to any one of the following 5 positions
within the overall display:
Italiano LanguageEnglish
DeutschEnglish
FrançaisEspañol
FrenchSpanish
Press the + Button to move the OSD in numerical order. Press
the – Button to move the OSD in reverse numerical order.
Too soft
Too loud...

ENGLISH
18     OPERATING THE MONITOR
User
Menu:1
1680 × 1050
H:65.4KHz  V:60.1Hz
DCROFF
GR
B
Adjustment Item Problem / Option                               Button to Press
Too dark
Too brightBrightness *1
ContrastToo dull
Too intense
*1Adjust the Brightness when you are using the monitor in a dark room and feel the screen is too
bright.
Direct
Direct
Sharpness
Normal
Mode1High contrast
Mode2DarkGamma
Color Temp.Color 1: 9300K
1
NOTE„sRGB is an international standard which defines and unifies the...

ENGLISH
Menu : 1
(Digital)
Return to MenuHighlight “Menu : 1” again.
Mode1Brightness of back-light is reduced.
Mode2Brightness of back-light is reduced more than Mode1.
Economy ModeOffNormal
Problem / Option Adjustment Item
NOTE„       is displayed while Economy Mode is active.
OPERATING THE MONITOR     19
 

ENGLISH
20     OPERATING THE MONITOR
Menu : 2
(Digital)
Japanese
Adjustment Item
Menu:2
1680 × 1050
H:65.4KHz  V:60.1Hz
DCROFF
Problem / Option                                             Button to Press
OSD Position1 2 3 4 5
You can move the OSD display area
to any one of the following 5 positions
within the overall display:
Italiano LanguageEnglish
DeutschEnglish
German
FrançaisEspañol
French
Press the + Button to move the OSD in numerical order. Press
the – Button to move the OSD in reverse numerical...

ENGLISH
SCREEN ADJUSTMENTS
„The screen adjustments described in this manual are designed to set image position and minimize
flicker or blur for the particular computer in use.
„The monitor is designed to provide the best performance at resolution of 1680 × 1050, but can not
provide the best at resolutions of less than 1680 × 1050 because the picture is automatically stretched
to fit the full screen. It is recommended to operate at resolution of 1680 × 1050 in normal use.
„Displayed text or lines will be...

ENGLISH
22     OPERATING THE MONITOR
+
–
F FF F
F1) Adjust the H-Position so that the left side of the picture frame will move to the left
edge of the display area.
NOTE„When the left side of the picture frame moves apart from the left edge of the display
area during the Clock adjustment, adjust steps 1) and 2).
„Another way to make the Clock adjustment is to correct the vertical wavy lines in the
zebra pattern.
„The picture may flicker during the Clock, H-Position and V-Position adjustment.
„In case the...

ENGLISH
NOTE„In case the strong flicker or blurs remain on a part of the screen, repeat steps 
F and
G  because the Clock may not be adjusted correctly. If the flicker or blurs still remain,
set the refresh rate of computer to low (60Hz) and repeat steps from 
C again.
„Adjust the H-Position after the Phase adjustment if the horizontal position moves
during the adjustment.
H HH H
HAdjust the Brightness and Color Temp. to get the desired picture after you complete
the Clock and Phase adjustments.
Put back...

ENGLISH
0  2W 100% POWER
CONSUMPTION
Blue
Orange
Power Indicator
NORMAL MODE
POWER MANAGEMENT MODE
Even when using the power management mode, the monitor consumes electricity. Turn
off the Power Switch whenever the monitor is not in use, during the night and weekends,
to avoid unnecessary power consumption.NOTE
„
It is possible that the video signal from the computer may be on while the H or V sync
signal is missing. In this instance, the POWER MANAGEMENT feature may not work
properly. „
POWER MANAGEMENT...

ENGLISH
TROUBLE SHOOTING
Perform the adjustments described in OPERATING THE MONITOR, depending on the problem you
have. If the monitor does not get a picture, skip to 2.
2. Consult the following items if you cannot find an appropriate adjustment item in OPERATING THE
MONITOR or if the problem persists.
If you are experiencing a problem which is not described below or you cannot correct the
problem, discontinue using the monitor and contact your dealer or iiyama service center for
further assistance. 3....

ENGLISH
Problem Check
No sound.*
†The Audio Cable is properly connected.
†The audio output level of the audio equipment is within the specification of
the monitor. F†The audio equipment (computer etc.) is ON.
†The Volume is turned up.
†The Mute is OFF.
The sound is too*
loud or too quiet. G†The audio output level of the audio equipment is within the specification of
the monitor.
A strange noise is*
heard. H†The Audio Cable is properly connected.
* Available for ProLite E2202WS / E2202WSV only.
26...