Iiyama Prolite E2201w User Manual

ENGLISH
CONTROLS AND CONNECTORS : ProLite E2201W
 
APower Switch (     )
BMenu Button (MENU)
C+ Button ( + )
D– Button ( – )
EAuto Button (AUTO)
FInput Button (SOURCE)
GPower Indicator
Blue:Normal operation
Orange:Power Management
„Auto (Signal Select)
When no signal is received from the system, the display enters into its
Power Management Mode reducing power consumption to < than 2W.
„Analog / Digital (Signal Select)
The monitor enters into power management mode which reduces the power
consumption to...

ENGLISH
8     BEFORE YOU OPERATE THE MONITOR
CONTROLS AND CONNECTORS : ProLite E2202WS / E2202WSV
APower Switch (     )
BMenu Button (MENU)
C+ Button (               )
D– Button (               )
EAuto Button (AUTO)
FInput Button (SOURCE)*
GPower Indicator
Blue:Normal operation
Orange:Power Management
„Auto (Signal Select)
When no signal is received from the system, the display enters into its
Power Management Mode reducing power consumption to < than 2W.
„Analog / Digital (Signal Select)
The monitor...

ENGLISH
Computer D-Sub Signal Cable
(Accessory)
DVI-D Signal Cable 
(Accessory) Power Cable
(Accessory)
CONNECTING YOUR MONITOR : ProLite E2201W
[Example of Connection] AEnsure that both the computer and the monitor are switched off.
BConnect the computer to the monitor with the signal cable. (See page 32 for CONNECTOR PIN
ASSIGNMENT.)
CConnect the Power Cable to the monitor first and then to the power supply.
NOTE„The signal cables used for connecting the computer and monitor may vary with the type of...

ENGLISH
10     BEFORE YOU OPERATE THE MONITOR
Audio Cable (Accessory)
Computer D-Sub Signal Cable
(Accessory)
DVI-D Signal Cable* Power Cable
(Accessory)
CONNECTING YOUR MONITOR : ProLite E2202WS / E2202WSV
[Example of Connection] AEnsure that both the computer and the monitor are switched off.
BConnect the computer to the monitor with the signal cable. (See page 32 for CONNECTOR PIN
ASSIGNMENT.)
CConnect the monitor to the audio equipment with the Audio Cable when using the audio features.
DConnect the...

ENGLISH
20
5
ADJUSTING THE VIEWING ANGLE
„For optimal viewing it is recommended to look at the full face
of the monitor.
„Hold the stand so that the monitor does not topple when you
change the monitor’s angle.
„You are able to adjust the monitor’s angle up to 20 degrees
upward, 5 degrees downward.
„In order to ensure a healthy and relaxed body position when
using the monitor at visual display workstations, it is
recommended that the adjusted tilt angle should not exceed
10 degrees. Adjust the monitor’s...

ENGLISH
12     OPERATING THE MONITOR
The bar shows 
the progress of the 
adjustment being made.+
–50
V-Position
Menu:1
1680 × 1050
H:65.4KHz  V:60.1Hz
DCROFF
OPERATING THE MONITOR
To create the best picture, your iiyama LCD monitor has been preset at the factory with the COMPLIANT
TIMING shown on page 31. You are also able to adjust the picture by following the button operation
shown below. For more detailed adjustments, see page 21 for SCREEN ADJUSTMENTS.
( (( (
(Press the Menu Button to start the On...

ENGLISH
ADJUSTMENT MENU CONTENTS
You can skip the Menu pages and display an adjustment scale directly by using the
following button operations.
zBrightness / Contrast / Volume*
1 / DCR: To display direct menu press either of the +/- Buttons.
Continue to use the +/- Buttons to select the adjustments
required.
z  DCR: Select on the Direct Menu.
Off: Typical Contrast Ratio
On: Increased Contrast Ratio
DCR adjusts brightness according to the image, and improve the contrast ratio
up to 2000:1 during move...

ENGLISH
14     OPERATING THE MONITOR
Menu:1
1680 × 1050
H:65.4KHz  V:60.1Hz
DCROFF
Adjustment Item Problem / Option                       Button to Press
Too dark
Too brightBrightness *1
ContrastToo dull
Too intense
To correct flickering text or linesClock *2
Phase *2
H-PositionToo far to the left
Too far to the right
V-PositionToo low
Too high
Return to MenuHighlight “Menu : 1” again.
To correct flickering text or lines
Direct
Direct
*1Adjust the Brightness when you are using the monitor in a dark room...

ENGLISH
Menu:2
1680 × 1050
H:65.4KHz  V:60.1Hz
DCROFFMenu : 2
(Analog)
On
Problem / Option                                                  Button to Press Adjustment Item
Color Temp.
Color 1: 9300K
Sharpness1 2 3 4 5
Adjust the picture quality at resolutions of less than 1680 ×
1050.
You can change the picture quality from 1 to 5 (sharp to soft).
Press the + Button to change the picture quality in numerical
order. Press the – Button to change the picture quality in reverse
numerical order. Auto Set-up...

ENGLISH
16     OPERATING THE MONITOR
Normal
Menu : 2
(Analog)
Return to MenuHighlight “Menu : 2” again.
Off
Mode1High contrast
Dark
Gamma
Mode1Brightness of back-light is reduced.
Mode2Brightness of back-light is reduced more than Mode1.
Economy ModeOffNormal
Mode2
Problem / Option Adjustment Item
NOTE„       is displayed while Economy Mode is active.