Iiyama Prolite E2003ws User Manual

ENGLISH
BEFORE YOU OPERATE THE MONITOR     7
CONNECTING YOUR MONITOR
[Example of Connection]
AEnsure that both the computer and the monitor are switched off.
B Connect the computer to the monitor with the signal cable.(See page 25 \
for CONNECTOR PIN
ASSIGNMENT.)
C Connect the monitor to the audio equipment with the Audio Cable for computer when using the
audio features.
D Connect the Power Cable to the monitor first and then to the power suppl\
y.
NOTE„
The signal cables used for connecting the...

ENGLISH
„Signal Timing
Change to the desired signal timing listed on page 24: COMPLIANT TIMING.
„ Windows 95/98/2000/Me/XP/Vista Plug & Play
The iiyama LCD monitor complies with DDC2B of VESA standard. The Plug & \
Play function runs on
Windows 95/98/2000/Me/XP/Vista by connecting the monitor to DDC2B compli\
ant computer with
the Signal Cable supplied.
For installation on Windows 95/98/2000/Me/XP: The monitor Information Fi\
le for iiyama monitors
may be necessary for your computer and obtained via the...

ENGLISH
OPERATING THE MONITOR     9
ADJUSTING
OPERATING THE MONITOR
To create the best picture, your iiyama LCD monitor has been preset at th\
e factory with the COMPLIANT
TIMING shown on page 24. You are also able to adjust the picture by following the button operation\
shown below. For more detailed adjustment s, see page 14 for SCREEN ADJUSTMENTS.
(
( (
(
(Press the ENTER Button to start the On Screen Display feature. There are\
additional Menu items which can be switched by using the     /...

ENGLISH
10     OPERATING THE MONITOR
ADJUSTMENT MENU CONTENTS
Adjustment Item Problem / Option                       Button to Press
Auto Adjust
Auto Adjust  *
You can skip the Menu items and display an adjustment scale directly by u\
sing the following
button operations.
z Auto Adjust: Press the Auto Button when the Menu is not displayed.Direct
Direct
Adjust H. / V. Position, Pixel Clock and Phase automatically.
* For best results, use the Auto Adjust in conjunction with the adjustment pattern. See...

ENGLISH
OPERATING THE MONITOR     11
Adjustment Item Problem / Option                       Button to Press
Geometry
Phase Pixel Clock
Too left
Too right
Too low
Too highH. Position
V. Position
Too narrow
Too wide
To correct flickering text or lines
Only Analog  Input
Adjustment Item Problem / Option                       Button to Press
Color
9300K
7500K Y ellowish white
Bluish white
Green Red
Blue
Too weak
Too strong
User Preset
6500K Reddish white
OSD Time
H.PositionOSD is too left
OSD is too right...

ENGLISH
Adjustment Item Problem / Option                       Button to Press
Language
Language
English
Deutsch English
German
Français French
Russian
Nederlands Dutch
Japanese
Adjustment Item Problem / Option                       Button to Press
Recall
Recall All Factory-preset data is restored.Ye s
No
Return to Menu.
Italiano Italian
Polski
Polish
Adjustment Item Problem / Option                       Button to Press
Miscellaneous
Sharpness 1 2 3 4 5
You can change the picture quality from 1 to 5...

ENGLISH
OPERATING THE MONITOR     13
Adjustment Item Problem / Option                       Button to Press
Audio
VolumeToo soft
Too loud
Mute
Return the sound volume to the previous level. Turn off the sound temporarily.Off On
Input Select
When only one of the two signal inputs is connected to the signal source\
, the one
connected is automatically selected. Input Select function is not availa\
ble if there is no
signal input from the selected connector or during the power management \
mode.NOTE
Select...

ENGLISH
14     OPERATING THE MONITOR
SCREEN ADJUSTMENTS
„The screen adjustments described in this manual are designed to set image position and minimize
flicker or blur for the particular computer in use.
„The monitor is designed to provide the best performance at resolution of 1680 × 1050, but can not
provide the best at resolutions of less than 1680 × 1050 because the picture is automatically stretched
to fit the full screen. It is recommended to operate at resolution of 1680 × 1050 in normal use....

ENGLISH
1
F FF F
F1) Adjust the H.Position so that the left side of the picture frame will move to the left
edge of the display area.
NOTE„When the left side of the picture frame moves apart from the left edge of the display
area during the Pixel Clock adjustment, adjust steps 1) and 2).
„Another way to make the Pixel Clock adjustment is to correct the vertical wavy lines
in the zebra pattern.
„The picture may flicker during the Pixel Clock, H.Position and V.Position adjustment.
„In case the picture...

ENGLISH
NOTE„In case the strong flicker or blurs remain on a part of the screen, repeat steps 
F and
G  because the Pixel Clock may not be adjusted correctly. If the flicker or blurs still
remain, set the refresh rate of computer to low (60Hz) and repeat steps from 
C
again.
„Adjust the H.Position after the Phase adjustment if the horizontal position moves
during the adjustment.
H HH H
HAdjust the Brightness and Color to get the desired picture after you complete the
Pixel Clock and Phase adjustments....