Iiyama Prolite E2001wsv User Manual

							
DEUTSCH
FRANCAIS
  ENGLISH
USER MANUAL
Thank you very much for choosing the
iiyama LCD monitor.
We recommend that you take a few
minutes to read carefully through this
brief but comprehensive manual before
installing and switching on the monitor.
Please keep this manual in a safe
place for your future reference.
NEDERLANDS
POLSKI
ITALIANO
PLE2001_3WS_WSV-e-M034B01.P65 2007/09/11, 10:12
1
 
						

							
ENGLISH
Congratulations!
The display you have just purchased carries the TCO’03 Displays
label. This means that your display is designed, manufactured
and tested according to some of the strictest quality and
environmental requirements in the world. This makes for a high
performance product, designed with the user in focus that also
minimizes the impact on our natural environment.
Some of the features of the TCO’03 Display requirements:
Ergonomics
• Good visual ergonomics and image quality in order to improve the working\
 environment for the user and to reduce sight and strain problems. Important parameters are l\
uminance, contrast,
resolution, reflectance, colour rendition and image stability.
Energy
• Energy-saving mode after a certain time – beneficial both for the use\
r and the environment
• Electrical safety
Emissions
• Electromagnetic fields
• Noise emissions
Ecology
• The product must be prepared for recycling and the manufacturer must hav\
e a certifiedenvironmental management system such as EMAS or ISO 14 001
• Restrictions on o chlorinated and brominated flame retardants and polymers
o heavy metals such as cadmium, mercury and lead.
The requirements included in this label have been developed by TCO Devel\
opment in cooperation
with scientists, experts, users as well as manufacturers all over the wo\
rld. Since the end of the
1980s TCO has been involved in influencing the development of IT equipme\
nt in a more user-
friendly direction. Our labelling system started with displays in 1992 a\
nd is now requested by users
and IT-manufacturers all over the world. For more information, please visitwww.tcodevelopment.com
PLE2001_3WS_WSV-e-M034B01.P65 2007/09/10, 18:19 2
 
						

							
ENGLISH
FCC DECLARATION OF CONFORMITY
Model Number:
Trade Name:iiyama
Responsible party: Ampronix Inc.
Address: 8697 Research Dr. Irvine, CA.92618 U.S.A.
Telephone number: 949-788-9930
This device complies with Part 15 of the FCC Rules. Operation is subject\
 to the following two conditions: (1)
This device may not cause harmful interference, and (2) this device mu\
st accept any interference received,
including interference that may cause undesired operation.
This device has been tested and found to comply with the limits for Clas\
s B Personal Computers and
peripherals, pursuant to Part 15 of the FCC Rules. These limits are desi\
gned to provide reasonable protection
against harmful interference when the device is operated in a residentia\
l environment. This device generates,
uses and can radiate radio frequency energy, and if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there i\
s no guarantee that interference
will not occur in a particular installation. If you determine the device\
 does cause harmful interference to radio
or television reception (this may be determined by monitoring the inter\
ference while turning the device off and
on), you are encouraged to try to correct the interference by one of th\
e following measures: „Reorient or relocate the receiving antenna.
„ Increase the separation between the device and receiver.
„ Connect the device into an outlet on a circuit different from that to wh\
ich the receiver
is connected.
„ Consult the dealer or an experienced radio or TV technician for help.
To meet the FCC requirements, you should use a signal cable with ferrite core at both ends.
CAUTIONChanges or modifications not expressly approved by IIYAMA could void the users authority
to operate the device under FCC compliance regulations.
CE MARKING DECLARATION OF CONFORMITY
This LCD monitor complies with the requirements of the EC Directive 89/3\
36/EEC “EMC Directive” and 73/23/
EEC “Low Voltage Directive” as amended by Directive 93/68/EEC.
The electro-magnetic susceptibility has been chosen at a level that give\
s correct operation in residential areas,
business and light industrial premises and small-scale enterprises, insi\
de as well as outside of the buildings.
All places of operation are characterised by their connection to the pub\
lic low voltage power supply system.
This digital apparatus does not exceed the Class B limits for radio nois\
e emissions from digital apparatus as
set out in the radio interference regulation of the Canadian department \
of communications.
CANADIAN DEPARTMENT OF COMMUNICATIONS  COMPLIANCE
STATEMENT
„ We reserve the right to change specifications without notice.
„ All trademarks used in this user manual are the property of their respec\
tive owners.
„ As an E
NERGY STA R® Partner, iiyama has determined that this product meets the ENERGY STA R® guidelines for
energy efficiency.
PL2000
PLE2001_3WS_WSV-e-M034B01.P65 2007/09/10, 18:19 3
 
						

							
ENGLISH
FOR YOUR SAFETY........................................................................\
...... 1
SAFETY PRECAUTIONS ................................................................. 1
SPECIAL NOTES ON LCD MONITORS ............................................. 3
CUSTOMER SERVICE ...................................................................... 3
CLEANING ........................................................................\
............... 3
BEFORE YOU OPERATE THE MONITOR ................................................ 4
FEATURES ........................................................................\
............... 4
CHECKING THE CONTENTS OF THE PACKAGE ............................. 4
HOW TO USE THE STAND .............................................................. 5
CONTROLS AND  CONNECTORS .................................................... 6
CONNECTING YOUR MONITOR ...................................................... 7
COMPUTER SETTING ....................................................................... 8
ADJUSTING THE VIEWING ANGLE ................................................. 8
OPERATING THE MONITOR ................................................................... 9
ADJUSTMENT MENU CONTENTS .................................................... 10
SCREEN ADJUSTMENTS ................................................................. 14
POWER MANAGEMENT FEATURE .................................................. 17
TROUBLE SHOOTING ........................................................................\
.... 18
RECYCLING INFORMATION ................................................................... 19
APPENDIX ........................................................................\
...................... 20
SPECIFICATIONS ........................................................................\
..... 20
DIMENSIONS ........................................................................\
............ 24
COMPLIANT TIMING ........................................................................\
. 24
CONNECTOR PIN ASSIGNMENT ...................................................... 25
TABLE OF CONTENTS
We recommend recycling of used product. Please contact your dealer or ii\
yama service
center. Recycle information is obtained via the Internet, using the address:
http://www.iiyama.com
You can access the Web page of different countries from there.
Regulatory information : The high efficiency LCD backlights used in this\
product contains 5mg or less of Mercury, the disposal of which may be
regulated due to environmental considerations.
For disposal or recycling information, please contact your local authori\
ties or
the Electronic Industries Alliance (www.eiae.org).
This information is only for U.S.A..
PLE2001_3WS_WSV-e-M034B01.P65 2007/10/02, 13:05 4
 
						

							
ENGLISH
FOR YOUR SAFETY     1
FOR YOUR SAFETY
WARNING
STOP OPERATING THE MONITOR WHEN YOU SENSE TROUBLE
If you notice any abnormal phenomena such as smoke, strange sounds or fu\
mes, unplug the monitor
and contact your dealer or iiyama service center immediately. Further use may be dangerous and
can cause fire or electric shock.
NEVER REMOVE THE CABINET
High voltage circuits are inside the monitor. Removing the cabinet may expose you to the danger of
fire or electric shock.
DO NOT PUT ANY OBJECT INTO THE MONITOR
Do not put any solid objects or liquids such as water into the monitor. In case of an accident, unplug
your monitor immediately and contact your dealer or iiyama service center. Using the monitor with
any object inside may cause fire, electric shock or damage.
INSTALL THE MONITOR ON A FLAT, STABLE SURFACE
The monitor may cause an injury if it falls or is dropped.
DO NOT USE THE MONITOR NEAR WATER
Do not use where water may be splashed or spilt onto the monitor as it m\
ay cause fire or electric
shock.
OPERATE UNDER THE SPECIFIED POWER SUPPLY
Be sure to operate the monitor only with the specified power supply. Use of an incorrect voltage will
cause malfunction and may cause fire or electric shock.
PROTECT THE CABLES
Do not pull or bend the power cable and signal cable. Do not place the m\
onitor or any other heavy
objects on the cables. If damaged, the cables may cause fire or electric\
 shock.
ADVERSE WEATHER CONDITIONS
It is advisable not to operate the monitor during a heavy thunder storm \
as the continual breaks in
power may cause malfunction. It is also advised not to touch the plug in\
 these circumstances as it
may cause electric shock.
SAFETY PRECAUTIONS
PLE2001_3WS_WSV-e-M034B01.P65 2007/09/10, 18:195
 
						

							
ENGLISH
CAUTION
INSTALLATION LOCATION
Do not install the monitor where sudden temperature changes may occur, or in humid, dusty or smoky
areas as it may cause fire, electric shock or damage. You should also avoid areas where the sun
shines directly on the monitor.
DO NOT PLACE THE MONITOR IN A HAZARDOUS POSITION
The monitor may topple and cause injury if not suitably located. Please \
also ensure that you do not
place any heavy objects on the monitor, and that all cables are routed such that children may not pull
the cables and possibly cause injury.
MAINTAIN GOOD VENTILATION
Ventilation slots are provided to keep the monitor from overheating. Covering the slots may cause
fire. To allow adequate air circulation, place the monitor at least 10 cm (or \
4 inches) from any walls.
Do not remove the tilt stand when operating the monitor. Ventilation slots on the back of the cabinet
will be blocked and the monitor may overheat if the stand is removed. Th\
is may cause fire or damage.
Operating the monitor on its back, side, upside down or on a carpet or a\
ny other soft material may
also cause damage.
DISCONNECT THE CABLES WHEN YOU MOVE THE MONITOR
When you move the monitor, turn off the power switch, unplug the monitor and be sure the signal
cable is disconnected. If you do not disconnect them, it may cause fire \
or electric shock.
UNPLUG THE MONITOR
If the monitor is not in use for a long period of time it is recommended\
 that it is left unplugged to avoid
accidents.
HOLD THE PLUG WHEN DISCONNECTING
To disconnect the power cable or signal cable, always pull it by the plug\
. Never pull on the cable itself
as this may cause fire or electric shock.
DO NOT TOUCH THE PLUG WITH WET HANDS
Pulling or inserting the plug with wet hands may cause electric shock.
WHEN YOU INSTALL THE MONITOR ON YOUR COMPUTER
Be sure the computer is strong enough to hold the weight of the monitor, otherwise, you may damage
your computer.
DO NOT PUT FLOPPY DISKS NEAR THE SPEAKERS
Magnetically recorded data, such as on a floppy disk, may become corrupt\
ed by the magnetic field
produced by the speakers if the disks are placed on or near the speakers\
.
ERGONOMIC RECOMMENDATIONS
To eliminate eye fatigue, do not operate the monitor against a bright bac\
kground or in a dark room. For
optimal viewing comfort, the monitor should be just below eye level and \
40-60 cm (16-24 inches)
away from your eyes. When using the monitor over a prolonged time, a ten\
 minute break every hour
is recommended as looking at the screen continuously can cause eye strai\
n.
OTHERS
2     FOR YOUR SAFETY
PLE2001_3WS_WSV-e-M034B01.P65 2007/09/10, 18:196
 
						

							
ENGLISH
The following symptoms are normal with LCD monitors and do not indicate \
a problem.
NOTEWhen you first turn on the LCD monitor, the picture may not fit in the display area
because of the type of computer that is used. In this case, adjust the p\
icture
position to the correct position.
„
Due to  the nature  of the LCD screen, an afterimage of the previous screen may
remain after switching the image, when the same image is displayed for h\
ours. In
this case, the screen is recovered slowly by changing the image or turni\
ng off the
Power Switch for hours.
„
You may find slightly uneven brightness on the screen depending on the de\
sktop
pattern you use.
„
SPECIAL NOTES ON LCD MONITORS
Contact your dealer or iiyama service center for the backlight replaceme\
nt when the
screen is dark, flickering or not lighting up. Never attempt to replace \
it by yourself.
„ Due to the nature of the backlight, the screen may flicker during initia\
l use. Turn off
the Power Switch and then turn it on again to make sure the flicker disa\
ppears.
„
NOTEThe fluorescent light used in the LCD monitor may have to be periodicall\
y replaced.
For the warranty coverage on this component, please check with local iiy\
ama
service center.
If you have to return your unit for service and the original packaging h\
as been
discarded, please contact your dealer or iiyama service center for advic\
e or
replacement packaging.
„
„
WARNINGIf you drop any materials or liquids such as water into the monitor when\
 cleaning,
unplug the power cable immediately and contact your dealer or iiyama ser\
vice center.
„
CAUTIONFor safety reasons, turn off the power switch and unplug the monitor bef\
ore you
clean it.
„
NOTETo protect the LCD panel, do not scratch or rub the screen with a hard object.
„
Never use any of the following strong solvents. These will damage the ca\
binet and
the LCD screen.
„
Thinner
Benzine
Abrasive cleaner Spray-type cleaner
Wax
Acid or Alkaline solvent
Touching the cabinet with any product made from rubber or plastic for a l\
ong time
may cause degeneration or loss of paint on the cabinet.
„
CABINETStains can be removed with a cloth lightly moistened with a mild detergent\
 solvent. Then
wipe the cabinet with a soft dry cloth.
LCD
SCREENPeriodic cleaning with a soft dry cloth is recommended.
Dont use tissue paper etc. because these will damage the LCD screen.
CUSTOMER SERVICE
CLEANING
FOR YOUR SAFETY     3
PLE2001_3WS_WSV-e-M034B01.P65 2007/09/10, 18:19 7
 
						

							
ENGLISH
The following accessories are included in your package. Check to see if \
they are enclosed with the
monitor. If anything is missing or damaged, please contact your local  iiyama dealer or regional iiyama
office.*
1The rating of  the Power Cable enclosed in 120V area is 10A/125V. If you are using
a power supply higher than this rating, then a power cable with a rating\
 of 10A/
250V must be used.However, all guarantees and warranties are void for any
problems or damage caused by a power cable not supplied by iiyama.
*
2Accessory for ProLite E2001WS / E2003WS
„
Power Cable*
1„D-Sub Signal Cable „DVI-D Signal Ca ble*2
„Audio Cable „Stand „User  Manual
CAUTION
BEFORE YOU OPERATE THE MONITOR
CHEKING THE CONTENTS OF THE PACKAGE
CAUTION
FEATURES
‹
‹ ‹
‹
‹ 51.1cm (20.1) TFT Color LCD Monitor
‹
‹ ‹
‹
‹ Supports Resolutions up to 1680 × 1050
‹
‹ ‹
‹
‹ High Contrast 1000:1 / Quick Response Time 5ms : ProLite E2001
‹
‹ ‹
‹
‹ High Contrast 2000:1 (DCR) / Quick Response Time 2ms (Gray to Gray) \
:
ProLite E2003
‹
‹ ‹
‹
‹ Digital Character Smoothing
‹
‹ ‹
‹
‹ Automatic Set-up
‹
‹ ‹
‹
‹ Stereo Speakers
2 × 1W Stereo Speakers
‹
‹ ‹
‹
‹ Plug & Play VESA DDC2B Compliant
Windows
® 95/98/2000/Me/XP/Vista Compliant
‹
‹ ‹
‹
‹ Power Management (E
NERGY STA R® VESA DPMS Compliant)
‹
‹ ‹
‹
‹ Ergonomic Design: TCO ’03 and MPR 
3
3 3
3
3  Approved
‹
‹ ‹
‹
‹ Digital Input (DVI-D, HDCP Compliant) for Clear Display :
ProLite E2001WS / E2003WS
‹
‹ ‹
‹
‹ VESA Mounting Standard (100mm×100mm) Compliant
4     BEFORE YOU OPERATE THE MONITOR
PLE2001_3WS_WSV-e-M034B01.P65 2007/09/10, 18:19 8
 
						

							
ENGLISH
BEFORE YOU OPERATE THE MONITOR     5
HOW TO USE THE STAND
Install the Stand on a stable surface. The monitor may cause injury or damage if
it falls or is dropped.
„
Do not give a strong impact to the monitor. It may cause damage.
„
Unplug the monitor before installation to avoid electric shock or damage\
.
„
The monitor is shipped with the stand detached. Be sure to attach the st\
and before operating the
display and remove if it is necessary to re-box.
HOW TO USE THE STAND
CAUTION

1.
Put a piece of soft cloth on the table
beforehand to prevent the monitor from being
scratched. Lay the monitor flat on a table with
front face down.
2.  The Stand-Bottom is pulled up as shown in
the figure.
3.  Install the Stand-Base to the Stand-Bottom.

1. Put a piece of soft cloth on the table
beforehand to prevent the monitor from being
scratched. Lay the monitor flat on a table with
front face down.
2.  Hold down the hooks outside and pull the
Stand-Base away from the Stand-Bottom.
PLE2001_3WS_WSV-e-M034B01.P65 2007/09/10, 18:19 9
 
						

							
ENGLISH
  FRONT PANEL CONTROL
AAuto Button (AUTO)
B Exit / Volume Button (EXIT)
C Scroll  Down / Contrast  Button (     )
D Scroll Up / Brightness Button (     )
E Menu / Select Button (ENTER)
F Power Switch (     )
G Headphone Connector
H Power Indicator
Green:Normal operation
Orange: Power Management
The monitor enters into power management mode which reduces the power
consumption to less than 2W when receiving no horizontal and/or vertical\
sync signal.
I Speakers
J Audio Connector (LINE IN)
K AC Connector (POWER IN)
L DVI-D 24pin Connector (DVI) *
M D-SUB mini 15pin Connector (D-SUB)
N Keyhole for Security Lock
CONTROLS AND CONNECTORS
You can fasten a security lock and cable to prevent the monitor from bein\
g removed
without your permission.NOTE
6     BEFORE YOU OPERATE THE MONITOR
 
NOTE
AUTO
EXIT ENTER
* Available for ProLite E2001WS / E2003WS only.
PLE2001_3WS_WSV-e-M034B01.P65 2007/09/10, 18:19
10