Iiyama Prolite E1702s User Manual

							ENGLISH
Normal
Menu : 2
(Analog)
Return to MenuHighlight “Menu : 2” again.
Off
Mode1High contrast
Dark
Gamma
Mode1Brightness of back-light is reduced.
Mode2Brightness of back-light is reduced more than Mode1.
Economy ModeOffNormal
Mode2
Problem / Option Adjustment Item
NOTE
						

							ENGLISH
18     OPERATING THE MONITOR
Menu : 3
(Analog)
Japanese
Adjustment Item
Menu:3
1280 × 1024
H:80.0KHz  V:75.0Hz
Problem / Option                                             Button to Press
OSD Position1 2 3 4 5
You can move the OSD display area
to any one of the following 5 positions
within the overall display:
Italiano LanguageEnglish
DeutschEnglish
German
FrançaisEspañol
FrenchSpanish
Press the + Button to move the OSD in numerical order. Press
the – Button to move the OSD in reverse numerical order.
Too soft
Too loud
VolumeDirect
Return to Menu
Highlight “Menu : 3” again.
ResetNO
YESReturn to Menu.
Factory-preset data is restored.
NOTE
						

							ENGLISH
User
1280 × 1024
H:80.0KHz  V:75.0Hz
Menu:1
GR
B
Adjustment Item Problem / Option                               Button to Press
Too dark
Too brightBrightness *1
ContrastToo dull
Too intense
*1Adjust the Brightness when you are using the monitor in a dark room and feel the screen is too
bright.
Direct
Direct
Sharpness
Normal
Mode1High contrast
Mode2DarkGamma
Color Temp.Color 1: 9300K
1
NOTE
						

							ENGLISH
20     OPERATING THE MONITOR
Menu : 1
(Digital)
Return to MenuHighlight “Menu : 1” again.
Mode1Brightness of back-light is reduced.
Mode2Brightness of back-light is reduced more than Mode1.
Economy ModeOffNormal
Problem / Option Adjustment Item
NOTE
						

							ENGLISH
Menu : 2
(Digital)
Japanese
Adjustment Item
Menu:2
1280 × 1024
H:80.0KHz  V:75.0Hz
Problem / Option                                             Button to Press
OSD Position1 2 3 4 5
You can move the OSD display area
to any one of the following 5 positions
within the overall display:
Italiano LanguageEnglish
DeutschEnglish
German
FrançaisEspañol
French
Press the + Button to move the OSD in numerical order. Press
the – Button to move the OSD in reverse numerical order.
Too soft
Too loud
VolumeDirect
Return to Menu
Highlight “Menu : 2” again.
ResetNO
YESReturn to Menu.
Factory-preset data is restored.
NOTE
						

							ENGLISH
22     OPERATING THE MONITOR
SCREEN ADJUSTMENTS

						

							ENGLISH
+
–
F FF F
F1) Adjust the H-Position so that the left side of the picture frame will move to the left
edge of the display area.
NOTE
						

							ENGLISH
NOTE
						

							ENGLISH
0  2W 100% POWER
CONSUMPTION
Blue
Orange
Power Indicator
NORMAL MODE
POWER MANAGEMENT MODE
Even when using the power management mode, the monitor consumes electricity. Turn
off the Power Switch whenever the monitor is not in use, during the night and weekends,
to avoid unnecessary power consumption.NOTE
						

							ENGLISH
26     TROUBLE SHOOTING
TROUBLE SHOOTING
Perform the adjustments described in OPERATING THE MONITOR, depending on the problem you
have. If the monitor does not get a picture, skip to 2.
2. Consult the following items if you cannot find an appropriate adjustment item in OPERATING THE
MONITOR or if the problem persists.
If you are experiencing a problem which is not described below or you cannot correct the
problem, discontinue using the monitor and contact your dealer or iiyama service center for
further assistance. 3.
Problem Check
The picture does
not appear.
(Power indicator
does not light up.)
The Power Cable is firmly seated in the socket.