Iiyama Prolite B2712hds 1 User Manual

							ENGLISH
BEFORE YOU OPERATE THE MONITOR     6
CONNECTING YOUR MONITOR
 Ensure that both the computer and the monitor are switched off.
 Connect the computer to the monitor with the signal cable.
 Connect the monitor to the audio equipment with the Audio Cable for computer when using the 
audio features.
 Connect the Power Cable to the monitor fi rst and then to the power supply.
  Turn on your monitor and computer.
NOTE 

						

							ENGLISH
7     BEFORE YOU OPERATE THE MONITOR
ADJUSTING THE HEIGHT AND THE VIEWING ANGLE

						

							ENGLISH
OPERATING THE MONITOR     8
Picture
OSD
Display
Audio Settings
Miscellaneous
InformationBrightness
Contrast
H.Position
V.Position
Phase
Clock
Color Temp
Auto Adjust90
80
50
50
41
50
6500
1920x1080
OPERATING THE MONITOR
To create the best picture, your iiyama LCD monitor has been preset at the factory with the COMPLIANT 
TIMING shown on page 21. You are also able to adjust the picture by following the button operation 
shown below. For more detailed adjustments, see page 15 for SCREEN ADJUSTMENTS.
  Press the MENU Button to start the On Screen Display feature. There are 
additional Menu items which can be switched by using the     /     Buttons.  
  Select the Menu item which contains the adjustment icon relating to the 
adjustment you want to make. Press the MENU Button. Then, use the      /          
Buttons to highlight the desired adjustment icon. 
  Press the MENU Button again. Use the    /    Buttons to make the appropriate 
adjustment or setting. 
Adjustments for H. / V. Position, Clock and Phase are saved for each signal timing. Except for these 
adjustments, all other adjustments have only one setting which applies to all signal timings.
When button operations are aborted during adjustment, On-Screen Display disappears when the 
time set for the OSD Timeout has passed. Also, press the AUTO button to quickly turn off the On-
Screen Display.  
						

							ENGLISH
ADJUSTMENT MENU CONTENTS
Adjustment Item Problem / Option                                      Button to Press
Picture
Phase*2,3
Clock*2,3
Too left
Too right
Too low
Too highH. Position*3
V. Position*3
Too narrow
Too wide To correct fl ickering text or lines
*
1  Adjust the Brightness when you are using the monitor in a dark room and feel the screen is too bright.
*2   See page 15 for SCREEN ADJUSTMENTS.
*3 Only Analog Input.
*4   For best results, use the Auto Adjust in conjunction with the adjustment pattern. See page 15 for 
SCREEN ADJUSTMENTS.
Too dark 
Too bright Brightness*1
ContrastToo dull
Too intense
Yellowish white
Reddish white
Green
BlueToo weak
Too strong User
Bluish white
Color Temp.7500 9300
6500
Auto Adjust*3,4Adjust H. / V. Position, Clock and Phase automatically.
You can skip the Menu items and display an adjustment scale directly by using the following button 
operations.
Direct
z Auto Adjust: Press the Auto Button when the Menu is not displayed.
Picture
OSD
Display
Audio Settings
Miscellaneous
InformationBrightness
Contrast
H.Position
V.Position
Phase
Clock
Color Temp
Auto Adjust90
80
50
50
41
50
6500
1920x1080
Red
Direct
9     OPERATING THE MONITOR
 
						

							ENGLISH
OSD Timeout
H.PositionOSD is too left
OSD is too right
OSD is too low
OSD is too high
You can set the OSD display duration time 
between 5 and 30 seconds.
Adjustment Item Problem / Option                                      Button to Press
OSD
V.Position
H.Position
V.Position
OSD Timeout90
10
10
1920x1080
Picture
OSD
Display
Audio Settings
Miscellaneous
Information
OPERATING THE MONITOR     10
 
						

							ENGLISH
ACR*Increased Contrast Ratio
ON
OFF
Typical Contrast Ratio Display Mode
Expansion display
Full
Aspect
Expansion display of Aspect
OD 
It will improve the gray level response time of the LCD 
panel.
A higher level results in a faster response time.
Adjustment Item Problem / Option                                      Button to Press
Display
11     OPERATING THE MONITOR
Display Mode
Opticolor
ACR
ECO
Sharpness
OD50
0Full
1920x1080Picture
OSD
Display
Audio Settings
Miscellaneous
Information
Standard
OFF
OFF
Standard
Offi ce
Movie
Game
Scenery
Opticolor
ECO
Brightness of back-light is reduced.
ON
OFFNormal
Sharpness
For general windows environment and monitor 
default setting.
For text editing and viewing in a word processing 
environment.
For PC game environment. For movie and video environment.
For displaying outdoor scenery images
*  Contrast, Brightness, ECO and Opticolor cannot be adjusted and selected while ACR is active.Too soft
Too sharp
You can skip the Menu items and display an adjustment scale directly by using the following button 
operations.
z ECO: Press the     Button when the Menu is not displayed.
Direct
Direct
 
						

							ENGLISH
OPERATING THE MONITOR     12
Audio Input*
Volume
Adjustment Item Problem / Option                                      Button to Press
Audio Settings
Mute
Volume
Mute
Audio Input50
1920x1080
Picture
OSD
Display
Audio Settings
Miscellaneous
Information
OFF
Line in
Too soft
Too loud
Return the sound volume to the previous level. Turn off the sound temporarily.    
OFF ON
Select the HDMI input. Line in
Select the LINE IN input.
HDMI
You can skip the Menu items and display an adjustment scale directly by using the following button 
operations.
Direct
z Volume: Press the     Button when the Menu is not displayed.
Direct
*  Suitable for HDMI input only.
 
						

							ENGLISH
Language
Adjustment Item Problem / Option                                      Button to Press
Miscellaneous
Input Select
Language
Input Select
Reset
1920x1080
Picture
OSD
Display
Audio Settings
Miscellaneous
InformationEnglish
Auto
13     OPERATING THE MONITOR
ENGLISH
DEUTSCH English
German FRANÇAIS French Japanese
ITALIANO ItalianSimplifi ed Chinese
 
ESPAÑOL Spanish
Traditional Chinese
 
However it will automatically be selected when just one source is using. 
In Power Management Mode input switching is disabled.
Input source is fixed, not selected automatically when VGA, DVI and HDMI which are 
selected.NOTE
Select the D-SUB input.     
Select the DVI-D input.      VGA
DVI Auto Select the signal input automatically.
Select the HDMI input.      HDMI
Direct
Reset
Factory-preset data is restored.
You can skip the Menu items and display an adjustment scale directly by using the following button 
operations.
z Input Select:  Pressing and holding of the AUTO Button for 5 seconds when the Menu is not 
displayed.
Direct
 
						

							ENGLISH
OPERATING THE MONITOR     14
Adjustment Item Problem / Option                                      Button to Press
Information
1920x1080
H:67kHz  V:60Hz
Auto
SN:  xxxxxxxxxxxxx
1920x1080
Picture
OSD
Display
Audio Settings
Miscellaneous
Information
See your graphic card user guide for more information 
about changing the resolution and refresh.  NOTE
Displays information regarding the current input signal coming 
from the graphic card in your computer.
Information
 
						

							ENGLISH
SCREEN ADJUSTMENTS