Iiyama Prolite B2409hds 1 User Manual

							  ENGLISH
USER MANUAL
Thank you very much for choosing the 
iiyama LCD monitor.
We recommend that you take a few 
minutes to read carefully through this 
brief but comprehensive manual before 
installing and switching on the monitor. 
Please keep this manual in a safe 
place for your future reference.
 
						

							ENGLISH
 
						

							ENGLISH
Congratulations!
The display you have just purchased carries the TCO’03 Displays 
label. This means that your display is designed, manufactured 
and tested according to some of the strictest quality and 
environmental requirements in the world. This makes for a high 
performance product, designed with the user in focus that also 
minimizes the impact on our natural environment.
Some of the features of the TCO’03 Display requirements:
Ergonomics
•  Good visual ergonomics and image quality in order to improve the working environment for the user 
and to reduce sight and strain problems. Important parameters are luminance, contrast, resolution, 
refl ectance, colour rendition and image stability.
Energy
•  Energy-saving mode after a certain time – benefi cial both for the user and the environment
•  Electrical safety
Emissions
•  Electromagnetic fi elds
•  Noise emissions
Ecology
•  The product must be prepared for recycling and the manufacturer must have a certified 
environmental management system such as EMAS or ISO 14 001
•  Restrictions on
  o  chlorinated and brominated fl ame retardants and polymers
  o  heavy metals such as cadmium, mercury and lead.
The requirements included in this label have been developed by TCO Development in cooperation
with scientists, experts, users as well as manufacturers all over the world. Since the end of the 1980s 
TCO has been involved in influencing the development of IT equipment in a more user-friendly 
direction. Our labelling system started with displays in 1992 and is now requested by users and IT-
manufacturers all over the world.
For more information, please visit
www.tcodevelopment.com
 
						

							ENGLISH
CE MARKING DECLARATION OF CONFORMITY
This LCD monitor complies with the requirements of the EC Directive 2004/108/EC “EMC 
Directive” , 2006/95/EC “Low Voltage Directive” and 2009/125/EC “ErP Directive”.
The electro-magnetic susceptibility has been chosen at a level that gives correct operation in 
residential areas, business and light industrial premises and small-scale enterprises, inside as 
well as outside of the buildings. All places of operation are characterised by their connection to 
the public low voltage power supply system.
IIYAMA CORPORATION: Breguetlaan 8, 1438BC Oude Meer The Netherlands

						

							ENGLISH
FOR YOUR SAFETY ..............................................................................................   1
 SAFETY PRECAUTIONS ................................................................................  1
  SPECIAL NOTES ON LCD MONITORS ..........................................................  3
 CUSTOMER SERVICE ....................................................................................  3
 CLEANING .......................................................................................................  3
BEFORE YOU OPERATE THE MONITOR ............................................................   4
 FEATURES ......................................................................................................  4
  CHECKING THE CONTENTS OF THE PACKAGE .........................................   4
 
FITTING AND REMOVAL OF BASE : ProLite B2409HDS / ProLite B2409HDSD ..   5
  FITTING AND REMOVAL OF BASE : ProLite E2409HDS ..............................   6
 
CONTROLS AND CONNECTORS : ProLite B2409HDS / ProLite B2409HDSD..  7
  CONTROLS AND CONNECTORS : ProLite E2409HDS .................................   8
 
CONNECTING YOUR MONITOR : ProLite B2409HDS / ProLite B2409HDSD ..   9
  CONNECTING YOUR MONITOR : ProLite E2409HDS ..................................  10
 COMPUTER SETTING ....................................................................................  11
  ADJUSTING THE HIGHT AND THE VIEWING ANGLE :
  ProLite B2409HDS / ProLite B2409HDSD .......................................................  12
  ADJUSTING THE VIEWING ANGLE :ProLite E2409HDS ..............................  12
OPERATING THE MONITOR .................................................................................  13
  ADJUSTMENT MENU CONTENTS ................................................................  15
 SCREEN ADJUSTMENTS ...............................................................................  20
  POWER MANAGEMENT FEATURE ...............................................................  23
TROUBLE SHOOTING ..........................................................................................  24
RECYCLING INFORMATION .................................................................................  25
APPENDIX  ............................................................................................................  26
  SPECIFICATIONS : ProLite B2409HDS  .........................................................  26
  SPECIFICATIONS : ProLite B2409HDSD  ......................................................  27
  SPECIFICATIONS : ProLite E2409HDS  .........................................................  28
  DIMENSIONS : ProLite B2409HDS / ProLite B2409HDSD  ............................  29
  DIMENSIONS : ProLite E2409HDS  ................................................................  29
 COMPLIANT TIMING .......................................................................................  30
TABLE OF CONTENTS
 
						

							ENGLISH
FOR YOUR SAFETY
WARNING
STOP OPERATING THE MONITOR IF YOU ARE AWARE OF ANY PROBLEMS
If you notice any abnormal phenomena such as smoke, strange sounds or fumes, unplug the monitor 
and contact your dealer or iiyama service center immediately. Further use may be dangerous and can 
cause fi re or electric shock.
NEVER REMOVE THE CABINET
High voltage circuits are inside the monitor. Removing the cabinet may expose you to the danger of fi re 
or electric shock.
DO NOT PUT ANY OBJECT INTO THE MONITOR
Do not put any solid objects or liquids such as water into the monitor. In case of an accident, unplug 
your monitor immediately and contact your dealer or iiyama service center. Using the monitor with any 
object inside may cause fi re, electric shock or damage.
INSTALL THE MONITOR ON A FLAT, STABLE SURFACE
The monitor may cause an injury if it falls or is dropped.
DO NOT USE THE MONITOR NEAR WATER
Do not use where water may be splashed or spilt onto the monitor as it may cause fi re or electric 
shock.
OPERATE UNDER THE SPECIFIED POWER SUPPLY
Be sure to operate the monitor only with the specifi ed power supply. Use of an incorrect voltage will 
cause malfunction and may cause fi re or electric shock.
PROTECT THE CABLES
Do not pull or bend the power cable and signal cable. Do not place the monitor or any other heavy 
objects on the cables. If damaged, the cables may cause fi re or electric shock.
ADVERSE WEATHER CONDITIONS
It is advisable not to operate the monitor during a heavy thunder storm as the continual breaks in 
power may cause malfunction. It is also advised not to touch the plug in these circumstances as it may 
cause electric shock.
SAFETY PRECAUTIONS
1     FOR YOUR SAFETY    
 
						

							ENGLISH
FOR YOUR SAFETY     2
CAUTION
INSTALLATION LOCATION
Do not install the monitor where sudden temperature changes may occur, or in humid, dusty or smoky 
areas as it may cause fi re, electric shock or damage. You should also avoid areas where the sun 
shines directly on the monitor.
DO NOT PLACE THE MONITOR IN A HAZARDOUS POSITION
The monitor may topple and cause injury if not suitably located. Please also ensure that you do not 
place any heavy objects on the monitor, and that all cables are routed such that children may not pull 
the cables and possibly cause injury.
MAINTAIN GOOD VENTILATION
Ventilation slots are provided to keep the monitor from overheating. Covering the slots may cause fi re. 
To allow adequate air circulation, place the monitor at least 10 cm (or 4 inches) from any walls.
Do not remove the tilt stand when operating the monitor. Ventilation slots on the back of the cabinet 
will be blocked and the monitor may overheat if the stand is removed. This may cause fi re or damage. 
Operating the monitor on its back, side, upside down or on a carpet or any other soft material may also 
cause damage.
DISCONNECT THE CABLES WHEN YOU MOVE THE MONITOR
When you move the monitor, turn off the power switch, unplug the monitor and be sure the signal cable 
is disconnected. If you do not disconnect them, it may cause fi re or electric shock.
UNPLUG THE MONITOR
If the monitor is not in use for a long period of time it is recommended that it is left unplugged to avoid 
accidents. 
HOLD THE PLUG WHEN DISCONNECTING
To disconnect the power cable or signal cable, always pull it by the plug. Never pull on the cable itself 
as this may cause fi re or electric shock.
DO NOT TOUCH THE PLUG WITH WET HANDS
Pulling or inserting the plug with wet hands may cause electric shock.
WHEN YOU INSTALL THE MONITOR ON YOUR COMPUTER
Be sure the computer is strong enough to hold the weight of the monitor, otherwise, you may damage 
your computer.
ERGONOMIC RECOMMENDATIONS
To eliminate eye fatigue, do not operate the monitor against a bright background or in a dark room. 
For optimal viewing comfort, the monitor should be just below eye level and 40-60 cm (16-24 inches) 
away from your eyes. When using the monitor over a prolonged time, a ten minute break every hour is 
recommended as looking at the screen continuously can cause eye strain.
OTHERS
 
						

							ENGLISH
The following symptoms are normal with LCD monitors and do not indicate a problem.
NOTEWhen you fi rst turn on the LCD monitor, the picture may not fi t in the display area 
because of the type of computer that is used. In this case, adjust the picture position 
to the correct position.
						

							ENGLISH
The following accessories are included in your package. Check to see if they are enclosed with the monitor. 
If anything is missing or damaged, please contact your local  iiyama dealer or regional iiyama offi ce.
BEFORE YOU OPERATE THE MONITOR
CHEKING THE CONTENTS OF THE PACKAGE
BEFORE YOU OPERATE THE MONITOR     4
FEATURES

						

							ENGLISH
Put the monitor on a stable surface. The monitor may cause injury or damage if it 
falls or is dropped.