Iiyama Prolite B2209hds 1 User Manual

							ENGLISH
BEFORE YOU OPERATE THE MONITOR     6


A   Put a piece of soft cloth on the table beforehand to  
  prevent the monitor from being scratched.    
  Lay the monitor fl at on a table with front face down. 
B   Insert stand into the monitor as shown in fi gure.
C  Install the stand-base to the stand.
A   Put a piece of soft cloth on the table beforehand to  
  prevent the monitor from being scratched.    
  Lay the monitor fl at on a table with front face down. 
B   Press and hold the hooks inside, and pull the         
 Stand-Base.
C Insert thin stick into hole, push stick in whilst pulling  
 the stand away.
FITTING AND REMOVAL OF BASE : ProLite E2209HDS
Stand
Stand
Stand-Base
Hooks
Release hole
Thin Stick
Put the monitor on a stable surface. The monitor may cause injury or damage if it 
falls or is dropped.
						

							ENGLISH
CONTROLS AND CONNECTORS : ProLite B2209HDS
 Power Switch (     ) 
 Power Indicator 
   Blue:  Normal operation
   Orange: Power Management
      The monitor enters into power management mode which reduces the power  
    consumption to less than 1W when receiving no horizontal and/or vertical  
    sync signal.  
 Menu / Select Button (MENU)  
  + / Volune Button ( + )
  - / ECO Mode Button ( - )        
   Auto Button (AUTO)
 Speakers 
  AC Connector (AC IN)
 Cable Holder
 Keyhole for Security Lock 
          You can fasten a security lock and cable to prevent the monitor from being removed  
        without your permission.
  Headphone Connector (AUDIO)
 Audio Connector (AUDIO)
 
 D-SUB mini 15pin Connector (D-SUB)
 DVI-D 24pin Connector (DVI)
 HDMI Connector (HDMI)
NOTE
 
NOTE
7     BEFORE YOU OPERATE THE MONITOR
HDMIDVI-D D-SUB AUDIO
 
						

							ENGLISH
BEFORE YOU OPERATE THE MONITOR     8
CONTROLS AND CONNECTORS : ProLite E2209HDS
 Power Switch (     ) 
 Power Indicator 
   Blue:  Normal operation
   Orange: Power Management
      The monitor enters into power management mode which reduces the power  
    consumption to less than 1W when receiving no horizontal and/or vertical  
    sync signal.  
 Menu / Select Button (MENU)  
  + / Volune Button ( + )
  - / ECO Mode Button ( - )        
   Auto Button (AUTO)
 Speakers 
  AC Connector (AC IN)
 Keyhole for Security Lock 
          You can fasten a security lock and cable to prevent the monitor from being removed  
        without your permission.
 Headphone Connector (AUDIO)
 Audio Connector (AUDIO)
 
 D-SUB mini 15pin Connector (D-SUB)
 DVI-D 24pin Connector (DVI)
 HDMI Connector (HDMI)
NOTE
 
NOTE
HDMIDVI-D D-SUB AUDIO
 
						

							ENGLISH
CONNECTING YOUR MONITOR : ProLite B2209HDS
 Ensure that both the computer and the monitor are switched off.
 Connect the computer to the monitor with the signal cable.
 Connect the monitor to the audio equipment with the Audio Cable for computer when using the 
audio features.
 Connect the Power Cable to the monitor fi rst and then to the power supply.
  Turn on your monitor and computer.
NOTE 

						

							ENGLISH
BEFORE YOU OPERATE THE MONITOR     10
CONNECTING YOUR MONITOR : ProLite E2209HDS
 Ensure that both the computer and the monitor are switched off.
 Connect the computer to the monitor with the signal cable.
 Connect the monitor to the audio equipment with the Audio Cable for computer when using the 
audio features.
 Connect the Power Cable to the monitor fi rst and then to the power supply.
  Turn on your monitor and computer.
NOTE 

						

							ENGLISH

						

							ENGLISH
BEFORE YOU OPERATE THE MONITOR     12
ADJUSTING THE HEIGHT AND THE VIEWING ANGLE : ProLite B2209HDS

						

							ENGLISH
OPERATING THE MONITOR
To create the best picture, your iiyama LCD monitor has been preset at the factory with the COMPLIANT 
TIMING shown on page 29. You are also able to adjust the picture by following the button operation 
shown below. For more detailed adjustments, see page 20 for SCREEN ADJUSTMENTS.
  Press the MENU Button to start the On Screen Display feature. There are additional 
Menu items which can be switched by using the + / - Buttons.  
B  Select the Menu item which contains the adjustment icon relating to the adjustment 
you want to make. Press the MENU Button. Then, use the + / - Buttons to highlight 
the desired adjustment icon. 
C  Press the MENU Button again. Use the + / - Buttons to make the appropriate 
adjustment or setting. 
Adjustments for H. / V. Position, Clock and Phase are saved for each signal timing. Except for these 
adjustments, all other adjustments have only one setting which applies to all signal timings.
When button operations are aborted during adjustment, On-Screen Display disappears when the 
time set for the Timeout has passed. Also, the AUTO button can be used to return previous menu 
and turn off the On-Screen Display. 
						

							ENGLISH
OPERATING THE MONITOR     14
ADJUSTMENT MENU CONTENTS
Adjustment Item Problem / Option                                      Button to Press
Luminance
Too dark 
Too bright Brightness * ContrastToo dull
Too intense
*
  Adjust the Brightness when you are using the monitor in a dark room and feel the screen is too 
bright.
Luminance
Contrast
Brightness
Eco
Picture Mode50
50
Off
Standard
ACR
ON
Mode1 Brightness of back-light is reduced.
Mode2Brightness of back-light is reduced more than Mode1. Off Normal
Eco 
Mode3Brightness of back-light is reduced more than Mode2.
Picture ModeStandardFor general windows environment and monitor 
default setting.
TextFor text editing and viewing in a word processing 
environment.
InternetFor internet environment.
Game
For PC game environment.
MovieFor movie and video environment.
Sport
For sport environment.
ACRIncreased Contrast Ratio
On
Off
Typical Contrast Ratio
ACR adjusts brightness according to the image, and improve the contrast ratio during 
move playing.
Contrast, Brightness, sRGB, Eco and Picture Mode cannot be adjusted and selected while 
ACR is active.
NOTE
You can skip the Menu items and display an adjustment scale directly by using the following button 
operations.
z Eco: Press the - Button when the Menu is not displayed.
Direct
Direct
 
						

							ENGLISH
Adjustment Item Problem / Option                                      Button to Press
Image Setup
Phase*1,2
Clock*1,2
Too left
Too right
Too low
Too highH. Position*2
V. Position*2
Too narrow
Too wide
To correct fl ickering text or lines
Image Setup
Clock
Phase
H.Position
V.Position50
50
50
50
AspectFull
*1  See page 20 for SCREEN ADJUSTMENTS.
*
2 Only Analog Input.
Expansion display Full
Aspect
Expansion display of Aspect
Aspect
15     OPERATING THE MONITOR