Iiyama Prolite B2206ws 1 User Manual

ENGLISH
  FRONT PANEL CONTROL
APower Switch (     )
BMenu / Select Button (MENU)
C+ / Volume Button ( + )
D- / ECO Button ( - )
EAuto Button (AUTO)
FSignal Select Button (SOURCE)
GPower Indicator
Blue:Normal operation
Orange:Power Management
The monitor enters into power management mode which reduces the power
consumption to less than 2W when receiving no horizontal and/or vertical
sync signal.
HSpeakers
ID-SUB mini 15pin Connector (D-SUB)
JDVI-D 24pin Connector (DVI-D)
KCable Holder
LAudio Connector...

ENGLISH
Power Cable
(Accessory)
Audio Cable (Accessory)
Computer D-Sub Signal Cable 
(Accessory)
DVI-D Signal Cable 
(Accessory)
7     BEFORE YOU OPERATE THE MONITOR
CONNECTING YOUR MONITOR
[Example of Connection]
AEnsure that both the computer and the monitor are switched off.
BConnect the computer to the monitor with the signal cable.
CConnect the monitor to the audio equipment with the Audio Cable for computer when using the
audio features.
DConnect the Power Cable to the monitor first and then to the...

ENGLISH
BEFORE YOU OPERATE THE MONITOR     8
„Signal Timing
Change to the desired signal timing listed on page 24: COMPLIANT TIMING.
„Windows 95/98/2000/Me/XP/Vista Plug & Play
The iiyama LCD monitor complies with DDC2B of VESA standard. The Plug & Play function runs on
Windows 95/98/2000/Me/XP/Vista by connecting the monitor to DDC2B compliant computer with
the Signal Cable supplied.
For installation on Windows 95/98/2000/Me/XP: The monitor Information File for iiyama monitors
may be necessary for your...

ENGLISH
9     OPERATING THE MONITOR
ADJUSTING
OPERATING THE MONITOR
To create the best picture, your iiyama LCD monitor has been preset at the factory with the COMPLIANT
TIMING shown on page 24. You are also able to adjust the picture by following the button operation
shown below. For more detailed adjustments, see page 16 for SCREEN ADJUSTMENTS.
( (( (
(Press the MENU Button to start the On Screen Display feature. There are
additional Menu items which can be switched by using the + / - Buttons.
B BB B...

ENGLISH
ADJUSTMENT MENU CONTENTS
Adjustment Item Problem / Option                                      Button to Press
Luminance
Too dark
Too bright Brightness * ContrastToo dull
Too intense
* Adjust the Brightness when you are using the monitor in a dark room and feel the screen is too
bright.
OPERATING THE MONITOR     10
Luminance
Contrast
Brightness
Eco
Picture Mode
50
50
Off
Standard
ACRON
Mode1Brightness of back-light is reduced.
Mode2
Brightness of back-light is reduced more than Mode1. O f f...

ENGLISH
11     OPERATING THE MONITOR
Adjustment Item Problem / Option                                      Button to Press
Image Setup
Phase* Clock*
Too left
Too right
Too low
Too highH. Position
V. Position
Too narrow
Too wide
To correct flickering text or lines
Only Analog  Input
Image Setup
Clock
Phase
H.Position
V.Position
50
50
50
50
Aspect
Full
Aspect
Expansion display of Aspect
Expansion display
Full
Aspect
* See page 16 for SCREEN ADJUSTMENTS.
 

ENGLISH
Adjustment Item Problem / Option                                      Button to Press
Color Temp.
Yellowish white
Bluish white
User-G User-R
User-BToo weak
Too strong User
Greenish white Normal Mode1
Mode2
High contrast Dark
Mode3
Color Temp.
Gamma
User-R
User-G
User-B
50
50 Mode1
50
Color Temp.
Warm
Gamma
Color Temp.Normal Warm
Cool
sRGB sRGB
NOTE„sRGB is an international standard which defines and unifies the difference of color
appearance between equipment.
„You can not adjust the Brightness,...

ENGLISH
13     OPERATING THE MONITOR
Language
English
DeutschEnglish
German
Français French
JapanesePortuguese
Italiano ItalianRussian
Simplified Chinese
Español SpanishPortuguese
Timeout
H.PositionOSD is too left
OSD is too right
OSD is too low
OSD is too high
You can set the OSD display duration time
between 5 and 60 seconds.
Adjustment Item Problem / Option                                      Button to Press
OSD Setup
V.Position
OSD Setup
H.Position
V.Position
Timeout
Language
50
50
English
50
 

ENGLISH
See your graphic card user guide for more information
about changing the resolution and refresh.NOTE
Displays information regarding the current input signal coming
from the graphic card in your computer.
Information
Adjustment Item Problem / Option                                      Button to Press
Others
ResetFactory-preset data is restored.
NoReturn to Menu. Ye s
Signal Select
At selected Auto, you can switch the input source by pushing SOURCE button
successively, However it will...

ENGLISH
15     OPERATING THE MONITOR
Adjustment Item Problem / Option                                      Button to Press
VolumeToo soft
Too loud
Adjustment Item Problem / Option                                      Button to Press
Auto Adjust  * You can skip the Menu items and display an adjustment scale directly by using the following
button operations.
Direct
Adjust H. / V. Position, Clock and Phase automatically.
* For best results, use the Auto Adjust in conjunction with the adjustment pattern. See...