Iiyama E2407hdsv 1 User Manual

							
DEU TS C H
FR ANÇ AIS
EN G LIS H
U SE RMANU AL
Thank youvery much forchoosing theiiyama
L C D monit o r.
W erecommend thatyoutake afew minutes to
r e ad ca re fu lly th ro ugh th is brie f but
c o m pre hensiv e manual befo re in sta llin g and
s w it c h in g on th e monit o r. Ple ase ke ep th is
m anual in asa fe pla ce fo r yo ur fu tu re
r e fe re nce .N ED ER LA N D
PO LS KI
 
						

							
| Servicecard
Dear user, we congratulate youon the purchase of your iiyama LCD.
iiyama 
All iiyama LCD monitors comply with the ISO13406-2 standard for pixel de\
fects. 
For details on warranty and locally used pixel policies that apply direc\
tly after installation of your product 
please check the iiyama website.
In case of a defect, please call your local support hotline.
Before reporting the screen defect, please 
prepare the following information/evidence:
| model number *
| purchase receipt and serial number *
| shor t description of the defect
Important 
Note:
If there is no fault found in the collected 
equipment after inspection,
the transferring par ty shall incur charges 
for transpor t and administration. 
* see the identification plate on the back of the case.
Things to check before you call the iiyama information line 
If you have checked all of the above and there is still no picture, call our information line for assistance in your country.  | if the power cable is connected securely and turned on?
| if the display has been turned on?
| if the signal cable is connected securely and the correct input selected\
?
| if the computer has been restarted with the display connected?
| if the graphics card is correctly installed with the latest drivers poss\
ible?
| if the correct native resolution has been selected via Display Properti\
es? | If the R/G/B signal configuration is correct?
| if the displays On Screen Menu is shown?
| if the correct brightness and contrast settings have been set?
| if given display tolerances and compatibility have been considered?
| if via the On Screen Menu you have performed 
  a Factory Reset/Recall?
www.iiyama.com
Austria
  +49 1805 44 92 62 
Belgium
  +31 30 240 80 20
Bulgaria
  0 2 9880300
Czech Republik
  220 121 432
Denmark
  0 96 360 374
Estonia
  0 6671796
Finland 
  0 9 56186130
France 
  0 825 828 936
Germany 
  0 1805 44 92 62
Great Britain
  0 870 224 95 95 
Greece
  0 210 289 2000
Hungary 
  06 1 814 8080; 06 1 340 9951
Italy 
  +49 1805 44 92 62Latvia  0 7408838
Lithuania
  0 37 328442;  0 52 2101160 
Norway
  +45 96 360 374
Poland 
  0 801 449262
Portugal
  800 834 196 
Romania
  0 21 210 38 09 33
Russia, Kaliningrad 
  0 4012631061
Slovak Republik 
  0 244 648 151
Spain
  902 014 909
Sweden
  0 13 20 14 20
The Netherlands 
  0 900-6664867
Ukraine
  0 44 458 38 70
Country   Phone Number Country  Phone Number
 
						

							
ENGLISH

CE MARKING DECLARATION OF CONFORMITY
This  LCD  monitor  complies  with  the  requirements  of  the  EC  Directive    2004/108/EC  “EMC  Directive”  and 
2006/95/EC “Low Voltage Directive”.The electro-magnetic susceptibility has been chosen at a level that gives 
correct operation in residential areas,business and light industrial premises and small-scale enterprises, inside 
as well as outside of the buildings.All places of operation are characterised by their connection to the public 
low voltage power supply system.
	 We	 reserve 	 the 	 right 	 to 	 change 	 specifications 	 without 	 notice. All trademarks used in this user manual are the property of their respec\
tive owners.   As an ENERGY STAR® Partner, iiyama has determined that this product meets the ENERGY STAR® guidelines for energy efficiency.
You can access the Web page of different countries from there.

We recommend recycling of used product. Please contact your dealer or iiyama service center. Recycle 
information is obtained via the Internet, using the address:http://www.iiyama.com
 
						

							
ENGLISH

FOR YOUR SAFETY ........................................................................\
......  1
  SAFETY PRECAUTIONS ................................................................  1
  SPECIAL NOTES ON LCD MONITORS ..........................................  3
  CUSTOMER SERVICE ....................................................................  3
  CLEANING .......................................................................................  3
BEFORE YOU OPERATE THE MONITOR ............................................  4
  CHECKING THE CONTENTS OF THE PACKAGE .........................  4
  HOW TO USE THE STAND .............................................................  5
  CONTROLS AND CONNECTORS ..................................................  6
  CONNECTING YOUR MONITOR ....................................................  7
  COMPUTER SETTING ....................................................................  8
  ADJUSTING THE VIEWING ANGLE ...............................................  8
OPERATING THE MONITOR .................................................................  9
 ADJUSTMENT MENU CONTENTS ................................................. 10  
  SCREEN ADJUSTMENTS ............................................................... 14
  POWER MANAGEMENT FEATURE ............................................... 17
TROUBLE SHOOTING  ........................................................................\
.. 18
APPENDIX  ........................................................................\
.................... 20
      SPECIFICATIONS : ProLite E2407HDS-B1......................................20                 
      SPECIFICATIONS : ProLite E2407HDS-B2......................................21
      SPECIFICATIONS : ProLite E2407HDSV-B1....................................22
      DIMENSIONS....................................................................................23
      COMPLIANT TIMING..................................................................\
......23
 
TABLE OF CONTENTS
 
						

							
ENGLISH

    FOR YOUR SAFETY     1     
FOR YOUR SAFETY

WARNING
STOP OPERATING THE MONITOR WHEN YOU SENSE TROUBLE
If you notice any abnormal phenomena such as smoke, strange sounds or fumes, unplug the monitor 
and contact your dealer or iiyama service center immediately. Further use may be dangerous and can 
cause	 fire 	 or 	 electric 	 shock.
NEVER REMOVE THE CABINET
High voltage circuits are inside the monitor. Removing the cabinet may expose you to the danger of 
fire	 or 	 electric 	 shock.
DO NOT PUT ANY OBJECT INTO THE MONITOR
Do not put any solid objects or liquids such as water into the monitor. In case of an accident, unplug 
your monitor immediately and contact your dealer or iiyama service center. Using the monitor with any 
object	 inside 	 may 	 cause 	 fire, 	 electric 	 shock 	 or 	 damage.
INSTALL THE MONITOR ON A FLAT, STABLE SURFACE
The monitor may cause an injury if it falls or is dropped.
DO NOT USE THE MONITOR NEAR WATER
Do	 not 	 use 	 where 	 water 	 may 	 be 	 splashed 	 or 	 spilt 	 onto 	 the 	 monitor 	 as 	 it 	 may 	 cause 	 fire 	 or 	 electric 	
shock.
OPERATE UNDER THE SPECIFIED POWER SUPPLY
Be	 sure 	 to 	 operate 	 the 	 monitor 	 only 	 with 	 the 	 specified 	 power 	 supply. 	 Use 	 of 	 an 	 incorrect 	 voltage 	 will 	
cause	 malfunction 	 and 	 may 	 cause 	 fire 	 or 	 electric 	 shock.
PROTECT THE CABLES
Do  not  pull  or  bend  the  power  cable  and  signal  cable.  Do  not  place  the  monitor  or  any  other  heavy 
objects	 on 	 the 	 cables. 	 If 	 damaged, 	 the 	 cables 	 may 	 cause 	 fire 	 or 	 electric 	 shock.
ADVERSE WEATHER CONDITIONS
It  is  advisable  not  to  operate  the  monitor  during  a  heavy  thunder  storm  as  the  continual  breaks  in 
power  may  cause  malfunction.  It  is  also  advised  not  to  touch  the  plug  in  these  circumstances  as  it 
may cause electric shock.
SAFETY PRECAUTIONS
 
						

							
ENGLISH

CAUTION
INSTALLATION LOCATION
Do not install the monitor where sudden temperature changes may occur, or in humid, dusty or smoky 
areas	 as 	 it 	 may 	 cause 	 fire, 	 electric 	 shock 	 or 	 damage. 	 You 	 should 	 also 	 avoid 	 areas 	 where 	 the 	 sun 	
shines directly on the monitor.
DO NOT PLACE THE MONITOR IN A HAZARDOUS POSITION
The monitor may topple and cause injury if not suitably located. Please also ensure that you do not 
place any heavy objects on the monitor, and that all cables are routed such that children may not pull 
the cables and possibly cause injury.
MAINTAIN GOOD VENTILATION
Ventilation	 slots 	 are 	 provided 	 to 	 keep 	 the 	 monitor 	 from 	 overheating. 	 Covering 	 the 	 slots 	 may 	 cause 	 fire. 	
To allow adequate air circulation, place the monitor at least 10 cm (or \
4 inches) from any walls.
Do not remove the tilt stand when operating the monitor. Ventilation slots on the back of the cabinet 
will	 be 	 blocked 	 and 	 the 	 monitor 	 may 	 overheat 	 if 	 the 	 stand 	 is 	 removed. 	 This 	 may 	 cause 	 fire 	 or 	 damage. 	
Operating  the  monitor  on  its  back,  side,  upside  down  or  on  a  carpet  or  any  other  soft  material  may 
also cause damage.
DISCONNECT THE CABLES WHEN YOU MOVE THE MONITOR
When you move the monitor, turn off the power switch, unplug the monitor and be sure the signal cable 
is	 disconnected. 	 If 	 you 	 do 	 not 	 disconnect 	 them, 	 it 	 may 	 cause 	 fire 	 or 	 electric 	 shock.
UNPLUG THE MONITOR
If the monitor is not in use for a long period of time it is recommended that it is left unplugged to avoid 
accidents. 
HOLD THE PLUG WHEN DISCONNECTING
To disconnect the power cable or signal cable, always pull it by the plug. Never pull on the cable itself 
as	 this 	 may 	 cause 	 fire 	 or 	 electric 	 shock.
DO NOT TOUCH THE PLUG WITH WET HANDS
Pulling or inserting the plug with wet hands may cause electric shock.
WHEN YOU INSTALL THE MONITOR ON YOUR COMPUTER
Be sure the computer is strong enough to hold the weight of the monitor, otherwise, you may damage 
your computer.
DO NOT PUT FLOPPY DISKS NEAR THE SPEAKERS
Magnetically	 recorded 	 data, 	 such 	 as 	 on 	 a 	 floppy 	 disk, 	 may 	 become 	 corrupted 	 by 	 the 	 magnetic 	 field 	
produced by the speakers if the disks are placed on or near the speakers\
.
ERGONOMIC RECOMMENDATIONS
To eliminate eye fatigue, do not operate the monitor against a bright background or in a dark room. 
For optimal viewing comfort, the monitor should be just below eye level and 40-60 cm (16-24 inches) 
away from your eyes. When using the monitor over a prolonged time, a ten minute break every hour 
is recommended as looking at the screen continuously can cause eye strai\
n.

OTHERS
 2       FOR YOUR SAFETY     
 
						

							
ENGLISH

The following symptoms are normal with LCD monitors and do not indicate \
a problem.

NOTEWhen	 you 	 first 	 turn 	 on 	 the 	 LCD 	 monitor, 	 the 	 picture 	 may 	 not 	 fit 	 in 	 the 	 display 	 area 	
because of the type of computer that is used. In this case, adjust the picture position 
to the correct position.

Due  to  the  nature  of  the  LCD  screen,  an  afterimage  of  the  previous  screen  may 
remain  after  switching  the  image,  when  the  same  image  is  displayed  for  hours.  In 
this  case,  the  screen  is  recovered  slowly  by  changing  the  image  or  turning  off  the 
Power Switch for hours.

You	 may 	 find 	 slightly 	 uneven 	 brightness 	 on 	 the 	 screen 	 depending 	 on 	 the 	 desktop 	
pattern you use.

SPECIAL NOTES ON LCD MONITORS
Contact your dealer or iiyama service center for the backlight replacement when the 
screen	 is 	 dark, 	 flickering 	 or 	 not 	 lighting 	 up. 	 Never 	 attempt 	 to 	 replace 	 it 	 by 	 yourself.

Due	 to 	 the 	 nature 	 of 	 the 	 backlight, 	 the 	 screen 	 may 	 flicker 	 during 	 initial 	 use. 	 Turn 	 off 	
the	 Power 	 Switch 	 and 	 then 	 turn 	 it 	 on 	 again 	 to 	 make 	 sure 	 the 	 flicker 	 disappears.


NOTEThe	 fluorescent 	 light 	 used 	 in 	 the 	 LCD 	 monitor 	 may 	 have 	 to 	 be 	 periodically 	 replaced. 	
For the warranty coverage on this component, please check with local iiyama service 
center.
If you have to return your unit for service and the original packaging has been discarded, 
please  contact  your  dealer  or  iiyama  service  center  for  advice  or  replacement 
packaging.



WARNINGIf you drop any materials or liquids such as water into the monitor when cleaning, unplug 
the power cable immediately and contact your dealer or iiyama service ce\
nter.


CAUTIONFor  safety  reasons,  turn  off  the  power  switch  and  unplug  the  monitor  before  you 
clean it.


NOTETo protect the LCD panel, do not scratch or rub the screen with a hard ob\
ject.
Never use any of the following strong solvents. These will damage the cabinet and 
the LCD screen.

Thinner
Benzine
Abrasive cleaner
Spray-type cleaner
Wax
Acid or Alkaline solvent
Touching the cabinet with any product made from rubber or plastic for a long time may 
cause degeneration or loss of paint on the cabinet.

CABINETStains can be removed with a cloth lightly moistened with a mild detergent solvent. Then 
wipe the cabinet with a soft dry cloth. 
LCD
SCREEN
Periodic cleaning with a soft dry cloth is recommended.
Don't use tissue paper etc. because these will damage the LCD screen.
CUSTOMER SERVICE
CLEANING
      FOR YOUR SAFETY      3     
 
						

							
ENGLISH

The following accessories are included in your package. Check to see if they are enclosed with the 
monitor. If anything is missing or damaged, please contact your local  iiyama dealer or regional iiyama 
office.
*1 The rating of the Power Cable enclosed in 120V area is 10A/125V. If you are using  
  a power supply higher than this rating, then a power cable with a rating of 10A/   
    250V must be used.However, all guarantees and warranties are void for any    
    problems or damage caused by a power cable not supplied by iiyama.
*2 Not available for ProLite E2407HDSV
 Power Cable*1	 VGA Cable    Audio Cable
 DVI-D Cable*2    User Manual                           Stand		                                  
CAUTION
BEFORE YOU OPERATE THE MONITOR
CHECKING THE CONTENTS OF THE PACKAGE

CAUTION
FEATURES
 60cm (24") TFT Color LCD Monitor
 Supports Resolutions up to 1920 × 1080
 High Contrast 1000:1 , ACR Function Available/ High Brightness 300cd/m2 /   
Quick Response Time 2ms (Gray to Gray)
 Stereo Speakers
  2 × 3W Stereo Speakers
  HDMI interface:ProLite E2407HDS-B1
	Plug & Play VESA DDC1/2B Compliant
 Windows® 95/98/2000/Me/XP/Vista Compliant
 Power Management (ENERGY STAR® VESA DPMS Compliant)
 VESA Mounting Standard (100mm x 100mm) Compliant
 4       BEFORE YOU OPERATE THE MONITOR   
 
						

							
ENGLISH

      BEFORE YOU OPERATE THE MONITOR     5
HOW TO USE THE STAND
Install the Stand on a stable surface. The monitor may cause injury or damage if 
it falls or is dropped.

 
Do not give a strong impact to the monitor. It may cause damage.
Unplug the monitor before installation to avoid electric shock or damage\
.
The  monitor  is  shipped  with  the  stand  detached.  Be  sure  to  attach  the  stand  before  operating  the 
display and remove if it is necessary to re-box.
HOW TO USE THE STAND

CAUTION
1. Lay	 the 	 monitor 	 flat 	 on 	 a 	 table 	 with 	 front 	 face 	 down 	 (see 	 Fig 	 1). 	 Put 	 a 	 piece 	 of 	 soft 	 cloth 	 on 	 the 			
    table beforehand to prevent the monitor from being scratched.
2. Unpack the stand and mount it onto the monitor base with aligning it to \
the hook (see Fig 2).
3. Slide	 the 	 stand 	 upward 	 until 	 it 	 makes 	 a 	 click 	 sound, 	 indicating 	 it 	 is 	 fixed 	 (see 	 Fig 	 3).
4. Stand the monitor up (see Fig 4).
(Fig 4)
(Fig 1) (Fig 2)
(Fig 3)
 
						

							
ENGLISH

  FRONT PANEL CONTROL
 Menu / Input Select shortcut keys (     )*1     
 Scroll  Down / Brightness/Contrast/ACR/ECO Mode shortcut keys() 
 Scroll Up / OptiColor Mode ()*4
 Select / Input select (     )
 Power Indicator 
  Blue:  Normal operation    Orange:   Power Management
     
The monitor enters into power management mode which reduces                                            

                          the power consumption to less than 1W when rec\
eiving no horizontal and/                                             
 

                    or vertical sync signal.
   Power Switch (     ) 
 AC Connector (Power IN)   
 DVI-D 24Pin Connector (DVI) 
   HDMI Connector (HDMI)*2 
   D-SUB mini 15pin Connector (VGA)
       Audio Connector (AUDIO IN)                       
		Keyhole for Security Lock *3
        Speakers
CONTROLS AND CONNECTORS

*1 Input Select shortcut keys is available under no signal input. 

*2  
Available for ProLite E2407HDS-B1 only.   

*3 
You can fasten a security lock and cable to prevent the monitor from bein\
g removed
   

     without your permission.

NOTE
6       BEFORE YOU OPERATE THE MONITOR    


NOTE
1
2
11
12
13
*4 OptiColor Mode: Press the  
Button when the Menu is not displayed.

1
7
7
8
9
10
10
11
11
12
12
13
13
2
3
4
5
6