IBM Projector E500 User Manual

Operating range 
The remote control uses infrared transmission to control the projector. It is not 
necessary to point the remote directly at the projector, the remote will function well 
within a radius of about 10 m (33 ft) and 30° above or below the projector level. If 
the projector does not respond to the remote control, move a little closer. 
Note:   Yo u can also point the remote at the projected image. 
Projector and remote control buttons 
The projector can be operated using the remote control...

4-4 E500 Projector: User ’s Guide 

Chapter 5. On-Screen Display menu controls 
This projector has an On-Screen Display that lets you make image adjustments and 
change various settings. 
Note:   Yo u must have a display on the screen in order to access the OSD. 
Navigating the OSD 
Yo u can use the remote control or the buttons on the top of the projector to 
navigate and make changes to the OSD. The following sections show the menu 
options in the OSD. 
Setting the OSD language 
Yo u may want to reference the OSD on your projector while...

3.   
 Press the cursor up/down button to move up and down in the Quality menu. 
The following table shows the options that you will see in the Quality menu and 
the default. 
 Item Description Default 
Brightness Press the cursor left/right button to adjust the 
brightness. 
Range: 0 to 100 
50 
Contrast Press the cursor left/right button to adjust the 
contrast. 
Range: 0 to 100 
50 
Sharpness Press the cursor left/right button to adjust the 
display sharpness. 
Range: 1 to 5 
3 
Color 
Temperature...

Item Description Default 
Gamma Press the cursor left/right button to adjust the 
gamma correction of the display. 
Input Gamma Brightness 
PC   
 
 
 
 2.2 
 
 
 
 High 
MAC 
 
 
 
 1.8 
 
 
 
 High 
Video 
 
 2.4 
 
 
 
 Low 
Chart 
 
 2.2 
 
 
 
 Low 
B&W 
 
 
 
 2.4 
 
 
 
 High 
PC 
Color Space Press the cursor left/right button to adjust the 
color space. 
Range: Auto, RGB, YpbPr YCbCr 
Auto 
Cancel Resets all Quality item setting to default value N/A
 
 
 
 
Chapter 5. On-Screen Display menu...

Properties menu 
Follow the steps below to access the Properties menu. 
1.   
 Press the Menu button to open the OSD menu. 
2. 
 
 Press the cursor left/right button to move into the Properties menu. 
 
 
   
3. 
 
 Press the cursor up/down button to move up and down within the Properties 
menu. 
The following table show the options that you will see in the Properties menu and 
the default. 
 Item Description Default 
Horizontal 
Position 
Press the cursor left/right button to move the 
image left or...

Advanced Feature menu 
Follow the steps below to access the Advanced Feature menu. 
1.   
 Press the Menu button to open the OSD menu. 
2. 
 
 Press the cursor left/right button to move into the Properties menu. 
3. 
 
 Press the cursor up/down button to select Advanced Feature. 
4. 
 
 Press the Enter button to open the Advanced Feature menu. 
 
 
   
5. 
 
 Press the cursor up/down button to move up and down within the Advanced 
Feature menu. 
The following table shows the options that you will see in...

2.   
 Press the cursor left/right button to move to the Options menu. 
 
 
   
3. 
 
 Press the cursor up/down button to move up and down in the Options menu. 
The following table shows the options that you will see in the Options menu and 
the default. 
 Item Description Default 
Blank Screen Press the cursor left/right button to select a 
background color for blank screen. 
Range: Black, Red, Green, Blue, White 
Blue 
Auto Source Press the cursor left/right button to enable or 
disable automatic...

Setup menu 
Follow the steps below to access the Setup menu. 
1.   
 Press the Menu button to open the OSD menu. 
2. 
 
 Press the cursor left/right button to move to the Setup menu. 
 
 
   
3. 
 
 Press the cursor up/down button to move up and down in the Setup menu. 
The following table shows the options that you will see in the Setup menu and the 
default. 
 Item Description Default 
Video Type Press the cursor left/right button to select the video 
standard. 
Video Type is only active when the input...

Item Description Default 
Frequency Press the cursor left/right button to adjust the A/D 
sampling clock. 
Frequency is only active when the input source is 
Analog RGB. 
Range: 0 to 100 
Auto detected 
Tracking Press the cursor left/right button to adjust the A/D 
sampling number. 
Tracking is only active when the input source is 
Analog RGB. 
Range: 0 to 100 
Auto detected 
Cancel Resets Video Type, Video AGC, and Projection to 
default values. 
N/A
   
Information menu 
Follow the steps below to...