Hyundai H Tv2905pf Instruction Manual

							11 ·The lifetime of the batteries may last up to one year, depending on how often the remote control is used.   For the best performance, the
batteries should be replaced on a yearly basis, or when remote operation becomes erratic.
·Be sure to place the batteries in the correct direction.
·Do not mix old and new batteries, or different types.
·Old batteries may leak chemical and damage the remote control. Always remove batteries as soon as they become weak.
2.3 EFFECTIVELY USING THE REMOTE CONTROL
Point the remote toward the infra-red remote sensor on the main unit.
NOTE:
·If direct  sunlight, incandescent  light, or any other strong light sources hit the remote control sensor, the remote control may not operate
properly.
·If there is an obstacle between the main unit and the remote control, the remote control signal may not be received. 
						

							123.   MENU OVERVIEWMAIN MENU   SUB-MENU     SUB-MENU ENTRY
CONT50
BRIGHT   50
COLOR     50
      PICTURE     TINT        ± 00
SHARP       50
PIC.M          DYNAMIC/PERSONAL/MILD/STANDARD
B.E    ON/OFF
B.E              00
      SOUND                       BASS        ± 00
TREBLE    ± 00
BALANCE   ± 00
S.E   NATURAL/NEWS/SPACIAL/PERSONAL
B.B      ON/OFF
COLOR    AUTO/443PAL/SECAM/443NTSC/358NTSC
SOUND   BG/DK
LANGUAGE    ENGLISH / RUSSIAN
SETTING      AUTO SLEEP   ON
PRESENT    30
STORE TO              34
SURE    OK
CH ADJUST
      FEATURE    FAV.CH      FAV. CH1       1
FAV. CH2        2
CALENDAR         FAV. KGA       3
FAV. CH4   -
GAME      FAV. CH5   -
FAV. CH6   -
BIOLOGICAL CLOCK 
						

							13MAIN MENU    SUB-MENU     SUB-MENU ENTRY
CLOCK    0:13
OFF TIMER        OFF/ONCE/DAILY
0:00
      TIMER      ON TIMER         OFF/ONCE/DAILY
0:00
POSITION    0
POSITION   30
BAND    VHFL/VHFH/UHF
      PRESET      MANUAL     UP/DOWN
SKIP     ON/OFF
FINE     UP/DOWN
AUTO MEMORY
4.   TV OPERATION
4.1 BASIC OPERATION4.1.1 POWER ON
·Press POWER button on the main unit to turn on/off the TV set.
·If the standby indicator lights up, TV is in standby mode.
To turn on the TV from STANDBY mode, press STANDBY button on the remote control or the PROGRAM UP /DOWN, TV/AV button on
the front panel of the main unit.
4.1.2 POWER OFF
·Press POWER button on the main unit to turn off the TV set.
·Or press STANDBY button on the remote control to switch the TV to standby mode and the STANDBY indicator will light up.
4.1.3 SELECT MAIN MENU
·By pressing the MENU button, the main menu bar will appear on the top screen, and PICTURE menu will be highlighted
with yellow color, which means the pull down menu PICTURE is selected and its corresponding menu entries will be
displayed underneath it. 
						

							14·Then press VOLUME UP/DOWN button on the set or remote control, you can move the yellow cursor right or left for
selecting other pull-down menus in the main menu bar.
4.1.4 SELECT MENU ENTRIES·After selecting function menu, press PROGRAM UP/DOWN button to move cursor up/down to select the menu entries(e.g. The BRIGHT of picture menu is selected if it is highlighted with red color).
4.1.5 ADJUST OPTION
·Press VOLUME UP/DOWN button to adjust the data or status. E.g., The BRIGHT is adjusted to 65% as shown.
·The menu will time out and disappear from the screen when you finish, or you can press the MENU button to clear the
menu from the screen.
4.1.6 DISPLAY
·Press DISPLAY button on remote control to display the current status of the TV set, such as the current channel No. (or
AV input), the color & sound system.
·Press DISPLAY button again, current time will displayed on the top screen if you set correct time in menu entry CLOCK
of TIMER.
4.1.7 MUTE
·Press MUTE button on remote control to temporarily turn off the sound and the word MUTE as shown will appear on the
screen. Press the Mute button once again to restore the sound. Besides, press VOLUME UP button also can restore the
normal sound output.
4.2 SOUND ADJUSTMENTS4.2.1 BASS ENHANCEMENT
·Activate SOUND menu.
·Press PROGRAM UP/DOWN button to select B.E OFF (or ON).
·Press VOLUME UP/DOWN to turn B.E on or off.
·Press PROGRAM UP/DOWN button to select B.E 00.
·Press VOLUME UP to  adjust B.E 00 to  your desired level, e.g. 12, at the same time B.E will change to ON automatically
if B.E is in OFF mode.
NOTE: You can press B.E button on the remote controller directly to  turn B.E function on or off. 
						

							154.2.2 BASS, TREBLE, BALANCE
·Activate SOUND menu.
·Press PROGRAM UP/DOWN button to select BASS.
·Press VOLUME UP/DOWN to adjust for your favorable sound, e.g., adjust BASS to +30.
·The same adjusting procedure is applicable to treble and balance.
BASS: Decrease the low frequency (bass) by adjusting toward -50, increase the low frequency (bass) by adjusting toward +50.
TREBLE: Decrease the high frequency (treble) by adjusting toward -50,increase the high frequency (treble) by adjusting toward
+50.
BALANCE: Adjust the sound source position from left speaker to center to right speaker as balance is adjusted from L(-50) to
R(+50).
4.2.3 SOUND EFFECT
·Activate SOUND menu.
·Press PROGRAM UP/DOWN button to select S.E.
·Press VOLUME UP/DOWN to adjust to your desired setting.
NATURAL NEWS SPACIALPERSONAL4.2.4 SURROUND SOUND
·Press SURROUND button on the remote controller to adjust to your desired setting:
·SURROUND OFFSIMULATED SURROUND 1SURROUND 2
4.3 CHANNEL PRESETPlease preset all the active channels in your area to the TV set before you enjoy with the TV programs.
4.3.1 AUTO SEARCH
All the active channels will be stored automatically from channel No. 1 and upward in order.
·Activate PRESET menu.
·Press the PROGRAM DOWN button to select AUTO MEMORY. 
						

							16 ·Press the OK button to start the auto searching, and then all available channels will be stored from No.1 and upward in order. Auto-searching
will stop after all the frequency bands are searched, and the program of the first searched, channel 1, will show. If you want to exit auto search,
just pressing the VOLUME DOWN button.
·The menu will time out and disappear from the screen when you finish, or you can press the MENU button to clear the menu from the screen.
4.3.2 MANUAL SEARCH
To preset the TV channel to your desired position number, manual searching should be used.
·Activate PRESET menu.
·Press the PROGRAM UP/DOWN button to select POSITION, then press the VOLUME UP/DOWN button to select the
program No., e.g. 30.
·Press the PROGRAM UP/DOWN button to select BAND, then press the VOLUME UP/DOWN button to select the
frequency band among VHFL/ VHFH/UHF.
·Press the PROGRAM UP/DOWN button to select MANUAL, then press the VOLUME UP/DOWN button to start the
channel searching upward or downward from the current position of this channel and current frequency band.
Note:
·If the searched channel is not as your desired, you can simply restart the searching upward or downward by pressing the
VOLUME UP/DOWN button.
·To stop manual searching, press the VOLUME DOWN button when searching upward, or press VOLUME UP button
when searching downward.
·The menu will time out and disappear from the screen when you finish, or you can press the MENU button to clear the
menu from the screen.
4.3.3 FINE TUNE
Fine tuning function may improve the receiving quality for some weak /unstable Channels by adjusting the channel frequency
manually.
·Select your desired TV channel by digit keys or PROGRAM UP/DOWN buttons.
·Activate PRESET menu.
·Press the PROGRAM UP/DOWN button to select FINE, then press the VOLUME UP/DOWN button to fine tune the
channel upward or downward until satisfied picture and sound quality are achieved.
·The menu will time out and disappear from the screen when you finish, or you can press the MENU button to clear the
menu from the screen.
NOTE: SIMULATED is used when a mono broadcast is received. SURROUND 1 and SURROUND 2 are used when a stereo broadcast is received. 
						

							17 4.3.4 CHANNEL ADJUSTMENT
·After the auto or manual search, you may want to rearrange the program numbers in which the channels are stored,
channel adjustment function may be useful to you.
·Activate FEATURE menu.
·Press the PROGRAM UP/DOWN button to select CH. ADJUST.
·Press the OK button to display CH ADJUST menu entries as shown.
·Press the PROGRAM UP/ DOWN button to select PRESENT, then press the VOLUME UP/DOWN button to select the
program number you want to change, e.g. 30.
·Press the PROGRAM UP/DOWN button to select STORE TO, then press the VOLUME UP/DOWN button to select the
program No. to be replaced, e.g. 22, that means to replace channel 22 by 30.
·Then press the PROGRAM UP/DOWN button to select sure and press the OK button to confirm the setting.
·If you want to  set other channel, follow the above procedure.
·The menu will time out and disappear from the screen when you finish, or you can press the MENU button to clear the
menu from the screen.
4.3.5 PROGRAM SKIP
After the auto search, some fault stations may be memorized because the TV station broadcasts with different frequencies for
your and your neighborhood regions. These additional stations are weak and should be removed from channel memory.
·Activate PRESET menu.
·Press the PROGRAM UP/ DOWN button to select  POSITION, then press the VOLUME UP/DOWN button to select the
channel No. you want to skip, e.g. 18.
·Press the PROGRAM UP/DOWN button to select SKIP.
·Press the VOLUME UP button to select ON to confirm. If you do not want to skip this channel, or want to find out
skipped channel, just press the VOLUME DOWN button to select OFF.
·If you want to skip other channel, follow the above procedure.
·The menu will time out and disappear from the screen when you finish, or you can press the MENU button to clear the
menu from the screen.
4.3.6 FAVORITE CHANNEL SETTING
You can store six favorite channels in memory and preview those channels by FAVORITE button.
·Activate FEATURE menu.
·Press the PROGRAM UP/DOWN button to select FAV.CH.
·Press the OK button to display FAV.CH. menu entries as shown. 
						

							18·Press the PROGRAM UP/DOWN button to select FAV. CH3, then press the VOLUME UP/DOWN button to select
program number you want to  store into  this position, such as 08.
·Repeat the above procedure to set other five favorite channels.
·You can delete the undesired channel No. with the DELETE button and reset another favorite channel No.
·The menu will time out and disappear from the screen when you finish, or you can press the MENU button to clear the menu from the screen.
4.4 RECEIVING SYSTEM SELECTIONThis unit is a multi-system TV. System selection function allows you to select suitable receiving system for the specific broadcasting system in your
area. This unit has the capability of auto-identification on color system. Normally, we strongly recommend you to select the auto-identification mode.
4.4.1 SYSTEM  SETTING
EXAMPLE: color system selection
·Activate FEATURE menu shown as Fig(1).
·Press PROGRAM UP/ DOWN button to  select SETTING.
·Press OK button to enter SETTING submenu display shown as Fig(2).
·Press PROGRAM UP/DOWN button to  COLOR item, then press VOLUME UP button to cyclically select the color
system as AUTO, 443PAL, SECAM, 443NTSC and 358NTSC.
·Press menu button twice to exit menu operation.
Note:
·B.B  (BLUE BACKGROUND):when no signal is received, the picture will become blue when B.B is selected ON.
·COLOR SYSTEM:the normal selection of color system is AUTO mode in which the TV set will select the system
to match the receiving system. Manual selection can also be made by pressing VOLUME UP/DOWN button while
the indicator is pointing to  color option.
·SOUND SYSTEM:the selection of sound system is depended on the local broadcasting system.
·LANGUAGE:this television can display the menu in two languages: English, Russian.
·AUTO SLEEP ON(OFF): If you select AUTO SLEEP to ON mode, it will
·turn the TV to  standby mode automatically after 2 hours without any operation on the TV set. 
						

							19 4.5 OPERATION OF WATCHING TELEVISION4.5.1 SELECTING CHANNELS
·Press PROGRAM UP/DOWN button to change the channel ascendingly / descendingly;
·Use the digit keys on the remote control directly to select the channel.
4.5.2 PICTURE  ADJUSTMENT
Adjust the level of CONTRAST, BRIGHTNESS, COLOR, SHARPNESS, and TINT to get the most favorable picture
·Activate the PICTURE menu.
·Press PROGRAM UP/DOWN button to select your desired menu entry, e.g. CONT.
·Press VOLUME UP/DOWN button to adjust the picture until you are satisfied, and the CONTRAST setting will be automatically stored in the
memory of the TV set. The same adjustment procedure is applicable to brightness, sharpness, color setting.
Note:
·CONT:  Adjust for black to white ratio of the picture.
·BRIGHT:  Adjust for picture background level, i.e. the total brightness of picture.
·COLOR:  The saturation of color, i.e. the stronger or weaker color of picture.
·SHARP:  Adjust for details level of picture.
·TINT:   Adjust for color tune only when watching NTSC picture.
4.6 TIMER FUNCTIONTimer function is provided by the microcomputer of TV set. Once it is set, the ON/OFF time and time displaying functions can start functioning. The
TV set will keep the correct time as long as the main power is on, even if the TV has been turned off into standby mode.
4.6.1 CURRENT TIME SETTING
·Activate TIMER menu.
·Press the PROGRAM UP/DOWN button to select CLOCK.
·Press the VOLUME UP/DOWN button to set the current time, e.g. 12:15.
4.6.2 ON TIMER
To turn on the TV everyday on specified time with your desired channel, on timer function provide a convenient way to do it.
·Activate TIMER menu.
·Press the PROGRAM UP/ DOWN button to select ON TIMER. 
						

							20 ·Press the VOLUME UP/DOWN button to select among OFF, ONCE, DAILY.
·If you select DAILY or ONCE, press PROGRAM DOWN button to 0:00,then press the VOLUME UP/DOWN button to set the ON time, e.g.
22:59.
·Press PROGRAM DOWN button to select POSITION, then Press VOLUME UP/DOWN button to select your desired channel No., e.g. 11.
NOTES:
OFF: The On Timer is set to off and will not operate.
DAILY: The timer is set to turn on the TV at that time everyday until otherwise adjusted.
ONCE: The timer is set to turn on the TV only one time.
POSITION: This is the channel the TV will display at On time.
4.6.3 OFF TIMER
·To turn off the TV set on specified time, off timer function will be useful to you. Activate TIMER menu.
·Press PROGRAM UP/DOWN button to the menu entry OFF TIMER.
·Press VOLUME UP/DOWN button select among ONCE, DAILY, OFF.
·If you  select DAILY or ONCE, press PROGRAM DOWN button to 0:00, then press VOLUME UP/DOWN button to set
the OFF time, e.g. 22:50.
·Press menu button to  exit menu operation.
NOTES:
OFF: The Off Timer is set to off and will not operate.
DAILY: The timer is set to turn off the TV at that time everyday until otherwise adjusted.
ONCE: The timer is set to turn off the TV only one time.
4.7 TV/AVPress TV/AV button repeatedly to select the TV signal source or AV signal sources.
This TV set has a composite video input, one S-Video input. If your AV equipment has S-VIDEO output, please input through
the S-VIDEO of TV to  get the better picture quality.
NOTE:
To prevent cross talk interference, do not  simultaneously input AV signals from
two (or above) different AV terminals.