Hyundai H Tv2115spf Instruction Manual

							COLOUR TV
Руководство по эксплуатации 
Instruction manual
H-TV2115SPF
ТЕЛЕВИЗОР
ЦВЕТНОГО ИЗОБРАЖЕНИЯ
 
						

							Table of contents 
Before you start 
Utilization of the product 
Important safeguards
Connection
Operation
Control elements Remote controller
 Changing the battery
 Front panel
Button functions
OSD operation Picture setting
Sound setting
System setting
 Installation
General information
Troubleshooting Causes of interference
Accessories
Specifications
2 3
Table of contentsBefore you start
Dear customer!Thank you for purchasing our product. For safety, it is strongly recommended to read 
this manual carefully before connecting, operating and/or adjusting the product and keep 
the manual for reference in the future.
2
3
3
3
4
5
5
5
5
5
6
6
6
7
7
7
9
9
9
10
10
Downloaded From TV-Manual.com Manual” 
						

							23
Table of contentsBefore you start
If you want to dispose this product, do not mix it with general household waste. There is 
a separate collection system for used electronic products in accordance with legislation 
that requires proper treatment, recovery and recycling. Please contact your local authorities for the correct method of disposal. By doing so, 
you will ensure that your disposed product undergoes the necessar y treatment, recovery 
and recycling and thus prevent potential negative effects on the environment and human 
health.
Utilization of the product
Important safeguards
•  All instructions must be read and 
understood well before you operate the unit. 
Heed all warnings and follow all instructions.
•  Before connecting the AC power cord to 
the current mains outlet, make sure that the 
voltage designation of the unit corresponds to 
the local electrical supply. •  Please unplug the power cord from the AC 
outlet and contact a service center for repair 
if following occurs: any obvious abnormality 
appears in the unit, such as smoky, peculiar 
smell or strange sound; liquid has been spilled or 
other objects have fallen into the unit; no picture 
or sound; cover or panel is broken; although you 
have operated the unit following the operating 
instructions, it still cannot work normally. •  This unit should only be connected to a 
wall socket having grounding. •  Always disconnect the power cord and 
antenna during a storm. •  Do not fix the power cord with metal nails.
•  Unplug the power cord from the AC outlet; 
also unplug the signal cables from the input 
ports when the unit is unused for long periods 
of time. •  When unplugging the plug, always hold the 
wide slot, do not touch the metal part, and do 
not destroy, refit, twist or pull the power cord. •  Please contact the service center  immediately if you found that the core is 
showed in the air or has been broken.
•  Please replace the AC outlet if the metal 
bolt cannot be inserted into the power socket 
completely or it cannot be fastened even when 
it was pushed in, otherwise, any accidents of 
shocks and fires would happen. •  Never touch the antenna lie or power plug 
if it stars to thunder. •  Do not touch the power plug with wet 
hands. •  Do not use any non-rated power socket 
with numerous devices jointed on one power 
socket or cable device. The wire of non-
designated capacity may cause the fire due to 
the generation of heat. •  Please use the accessories provided 
by the manufacturer. Using inadequate 
accessories may result in accidents. •  Please adjust the product through the 
panel buttons or the remote controller •  Do not remove the cover or attempt to 
service the unit by yourself. Do not disassemble 
back cover and do not make maintenance by 
yourself to avoid the electric shock. •  Overpressing the panel may destroy the 
product. •  Do not place the product on an unstable 
cart, stand surface, tripod, bracket, or table. 
The product may fall, causing serious accidents 
as well as the damage to the product.  •  Please place the product on a flat surface 
Downloaded From TV-Manual.com Manual” 
						

							4
Before you start
in a well-ventilated location. Keep it away from 
the burning-light, direct sunlight, vibration, 
high-temperature and humidity. •  Do not place any vase, potted plant, cup, 
medicine and any container with water on this 
product. If the liquid is spilt, it may cause the 
fire, electric shock or breakdown. •  Do not install it at the place on the strong 
magnetic field or current field. It may cause 
break down. This equipment may be observed 
deterioration of the picture by electromagnetic 
radiation in electromagnetic environment. •  Fasten the wheel of the product or shelf 
with wheels when installing this product. If it 
moves or is tipped over, it may be damaged. •  Do not place any fire source such as 
candlelight close to this product or place it on 
this product. If it is tipped over or fallen down, it 
may cause damage or fire. •  Do not place the unit into closed space 
of TV for better ventilation; it can reduce the 
product lifetime. Keep a space at list 10 cm at 
above, left, and right of the TV. •  Please place all the signal cords behind of 
rear panel. •  Do not transport it with the power cord 
or the connection cable connected. If you 
move this product with the power cord or the 
connection cable connected, the damaged 
power cord, connection cable or connection 
terminal may cause the fire, the electric shock 
or breakdown. •  The temperature of the product’s body 
becomes a little higher after a long period use. 
This phenomenon indicates that heat exchange 
in normal working mode, thus please do not 
let children or anyone who is sensitive of 
temperature to touch.
All images provided herein are schematic 
drawings of real objects and may differ 
from their real images.Connection
•  To get the TV signal, connect a CATV or 
outdoor antenna to the Antenna jack of this unit. •  Connect an external device (e.g., VCR-/
DVD-recorder) to the proper Audio/Video 
output jacks of this unit with AV RCA cable. •  Connect an external audio-video signal 
source to the proper Audio/Video input jacks of 
this unit with AV RCA cable. •  Insert the plug of the power cord to current 
supply mains.
Downloaded From TV-Manual.com Manual” 
						

							5
Operation
Control elements    
Remote controller
1.  STANDBY button
2.  Number buttons
3.  TV/AV button
4.  RECALL button
5.  MENU button
6.  OK button
7.  VOL
/VOL buttons
8.  SLEEP button
9.  P.EFFECT button
10. MUTE button 
11. DISPLAY button
12. FAV button
13. CH
/CH buttons
14. AT button
15. F3 button
16. F2 button
  Buttons not indicated in the diagram 
above are not functional for this model.
Changing the battery•  Remove the battery compartment cover on 
the back of the RC. Insert 2 AAA batteries into 
the battery compartment observing the correct 
polarity. Install the cover back. •  The RC should be pointed at remote 
sensor within 8 meters and within 30 degrees 
at the left or the right side. •  Take the battery out of the RC if it is not 
used for a long time. •  Do not mix new and used batteries or 
different types of batteries. Weak batteries can 
leak and severely damage the RC. •  Do not expose the RC to shock, liquids, 
and do not place it in an area with high humidity.
 Front panel
1. TV/AV button
2. MENU button
3. VOL
/VOL buttons
4. PRO./PRO. buttons (function as CH/
CH buttons of the RC)
5. IR remote sensor
6. Standby indicator
7. POWER button
1
2
3
4
5
6
7
8
9 10
11
12
13
14
15
16
1
2 3 4 56 7
Downloaded From TV-Manual.com Manual” 
						

							6
Operation
Button functions
•  Press POWER button on the unit or 
STANDBY button on the RC to switch on the 
power. Press the button again to switch off 
the power. When the unit is in standby mode, 
the standby indicator lights up; you can press 
STANDBY button, CH
/CH buttons or any 
number button on the RC to switch the TV from 
the stanby mode. •  Press VOL
/VOL buttons repeatedly to 
decrease or increase the sound volume. •  Press SLEEP button repeatedly to set 
the sleep time (from 10 to 120 min). When the 
sleep time is set, you can press this button to 
see the remaining time before the TV switches 
off. To cancel sleep function, press SLEEP 
time until OFF is selected. •  Press RECALL button on the RC to select 
from the present channel and the previously 
displayed channel. •  Press DISPLAY button to display the 
information window. Press again to cancel. •  Press P.EFFECT button repeatedly to cycle 
through the available video picture modes: 
Dynamic => Standard => Mild => Personal. •  Press FAV button to view the Favorite 
channel list. •  Press AT button to disable the picture 
(the screen will be black) and make the audio 
available only. To cancel this function, press 
AT, MENU or OK button. •  Press MUTE button to cut off sound, press 
this button again or press VOL
 button to 
resume the sound. •  Press F3 button to enter or exit game 
mode. The button functions in the game mode 
are following: VOL
/VOL buttons - start the 
mission/push box leftward or rightward; CH
/CH buttons - select a mission/push boxes 
upward/downward; RECALL button - restart 
the mission; OK button - undo previous step. •  Press F2 button to enable the calendar. 
In the calendar mode, press VOL
/VOL 
buttons to select month and press CH/CH 
buttons to select year (1950 - 2048). •  Press TV/AV button repeatedly to select a 
signal source. •  Press CH
/CH buttons to select 
previous or next channels; or press number 
buttons to enter a channel number directly.
OSD operation
Press MENU button to access the menu or 
return to the previous menu. Press CH/CH buttons to go to the needed item, then use 
VOL button or OK button to confirm your 
selection. Press VOL/VOL cursor buttons 
to adjust the selected item. Use number 
buttons to input numbers. After setting press DISPLAY button to return 
to exit menu setting.
Picture setting
Picture
Brightness
Contrast
Colour
Sharpness
Tint
White tone
Zoom
•  Brightness, Contrast, Colour, 
Sharpness, Tint, White tone: adjust 
corresponding parameters of the image. •  Zoom: adjust the screen format.
Downloaded From TV-Manual.com Manual” 
						

							7
Operation
Sound setting
Sound
Volume
Balance
•  Volume, Balance (adjust output between 
left and right speakers).
System setting
System
Colour sys.
Sound sys.
Language
Child lock
Favorite list
•  Colour system, Sound system, 
Language: select the needed option from the 
available list. •  Child lock: select ON to lock all buttons 
on the panel (except POWER button). Set OFF 
to unlock the buttons. •  Favorite list: 
Favorite list
Favorite Ch. 1
Favorite Ch. 2
Favorite Ch. 3
Favorite Ch. 4
Favorite Ch. 5
Favorite Ch. 6 Create the list of your 6 programs; select a 
position and press number buttons to input a 
program. You can review the Favorite list by 
pressing FAV button.
Installation
Installation
Program No.
Autostore
Manual store
Fine
Prog. swap
Skip
•  Program number: select a number 
program.  •  Autostore: 
Autostore
Program No.
Fre. Band
Frequency
Search
Program No.: current program number is 
displayed. Frequency band: current band is displayed.
Frequency: current frequency is displayed.
Search: select this item and press OK button 
or VOL
 button to start automatic search. To 
stop searching, press MENU or DISPLAY button. 
Autostore can also be activated by pressing and 
holding MENU button on the front panel.
•  Manual store: select the desired program 
number and band. Select «Search» and press 
VOL
/VOL buttons to start the search.
Downloaded From TV-Manual.com Manual” 
						

							89
OperationGeneral information
•  Fine: adjust the frequency manually. 
Select the desired program number, then press 
repeatedly VOL
/VOL buttons to adjust the 
frequency step by step.  •  Program swap: swap numbers of 2 
channels.
Prog. swap
Current prog.
Aim to
Check
Current program: select the program number 
to be substituted. Aim to: select the new program number. 
Press OK button or VOL
 button to confirm 
the exchange.
•  Skip: Select a program number in «Program 
No.», then set «Skip» item to ON. Now, when 
you switch programs with CH
/CH buttons, 
this program will be skipped (thus, can only 
be selected with number buttons). To cancel 
skipping, set “SKIP” to OFF for this program.
  In this manual, the OSD Menu maybe 
changed and different from your real TV’s 
screen shown without further notice. This 
manual is just a sample to help you how to 
operate TV menu setting.
Downloaded From TV-Manual.com Manual” 
						

							89
OperationGeneral information
Troubleshooting
Below is a table describing simple measures that can help you eliminate most problems likely 
to emerge when this unit is in use. If below measures do not help, turn to a service center or to the 
nearest dealer.
Symptom Cause Solution
No picture, no 
sound, and no 
indicator light The power cord is not plugged in.
Contrast, brightness, sharpness, color 
and volume are all in the minimum 
value or TV is in mute mode. Plug the power cord in.
Alter the value of contrast, 
brightness, sharpness, color and 
volume.
Picture and 
sound with 
abnormity Contrast and color are set improperly.
Color system is set improperly.
Sound system is set improperly. Set the value of Contrast and color 
properly.
Set the sound system properly.
Picture is spotted 
or with snow Signal source is low-grade or the 
signal is in a lower quality. Use the qualified signal cord.
Blue background No video signal or the signal cord is 
improperly/not connected. Connect the signal cord properly.
No sound No audio signal or the signal cord is 
improperly/not connected. Connect the audio signal cord 
properly.
Set the sound system properly.
The RC does not 
work Batteries are improperly installed or 
exhausted. Make sure the positive and the 
negative polarities are correct.
Reattach the battery lid.
Replace the batteries.
Causes of interferenceIncorporated in your TV receiver are the most up-to-date devices to eliminate interference. 
Local radiation however, can create disturbances, which visibly af fect your picture. Proper 
installations, a good aerial are your best safeguards against these disturbances. •  RF INTERFERENCE: Moving ripples across the screen are caused by nearby transmit ting or 
receiving short-wave radio equipment. •  DIATHERMY: Herringbone pattern and partial picture loss can result from the operation of 
diathermy equipment from a nearby doctor’s surgery or hospital. •  SNOW: Weak TV signals from long distant stations result in an instead picture and give the 
effect of falling snow. An antenna adjustment or antenna amplifier may be needed. •  GHOST: Multiple image, caused by TV signals reflected back from surrounding buildings, 
hills, aircraft, etc. is minimized by correct aerial positioning. •  CAR IGNITION: Nearby cars and electrical motors can cause small streaks across the picture 
or make the picture roll.
Downloaded From TV-Manual.com Manual” 
						

							10
General information
Accessories
1.  Colour TV     1 pc
2.  Remote controller    1 pc 
3.  Consumer information    1 pc
4.  Warranty card      1 pc
5.  Instruction manual    1 pc
Specifications
S
ize (diagonal)        21” (53 cm)
Color system        PAL, SECAM
Sound system        DK, I, BG, L
AV RCA in        +
AV RCA out        +
Russian and English OSD      +
Sleep timer        +
Quantity of channels      255
Calendar        +
Game          +
Power supply        ~110-240 V
Unit dimensions        657 x 468 x 532 mm
Net/Gross weight       20 kg/22 kg
Warning: Specifications may be subject to change without notice for improvement.
Downloaded From TV-Manual.com Manual”