Hyundai H Tv2105pf Instruction Manual

							11MAIN MENU    SUB-MENU     SUB-MENU ENTRY
CLOCK    0:13
OFF TIMER        OFF/ONCE/DAILY
0:00
      TIMER      ON TIMER         OFF/ONCE/DAILY
0:00
POSITION    0
POSITION   30
BAND    VHFL/VHFH/UHF
      PRESET      MANUAL     UP/DOWN
SKIP     ON/OFF
FINE     UP/DOWN
AUTO MEMORY
4.   TV OPERATION
4.1 BASIC OPERATION4.1.1 POWER ON
·Press POWER button on the main unit to turn on/off the TV set.
·If the standby indicator lights up, TV is in standby mode.
To turn on the TV from STANDBY mode, press STANDBY button on the remote control or the PROGRAM UP /DOWN or  TV/AV button on
the front panel of the main unit.
4.1.2 POWER OFF
·Press POWER button on the main unit to turn off the TV set.
·Or press STANDBY button on the remote control to switch the TV to standby mode and the STANDBY indicator will light up.
4.1.3 SELECT MAIN MENU
·By pressing the MENU button, the main menu bar will appear on the top screen, and PICTURE menu will be highlighted
with yellow color, which means the pull down menu PICTURE is selected and its corresponding menu entries will be
displayed underneath it. 
						

							12 ·Then press VOLUME UP/DOWN button on the set or remote control, you can move the yellow cursor right or left for
selecting other pull-down menus in the main menu bar.
4.1.4 SELECT MENU ENTRIES·After selecting function menu, press PROGRAM UP/DOWN button to move cursor up/down to select the menu entries(e.g. The BRIGHT of picture menu is selected if it is highlighted with red color).
4.1.5 ADJUST OPTION
·Press VOLUME UP/DOWN button to adjust the data or status. E.g., The BRIGHT is adjusted to 65% as shown.
·The menu will time out and disappear from the screen when you fin ish, or you can press the MENU button to clear the
menu from the screen.
4.1.6 DISPLAY
·Press DISPLAY button on remote control to display the current status of the TV set, such as the current channel No. (or
AV input), the color & sound system.
·Press DISPLAY button again, current time will displayed on the top screen if you set correct time in menu entry CLOCK
of TIMER.
4.1.7 MUTE
·Press MUTE button on remote control to temporarily turn off the sound and the word MUTE will appear on the screen.
Press the Mute button once again to restore the sound. Besides, press VOLUME UP button also can restore the normal
sound  output.
4.2 CHANNEL PRESETPlease preset all the active channels in your area to the TV set before you enjoy with the TV programs.
4.2.1 AUTO SEARCH
All the active channels will be stored automatically from channel No. 1 and upward in order.
·Activate PRESET menu.
·Press the PROGRAM DOWN button to select AUTO MEMORY.
·Press the OK button to start the auto searching, and then all available channels will be stored from No.1 and upward in
order. Auto-searching will stop after all the frequency bands are searched, and the program of the first searched, channel 1,
will show. If you want to exit auto search, just pressing the VOLUME DOWN button. 
						

							13 ·The menu will time out and disappear from the screen when you finish, or you can press the MENU button to clear the menu from the screen.
4.2.2 MANUAL SEARCH
To preset the TV channel to your desired position number, manual searching should be used.
·Activate PRESET menu.
·Press the PROGRAM UP/DOWN button to select POSITION, then press the VOLUME UP/DOWN button to select the
program No., e.g. 30.
·Press the PROGRAM UP/DOWN button to select BAND, then press the VOLUME UP/DOWN button to select the
frequency band among VHFL/ VHFH/UHF.
·Press the PROGRAM UP/DOWN button to select MANUAL, then press the VOLUME UP/DOWN button to start the
channel searching upward or downward from the current position of this channel and current frequency band.
Note:
·If the searched channel is not as your desired, you can simply restart the searching upward or downward by pressing the
VOLUME UP/DOWN button.
·To stop manual searching, press the VOLUME DOWN button when searching upward, or press VOLUME UP button
when searching downward.
·The menu will time out and disappear from the screen when you finish, or you can press the MENU button to clear the
menu from the screen.
4.2.3 FINE TUNE
Fine tuning function may improve the receiving quality for some weak /unstable Channels by adjusting the channel frequency
manually.
·Select your desired TV channel by digit keys or PROGRAM UP/DOWN buttons.
·Activate PRESET menu.
·Press the PROGRAM UP/DOWN button to select FINE, then press the VOLUME UP/DOWN button to fine tune the
channel upward or downward until satisfied picture and sound quality are achieved.
·The menu will time out and disappear from the screen when you finish, or you can press the MENU button to clear the
menu from the screen.
4.2.4 PROGRAM SWAP
·After the auto or manual search, you may want to rearrange the program numbers in which the channels are stored,
channel adjustment function may be useful to you.
·Activate FEATURE menu.
·Press the PROGRAM UP/DOWN button to select CH. ADJUST. 
						

							14 ·Press the OK button to display CH ADJUST menu entries as shown.
·Press the PROGRAM UP/ DOWN button to select PRESENT, then press the VOLUME UP/DOWN button to select the
program number you want to change, e.g. 30.
·Press the PROGRAM UP/DOWN button to select STORE TO, then press the VOLUME UP/DOWN button to select the
program No. to be replaced, e.g. 22, that means to replace channel 22 by 30.
·Then press the PROGRAM UP/DOWN button to select sure and press the OK button to confirm the setting.
·If you want to  set other channel, follow the above procedure.
·The menu will time out and disappear from the screen when you finish, or you can press the MENU button to clear the
menu from the screen.
4.2.5 PROGRAM SKIP
After the auto search, some fault stations may be memorized because the TV station broadcasts with different frequencies for
your and your neighborhood regions. These additional stations are weak and should be removed from channel memory.
·Activate PRESET menu.
·Press the PROGRAM UP/ DOWN button to select  POSITION, then press the VOLUME UP/DOWN button to select the
channel No. you want to skip, e.g. 18.
·Press the PROGRAM UP/DOWN button to select SKIP.
·Press the VOLUME UP button to select ON to confirm. If you do not want to skip this channel, or want to find out
skipped channel, just press the VOLUME DOWN button to select OFF.
·If you want to skip other channel, follow the above procedure.
·The menu will time out and disappear from the screen when you finish, or you can press the MENU button to clear the
menu from the screen.
4.2.6 FAVORITE CHANNEL SETTING
You can store six favorite channels in memory and preview those channels by FAVORITE button.
·Activate FEATURE menu.
·Press the PROGRAM UP/DOWN button to select FAV.CH.
·Press the OK button to display FAV.CH. menu entries as shown.
·Press the PROGRAM UP/DOWN button to select FAV. CH3, then press the VOLUME UP/DOWN button to select
program number you want to  store into  this position, such as 08.
·Repeat the above procedure to set other five favorite channels.
·You can delete the undesired channel No. with the DELETE button and reset another favorite channel No.
·The menu will time out and disappear from the screen when you finish, or you can press the MENU button to clear the menu from the screen. 
						

							15 4.3 RECEIVING SYSTEM SELECTIONThis unit is a multi-system TV. System selection function allows you to select suitable receiving system for the specific broadcasting system in your
area. This unit has the capability of auto-identification on color system. Normally, we strongly recommend you to select the auto-identification mode.
4.3.1 SYSTEM  SETTING
EXAMPLE: color system selection
·Activate FEATURE menu shown as Fig(1).
·Press PROGRAM UP/ DOWN button to select SETTING.          (1)
·Press OK button to enter SETTING submenu display shown as Fig(2).
·Press PROGRAM UP/DOWN button to  COLOR item, then press VOLUME UP button to cyclically select the color
system as AUTO, 443PAL, SECAM, 443NTSC and 358NTSC.
·Press menu button twice to exit menu operation.
Note:                  (2)
·B.B  (BLUE BACKGROUND):when no signal is received, the picture will become blue when B.B is selected ON.
·COLOR SYSTEM:the normal selection of color system is AUTO mode in which the TV set will select the system
to match the receiving system. Manual selection can also be made by pressing VOLUME UP/DOWN button while
the indicator is pointing to  color option.
·SOUND SYSTEM:the selection of sound system is depended on the local broadcasting system.
·LANGUAGE:this television can display the menu in two languages: English, Russian. 
						

							16 4.4 OPERATION OF WATCHING TELEVISION4.4.1 SELECTING CHANNELS
·Press PROGRAM UP/DOWN button to change the channel ascendingly / descendingly;
·Use the digit keys on the remote control directly to select the channel.
4.4.2 PICTURE  ADJUSTMENT
Adjust the level of CONTRAST, BRIGHTNESS, COLOR, SHARPNESS, and TINT* to get the most favorable picture
·Activate the PICTURE menu.
·Press PROGRAM UP/DOWN button to select your desired menu entry, e.g. CONT.
·Press VOLUME UP/DOWN button to adjust the picture until you are satisfied, and the CONTRAST setting will be automatically stored in the
memory of the TV set. The same adjustment procedure is applicable to brightness, sharpness, color setting.
Note:
·CONT:  Adjust for black to white ratio of the picture.
·BRIGHT:  Adjust for picture background level, i.e. the total brightness of picture.
·COLOR:  The saturation of color, i.e. the stronger or weaker color of picture.
·SHARP:  Adjust for details level of picture.
·TINT*:  Adjust for color tune only when watching NTSC picture.
4.5 TIMER FUNCTIONTimer function is provided by the microcomputer of TV set. Once it is set, the ON/OFF time and time displaying functions can start functioning. The
TV set will keep the correct time as long as the main power is on, even if the TV has been turned off into standby mode.
4.5.1 CURRENT TIME SETTING
·Activate TIMER menu.
·Press the PROGRAM UP/DOWN button to select CLOCK.
·Press the VOLUME UP/DOWN button to set the current time, e.g. 12:15.
4.5.2 ON TIMER
To turn on the TV everyday on specified time with your desired channel, on timer function provide a convenient way to do it.
·Activate TIMER menu.
·Press the PROGRAM UP/ DOWN button to select ON TIMER. 
						

							17 ·Press the VOLUME UP/DOWN button to select among OFF, ONCE, DAILY.
·If you select DAILY or ONCE, press PROGRAM DOWN button to 0:00, then press the VOLUME UP/DOWN
button to set the ON time, e.g. 22:59.
·Press PROGRAM DOWN button to select POSITION, then Press VOLUME UP/DOWN button to select your desired
channel No., e.g. 11.
NOTES:
OFF: The On Timer is set to off and will not operate.
DAILY: The timer is set to turn on the TV at that time everyday until otherwise
adjusted.
ONCE: The timer is set to turn on the TV only one time. POSITION: This is the channel the TV will display at On time.
POSITION: This is the channel the TV will display at On time.
4.5.3 OFF TIMER
·To turn off the TV set on specified time, off timer function will be useful to you. Activate TIMER menu.
·Press PROGRAM UP/DOWN button to the menu entry OFF TIMER.
·Press VOLUME UP/DOWN button select among ONCE, DAILY, OFF.
·If you  select DAILY or ONCE, press PROGRAM DOWN button to 0:00, then press VOLUME UP/DOWN button to set
the OFF time, e.g. 22:50.
·Press menu button to  exit menu operation.
NOTES:
OFF: The Off Timer is set to off and will not operate.
DAILY: The timer is set to turn off the TV at that time everyday until otherwise
adjusted. ONCE: The timer is set to turn off the TV only one time.
4.6 TV/AVPress TV/AV button repeatedly to select the TV signal source or AV signal sources.
This TV set has two composite video input. 
						

							18 4.7 PICTURE MODE SELECTIONThere are four choices for picture modes. Picture mode can be set by user according to his personal preference.
²SHORT-CUT OPERATION
Press the PICTURE button on the remote control, the current picture mode will display on the screen, for example, the
STANDARD picture mode. Press this button repeatedly, you can select the desired picture modes among STANDARD, MILD,
DYNAMIC and PERSONAL.
²MENU OPERATION
·Activate PICTURE menu.
·Press the PROGRAM UP/DOWN button to select menu entry PIC.M.
·Press the VOLUME UP/DOWN button to  cyclically to select picture setting level among STANDARD, MILD,
DYNAMIC and PERSONAL.
·Then menu will time out and disappear from the screen when you finish, or you can press the MENU button to clear the
menu from the screen.
5.   ADVANCED FUNCTIONS
5.1 GAME FUNCTIONThis TV is built-in a game for enjoying in your leisure time.
²SHORT-CUT OPERATION
Press GAME button on the remote control to  enter or exit the game directly.
²MENU OPERATION
·Activate FEATURE menu.
·Press the PROGRAM UP/DOWN button to select GAME.
·Press the OK button to enter game.
² How to play game
·After entering the game, press the VOLUME UP/DOWN button to select the level from 1 to 20.
·Press the OK button to start the game.
·When playing, press the PROGRAM/VOLUME UP/DOWN buttons to control the moving direction of the CHILD to
push the bho in th `, and the box will turn into an apple. 
						

							19 ·After having pushing all the box into @ , and all the boxes change into apples as shown, you win the game for this level,
it will enter next higher level automatically. If you finish the game of level 20, it will return to level 1 again.
NOTES:
·Playing the game for the first time, only level 1 can be selected and played.
·Only when you win the game of one level, you can enter the next higher level, and pressing the VOLUME UP/DOWN
button can select from 1 to the level next higher than that you have passed. For example, If you have passed level11,
pressing VOLUME UP/DOWN button can select from 1 to 12, and the higher Levels(13-20) above 12 can not be
selected.
5.2 CALENDARCalendar function enables you to look up days and years very conveniently.
²SHORT-CUT OPERATION
·Press the CALENDAR button on the remote control to enter the calendar display directly.
·Press the VOLUME UP/DOWN button to select your desired month;
·Press the PROGRAM UP/DOWN to select your desired year.
·Press the CALENDAR button again to exit the calendar display.
²MENU OPERATION
·Activate FEATURE menu.
·Press the PROGRAM UP/DOWN button to select CALENDAR.
·Press the OK button to enter calendar display.
·Press the VOLUME UP/DOWN button to select your desired month;
·Press the PROGRAM UP/DOWN to select your desired year.
·You can press the MEN U button to clear the menu from the screen.
NOTE:
·The year can be selected from 1900 to 2099.
5.3 NOTEBOOKNotebook function enables you to store information such as phone number, leave message and etc, and can be used as a
reminder.
²How to input and correct information in notebook
·Press the NOTEBOOK button on the remote control to  activate the notebook window, and the display is shown as right;
·Then input information with 0-9 keys.
Example:if you want to  input the content: [email protected]. 
						

							20 1.  Press the CAPS button on the remote control to turn the capital function off, the color of CAPS on the screen will turn into
blue;
2.  Press 2 key twice to input the letter a; pressing 2 key repeatedly can cyclically input 2, a, b and c. The same
procedure is applicable to other digit or small letters input.
3.  Press the CAPS button again to turn on the capital function, the color of CAPS on the screen will turn into red.
4.  Press 2 key three times to input the letter B; pressing 2  key repeatedly can cyclically input 2, A, B and C. The
same procedure is applicable to other digit or capital letters input.
5.  Then input the small letter k as the procedure to input a in step2.
6.  To input symbols like @ ,press 1 button repeatedly until the symbol @ appears. Pressing 1key repeatedly can
cyclically select 1, blank space, the common marks and punctuation marks  + -.,:;(=)@%$#!? as shown.
·After finishing information writing, you can use DELETE button on the remote control to delete the unwanted or
incorrect word. And press INSERT (MENU) button on the remote control to select INS or OVER mode on the screen,
then insert word into  the stored information or overwrite it.
·Press OK button to store the message, and the word SAVING appears on the screen.
²How to utilize notebook function
·Move the cursor to select the sign with the VOLUME/PROGRAM UP/DOWN buttons, then press the OK button to
turn  into as shown. That means the notebook window with stored message will appear on the screen first when the
TV is turned on to remind someone of something. For example, when your wife turn on the TV, firstly the screen will
display the message you left: give your mother a call. If you press OK button to turn  into , then the notebook
window with stored message will not appear on the screen when the TV is turned on.
·If you want to display the message at a specified time, first move the cursor to select the sign  , then press the OK
button to turn OFF into 0:00, then press PRO. UP/DOWN button to set the desired time, e.g. 17:40 .That means the
notebook window with stored message will appear on the screen automatically at 17:40 to remind you to meet your aunty
Li tonight even if the TV is in standby mode.
NOTE:
the time setting in notebook must be based on the time set in CLOCK of TIMER menu. The time set in notebook must be later
than the time set in CLOCK.