Hyundai H Ledvd32v6 Instruction Manual

LED TV with built-in DVD player
Руководство по эксплуатации 
Instruction manual
H-LEDVD32V6
Телевизор цветного 
изображения c 
жидкокристаллическим  экраном и встроенным DVD-проигрывателем
 

Title
System setup General setup
Audio setup
Preference setup
General information
Troubleshooting Causes of interference
Accessories
Specifications
Table of contents 
Before you start 
Utilization of the product 
Important safeguards
Installation
Wall mounting
Stand installation
Connection
Connection Outdoor antenna connection
Other connections
Operation
Control elements  Front panel
 Back panel
Remote controller Changing the battery
General operations Teletext operations
OSD operation Channel setting...

23
Table of contentsBefore you start
If you want to dispose this product, do not mix it with general household waste. There is 
a separate collection system for used electronic products in accordance with legislation 
that requires proper treatment, recovery and recycling. Please contact your local authorities for the correct method of disposal. By doing so, 
you will ensure that your disposed product undergoes the necessar y treatment, recovery 
and recycling and thus prevent potential negative effects...

Installation
Wall mounting
For wall mounting the back panel of this 
unit is equipped with 4 screw holes (4 mm 
diameter, 200 mm horizontal spread distance 
x 100 mm vertical spread distance). A 
wall-mount bracket should be used for wall 
mounting (the bracket is not included and 
should be acquired separately). Manufacturer 
is not responsible for improper mounting 
resulting in damage of the unit.
Stand installationPlace the LED TV on a solid flat surface. 
Use soft material to place over the front...

5
Connection
Connection
Outdoor Antenna Connection
Use 75Ω coaxial cable plug or 300-75Ω 
impedance converter to plug in antenna input 
terminal on the rear of the cabinet.
Other connections•  Connect a TV or CATV antenna to the 
antenna jack. •  Connect a video source to the Composite 
video input jack with RCA cable. •  Connect an audio source to the proper 
Audio input jacks (left and right). •  Connect the power cord to the electric 
supply outlet. •  Connect PC audio input to PC main unit 
with...

6
Operation
Control elements    
Front panel
1
2
  1. Power indicator
  2. IR sensor
1. Disc slot
2. CH+/- buttons
3. VOL+/- buttons
4. MENU button
5. TV/AV button
6. POWER button
7. Power switch
8. HDMI x 3 inputs
9. Power cord
10. Audio/video input RCA
11. VGA input
12. USB port 
13. Digital audio output
14. Antenna jack
15. Headphone jack
16. Component video input
17. PC audio input
Back panel
1
2
3
4
5
6 78910 1112
13
14
15
16
17
Downloaded From TV-Manual.com Manual” 

7
Operation
Remote controller (RC)
1
2
3
4
5
6
7
9 8
11
  10
12
14 13 15
16
17
18
19
20
22 21
23
24
25
27 26
1. POWER button
2. Number buttons
3. SOURCE/REVEAL (
) button
4. SIZE ()/ZOOM () button
5. MENU button
6. ENTER button/cursor buttons (LEFT/RIGHT/
UP/DOWN)
7. VOL+/VOL- buttons
8. SLEEP/MENU button
9. LIST/REPEAT button
10. Green button/
 button 11. Red button/
 button
12. TEXT ()/ button
13. HOLD ()/ STILL button
14. CANCEL () button
15. INFO/INDEX () button
16. 
 button
17. AUDIO () button
18....

89
OperationOperation
General operations
•  Press POWER button on the unit or on 
the RC to switch on the power. Press POWER 
button again to switch the unit into standby 
mode. When the unit is on, the power indicator 
will be green. •  Press VOL- button repeatedly to decrease 
the volume; press VOL+ button repeatedly to 
increase the volume.
•  Press 
 to cut off sound, press this button 
again or increase volume to resume sound. •  Press SLEEP/MENU button repeatedly to 
set the sleep time (from 10 to...

89
OperationOperation
selected parameter.
6. Press MENU button to return to the 
previous menu page. Press EXIT button on the 
RC to quit the menu.
  Some menu items may be in grey color, 
in this case they are not adjustable. Pictures 
of OSD menu are for reference only; they may 
differ from the real screens.
Channel setting (only for TV source)
CHANNEL
Auto tuning
ATV Manual tuning
Programme edit
Move Menu EnterExit
•  Auto tuning: press RIGHT button to start 
automatic search of available channels....

10
Operation
Sound setting
SOUND
Sound mode
Treble
Bass
Balance
Auto volume
SPDIF mode
Move Menu EnterExit
•  Sound mode: Standard/Music/Movie/
Sports/User. •  Treble: adjust treble frequency.
•  Bass: adjust bass frequency.
•  Balance: adjust balance between left and 
right speaker. •  Auto volume: set the auto volume 
correction on/off. •  SPDIF mode: select PCM/Auto/Off.
Timer setting
TIMESleep timer
Auto sleep
OSD timer
Move Menu EnterExit
•  Sleep timer: select the period until 
automatic switch-off...