Hyundai H Ledvd22v6 Instruction Manual

LED TV with built-in DVD player
Руководство по эксплуатации 
Instruction manual
H-LEDVD22V6
Телевизор цветного 
изображения c 
жидкокристаллическим  экраном и встроенным DVD-проигрывателем
 

23
Table of contentsBefore you start
Dear customer!Thank you for purchasing our product. For safety, it is strongly recommended to read 
this manual carefully before connecting, operating and/or adjusting the product and keep 
the manual for reference in the future.
Title
System setup General setup
Audio setup
Preference setup
General information
Troubleshooting Causes of interference
Accessories
Specifications
Table of contents 
Before you start 
Utilization of the product 
Important safeguards...

23
Table of contentsBefore you start
If you want to dispose this product, do not mix it with general household waste. There is 
a separate collection system for used electronic products in accordance with legislation 
that requires proper treatment, recovery and recycling. Please contact your local authorities for the correct method of disposal. By doing so, 
you will ensure that your disposed product undergoes the necessar y treatment, recovery 
and recycling and thus prevent potential negative effects...

Installation
Wall mounting
For wall mounting the back panel of this 
unit is equipped with 4 screw holes (4 mm 
diameter, 100 mm horizontal spread distance 
x 100 mm vertical spread distance). A 
wall-mount bracket should be used for wall 
mounting (the bracket is not included and 
should be acquired separately). Manufacturer 
is not responsible for improper mounting 
resulting in damage of the unit.
Stand installationPlace the LED TV on a solid flat surface. 
Use soft material to place over the front...

5
Connection
Connection
Outdoor Antenna Connection
Use 75Ω coaxial cable plug or 300-75Ω 
impedance converter to plug in antenna input 
terminal on the rear of the cabinet.
Other connections•  Connect a TV or CATV antenna to the 
antenna jack. •  Connect a video source to the Composite 
video input jack with RCA cable. •  Connect an audio source to the proper 
Audio input jacks (left and right).
•  Connect the power cord to the DC 
adaptor, then connect the adapter to the DC 
power jack of this unit. •...

6
Operation
Control elements    
Front panel
6
7
1 23451. CH+/- buttons
2. VOL+/- buttons
3. MENU button
4. TV/AV button
5. POWER button
6. Power indicator
7. IR sensor
8. 
 button
9.  button
10. Disc slot
11. RF antenna jack
12. Left audio input RCA
13. Right audio input RCA
14. Composite video input
15. Component video input
16. Power adapter input
17. USB port 
18. HDMI input
19. PC (VGA) input
20. PC audio input
21. Video output
22. Right audio output
23. Left audio output
24. Headphone jack
25....

7
Operation
Remote controller (RC)
1
2
3
4
5
6
7
9 8
11
  10
12
14 13 15
16
17
18
19
20
22 21
23
24
25
27 26
1. POWER button
2. Number buttons
3. SOURCE/REVEAL (
) button
4. SIZE ()/ZOOM () button
5. MENU button
6. ENTER button/cursor buttons (LEFT/RIGHT/
UP/DOWN)
7. VOL+/VOL- buttons
8. SLEEP/MENU button
9. LIST/REPEAT button
10. Green button/
 button 11. Red button/
 button
12. TEXT ()/ button
13. HOLD ()/ STILL button
14. CANCEL () button
15. INFO/INDEX () button
16. 
 button
17. AUDIO () button
18....

89
OperationOperation
General operations
•  Connect the AC input cable to the TV. At 
this time the TV will enter standby mode. Press 
POWER button on remote control can turn on 
TV from standby mode. •  Press VOL- button repeatedly to decrease 
the volume; press VOL+ button repeatedly to 
increase the volume.
•  Press 
 to cut off sound, press this button 
again or increase volume to resume sound. •  Press SLEEP/MENU button repeatedly to 
set the sleep time (from 10 to 240 min or off). 
When sleep time...

89
OperationOperation
previous menu page. Press EXIT button on the 
RC to quit the menu.
  Some menu items may be in grey color, 
in this case they are not adjustable. Pictures 
of OSD menu are for reference only; they may 
differ from the real screens.
Channel setting (only for TV source)
CHANNEL
Auto tuning
ATV Manual tuning
Programme edit
Move Menu EnterExit
•  Auto tuning: press RIGHT button to start 
automatic search of available channels. To 
stop the process press MENU button. •  ATV manual...

10
Operation
•  Sound mode: Standard/Music/Movie/
Sports/User. •  Treble: adjust treble frequency.
•  Bass: adjust bass frequency.
•  Balance: adjust balance between left and 
right speaker. •  Auto volume: set the auto volume 
correction on/off. •  SPDIF mode: select PCM/Auto/Off.
Timer setting
TIMESleep timer
Auto sleep
OSD timer
Move Menu EnterExit
•  Sleep timer: select the period until 
automatic switch-off of the unit (10 - 240 min). •  Auto sleep: select the period of time after 
which the unit...