Hyundai H Ledvd22v2 Instruction Manual

							11
Operation
menu. Press the direction or number buttons to 
select your favorite title, it will play from the first 
chapter of selected title.
Program playbackUsing Program playback, you could select 
max. 16 tracks from the disc to playback in 
programmed order. Press PROGRAM button 
to display program menu as below (this is 
different for various types of discs):
•  According to the highlight area input the 
title and chapter number by numeric buttons, 
press 
 button to start; or move the cursor to 
the PLAY by cursor buttons, press OK button 
to start. •  While playing the program, you may press 
PROGRAM button to display the program menu 
for edit. To clear the program move the cursor 
to CLEAR and press OK button. Or press  
 
button to end the program. When press  
button again, the disc will play subsequently. •  While playing the program, there will be 
program playback indication and the current 
title and chapter number.
Track selection•  For Super-VCD/VCD/CD discs, while 
playing the disc, you may play your favorite 
tracks by number buttons. •  For MP3/JPEG discs, while playing the 
disc, you may play your favorite tracks by 
numeric buttons from the content menu.
Previous/NextWhile playing a disc: press  button to play 
the last title/chapter/track; press  button to 
mechanism. Some slight picture noise and 
some sounds are produced when the disc is 
loading, unloading and during playback, this is 
normal and can be ignored.
•  For some discs, after loading the content 
of the disc, you need to press 
 button or 
select from the disc menu to start. •  To eject the disc from the loader press 
 
button on the RC or EJECT button on the unit.
Play the discAccording to the disc content, menu will 
display for your selection. When playing the 
disc, you may use 
 button to toggle between 
Play and Pause mode.
   Manufacturer guarantees regular 
playback of licensed discs only. Some AVI files 
cannot be played due to their parameters and 
recording conditions. Video files more than 2 Gb 
having AVI extension can be played partially.
Menu playback1. Press MENU button to display disc menu 
or return to the root menu when playing the 
disc. For DVD discs, the screen will display 
the DVD disc menu (Root Menu). Please 
use navigation buttons to select and play the 
highlighted contents. 2. Press OK or 
 button to start from 
highlighted content. 3. Press 
 button once to stop, press  
button to resume from where you stopped; Press 
 button twice to stop, press   button to start 
from beginning.
  •  In order to protect the disc, press 
STOP button, then press press  to take disc 
out. When the disc is ejected, hold the disc 
edge slightly and take it from the eject direction 
to prevent scratches. •  When not using the DVD function (in 
standby or using other sources for a long time), 
please take out the disc to protect the DVD 
mechanism and the disc.
Title playback (for DVD title disc only)Press TITLE button to display the disc title 
Downloaded From TV-Manual.com Manual” 
						

							1213
OperationOperation
play the next title/chapter/track.
Forward/BackwardPress  button to toggle between different 
fast forward speeds in sequence: (x2/x4/x8/
x20/play). Press 
 button to toggle between 
different backward speeds in sequence (x2/x4/
x8/x20/play). •  While in backward or forward, you may use 
 button to resume normal speed.
•  For DVD discs, if backward to first title/
chapter, it will start from the beginning.
  During forward or backward, the sound 
will be off for some types of discs.
Slow motionPress SLOW button to toggle between 
different speeds consequently: 1/2 - 1/3 - 1/4 - 
1/5 - 1/6 - 1/7 - play. While in slow motion, you 
may press 
 button to resume normal speed. During slow motion, the sound will be off.
PausePress  button to pause and press  
button again to resume.
RepeatPress REPEAT button once to display the 
current repeat mode. •  For Super-VCD, VCD, CD, HDCD discs, 
while playing in sequent, you may use the 
repeat playback. There are 3 repeat modes, 
press REPEAT button to toggle between 
different modes in sequence (Repeat off/
Repeat track/Repeat disc). •  For DVD discs, you may setup the repeat 
playback mode. There are 4 repeat modes, 
press REPEAT button to toggle between 
different modes in sequent (Repeat off/Repeat 
chapter/Repeat title/Repeat disc). •  For MP3/JPEG discs, while playing the 
disc, you may use the repeat playback. There 
are 4 repeat modes, press REPEAT to toggle 
between different modes in sequent (Repeat 
off/Repeat track/Repeat directory/Repeat all).
DisplayPress DISPLAY button repeatedly to activate 
the roll-down menu on screen for the current 
Title, Chapter, Time and other playback 
information.
Goto (for DVD/CD discs)This function allows you to play your favorite 
title/chapter/track. Press GOTO button to 
activate the scroll-down menu for edit on 
screen. Press cursor button to navigate in 
the menu. According to the highlighted area, 
input your favorite title/chapter/track number 
by numeric buttons or input the playback time. 
After editing, press ENTER to start.
  If the input is invalid, it will not function. 
This feature does not work in program mode.
Intro playbackPress INTRO button to start intro playback of 
each track for several seconds. This function is  
unavailable for some disc formates.
Audio/LanguageFor DVD: Press AUDIO button once to display 
current audio language. Press AUDIO button 
repeatedly to toggle between different audio 
languages if any available. For VCD: Press AUDIO button once to display 
current audio channel. Press AUDIO button 
repeatedly to toggle between different audio 
channels (Stereo (L/R) => R/R => L/L).
Subtitle (for DVD discs only)Press SUBTITLE button once to display 
current subtitle. Press SUBTITLE button again 
to toggle between different subtitle languages.
  Selectable subtitle languages depend 
on the availability in the DVD contents.
AnglePress ANGLE button once to display current 
playback angle. Press ANGLE button again to 
toggle between different layback angle modes.
  Selectable playback angle depends on 
the availability of the DVD contents.
Downloaded From TV-Manual.com Manual” 
						

							1213
OperationOperation
ZoomPress ZOOM button to zoom out or in the 
picture. There are 7 zoom modes you can 
select in sequence: Zoom 2 - Zoom 3 - Zoom 4 
- Zoom 1/2 - Zoom 1/3 - Zoom 1/4 - Zoom Off.
Repeat A-BPress A-B button at where you want to start 
the repeat portion, there is indication “REPEAT 
A-” on the screen. Press A-B button again at 
where you want to stop the repeat portion, 
and there is indication “REPEAT A-B”. That 
means the repeat function start to play the 
portion from A to B automatically. Press A-B 
button third time, there is an indication “A-B 
CANCEL”, that means you cancel this AB 
repeat playback function.
  For Super-VCD, VCD and CD discs, 
repeat AB is the only function within the same 
track. When playing the others, repeat A-B will 
cancel automatically. For DVD discs, repeat 
AB is the only function within the same title/
chapter. When playing the others, repeat A-B 
will cancel automatically.
MP3/JPEG PlaybackAfter loading an MP3/JPEG disc, it will start 
to scan for stored MP3/JPEG folders. And then 
It will display the MP3 contents automatically 
(see interface below) and start to play the first 
file (highlighted file).
1 234 5 6
1. Current folder
2. MP3 file playback
3. JPEG file playback
4. Video file playback
5. Current file
6. Scroll bar
•  Press cursor buttons to highlight the 
folders, files or mode selection. •  When play or pause with picture playback, 
you could use cursor buttons to flip or rotate 
the picture.
USB/SD/MMC operationInsert a USB device or SD/MMC memory 
card into the corresponding slot. Press INPUT 
button to select DVD mode. In System Setup 
menu, item SOURCE, select the needed 
storage. Please note that the last connected storage 
is active by default. All operations with files 
contained in USB/SD/MMC are the same as 
operations with file discs as described above. USB format supports 1.0 and 2.0. Capacity: 
up to 250 Gb. For correct and satisfactory 
operation, licensed SD/MMC memory cards of 
famous brands should be used with this unit. 
Avoid using memory cards of unknown brands. 
SD/MMC capacity: up to 16 Gb.
DVD setting
Press SETUP button to enter the DVD setup 
menu. Press /// buttons to 
move and select category (highlight) between 
different submenu, then press OK button to 
confirm. Press SETUP button again to exit the 
setting menu.
  In this manual, the Menu may be 
different from your real TV’s screen shown. 
Because this manual is just a sample to help 
you operate DVD menu setting.
Downloaded From TV-Manual.com Manual” 
						

							14
Operation
System Setup
SYSTEM SETUP
TV SYSTEM SOURCE
TV TYPE
PASSWORD
RATING
DEFAULT
EXIT SETUP
•  SOURCE
In this menu you can select storage for 
playback Disc/USB/Card/Auto. •  TV SYSTEM
This menu enables you to set the picture 
format for your TV/DVD between NTSC/PAL/
AUTO according to your request and local TV 
system. •  TV TYPE
This menu enables you to select one of the 
three aspect ratios: 4:3 PS/4:3LB/16:9. 4:3PS (Normal): Normal Pan and Scan is 
used for most normal television broadcasts and 
it is the default setting. It has an aspect ratio 
of 4:3. If you select this setting when viewing a 
DVD, the picture will fill the screen but you will 
not see the left and right edges of the picture. 4:3LB (Normal): Normal Letter Box will 
show the DVD in its original aspect ratio .So 
depending on size of your television screen, 
you could see black boards above and below 
the picture. 16:9 (Wide): Choose this setting if you have 
a widescreen television.
  Playback screen size may vary 
according to disc contents. For discs with 4:3 
contents, using any mode would only display 
4:3 screen. Screen ratio selection should be 
according to the connected TV or display 
aspect ratio. •  PASSWORD
The default setting is locked. No rating 
selection or change password could be done. 
To edit the Rating setting please enter default  password “0000” by number buttons, then 
press OK button to confirm.
To change password you could input any 4 
digit number when the lock is unlocked. Once 
the 4 digit number is entered, that will be new 
password. •  RATING
Playback for some discs with rating. You 
could select the rating setting according to your 
preference. Rating restriction divided in eight 
different category from KID SAFE to ADULT. •  DEFAULT SETTING
Press OK button to restore factory default.
Language Setup
LANGUAGE SETUP
OSD LANGUAGE
AUDIO LANG
SUBTITLE LANG
MENU LANG
EXIT SETUP
You can choose the suitable language as 
displayed menu on the screen.
Audio Setup
AUDIO SETUP
AUDIO OUT
TONE
EXIT SETUP
AUDIO OUTPUT
Downloaded From TV-Manual.com Manual” 
						

							15
Operation
Select SPDIF/OFF, SPDIF/RAW or SPDIF/
PCM audio output mode. TONE
Use CH+/CH- buttons to move the scroll and 
adjust the tone.
Digital Setup
DIGITAL SETUP
DYNAMIC RANGE
DUAL MONO
EXIT SETUP
DYNAMIC RANGE
When switch the compress mode to 
“Dynamic Range”, adjust the compress ratio for 
different effect: When selected FULL, the peak 
signal value is smallest; When selected OFF, 
the peak signal value is biggest. DUAL MONO
You could select 4 different audio output 
same as the menu displayed on the screen: 
STEREO/MONO L/MONO R/MIX MONO.
Downloaded From TV-Manual.com Manual” 
						

							16
General information
Troubleshooting
Below is a table describing simple measures that can help you eliminate most problems likely 
to emerge when this unit is in use. If below measures do not help, turn to a service center or to the 
nearest dealer.
Symptom Cause Solution
No picture, no 
sound, and no 
indicator light The power cord is not plugged in.
Contrast, brightness, sharpness, color 
and volume are all in the minimum 
value or TV is in mute mode. Plug the power cord in.
Alter the value of contrast, 
brightness, sharpness, color and 
volume.
Picture and 
sound with 
abnormity Contrast and color are set improperly.
Color system is set improperly.
Sound system is set improperly. Set the value of Contrast and color 
properly.
Set the sound system properly.
Picture is spotted 
or with snow Signal source is low-grade or the 
signal is in a lower quality. Use the qualified signal cord.
Blue background No video signal or the signal cord is 
improperly/not connected. Connect the signal cord properly.
PC Picture is not 
in the middle of 
the screen Picture is not well adjusted.
Adjust H/V position manually to 
adjust it.
No sound No audio signal or the signal cord is 
im-properly/not connected. Connect the audio signal cord 
properly.
Set the sound system properly.
Disc cannot be 
loaded The unit already contains a disc.
Remove the disc in the player then 
put a new one.
Disc cannot be 
read The disc is inserted with a wring 
side. Insert the compact disc with the right 
side.
Compact disc is extremely dirty or 
defective. Clean the disc or try to play a new 
one.
The RC does not 
work Batteries are improperly installed or 
exhausted. Make sure the positive and the 
negative polarities are correct.
Reattach the battery lid.
Replace the batteries.
Causes of interferenceIncorporated in your TV receiver are the most up-to-date devices to eliminate interference. 
Local radiation however, can create disturbances, which visibly af fect your picture. Proper 
installations, a good aerial are your best safeguards against these disturbances. •  RF INTERFERENCE: Moving ripples across the screen are caused by nearby transmit ting or 
receiving short-wave radio equipment.
Downloaded From TV-Manual.com Manual” 
						

							17
General information
•  DIATHERMY: Herringbone pattern 
and partial picture loss can result from the 
operation of diathermy equipment from a 
nearby doctor’s surgery or hospital. •  SNOW: Weak TV signals from long 
distant stations result in an instead picture 
and give the effect of falling snow. An antenna 
adjustment or antenna amplifier may be 
needed. •  GHOST: Multiple image, caused by 
TV signals reflected back from surrounding 
buildings, hills, aircraft, etc. is minimized by 
correct aerial positioning. •  CAR IGNITION: Nearby cars and electrical 
motors can cause small streaks across the 
picture or make the picture roll.
  The LCD panel is a high technology 
product with many thin film transistors that can 
give you a fine picture details. Occasionally, 
a few non-active pixels may appear on the 
screen as a fixed point of blue, green, red, 
black or white, please note that this does not 
affect the performance of your LCD TV.
Accessories
1.  LED TV      1 pc
2.  Remote controller    1 pc 
3.  Power cord      1 pc
4.  Stand installation sheet    1 pc
5.  Batteries ААА 1,5 V    2 pcs
6.  DC adapter      1 pc
7.  Consumer information    1 pc
8.  Warranty card      1 pc
9.  Instruction manual    1 pc
Downloaded From TV-Manual.com Manual” 
						

							1819
General informationСодержание
Specifications
Size (diagonal)     22” (55 cm)
Brightness      300 cd/m2
Contrast     1000:1
Response time      5 ms
Resolution      1920 x 1080
Aspect ratio      16:9
Color system      PAL, SECAM
Sound system      DK, I, BG
Storage support      CD-R/CD-RW, DVD-R/DVD-RW, DVD+R/DVD+RW/USB/
        SD/MMC/MS
Format support      DVD/SVCD/VCD/CDDA/MP3/HDCD/JPEG/
        Kodak picture CD/MPEG4 (DivX)
NICAM STEREO      2 x 3 W
AV RCA in      +
Coaxial out      +
SCART       +
PC audio input       +
HDMI        +
VGA        +
Component (YUV)    +
RF antenna      +
Headphone out      +
Russian and English OSD    +
Progressive scan     +
Digital comb filter     +
Quantity of channels    199
Teletext      +
Power supply (DC adapter)   ~100 - 240 V, 50/60 Hz (12 V 5 A)
Power consumption    60 W
Electric shock protection class  I
Unit dimensions      548 x 160 x 395 mm
Net/Gross weight     4.4 kg/6 kg
  Warning: Specifications may be subject to change without notice for improvement.
Downloaded From TV-Manual.com Manual” 
						

							Повтор
Отображение информации на экране
Переход
Обзорное воспроизведение
Аудио
Субтитры
Угол обзора
Изменение масштаба
Повтор фрагмента А-В
Воспроизведение MP3/JPEG
Операции с USB/SD/MMC
Настройка DVD Настройки системы
Установки языка
Установка аудио
Цифровые установки
Общая информация
Руководство по устранению 
неисправностей Источники помех
Комплект поставки
Технические характеристики 29
29
29
29
30
30
30
30
30
30
31
31
31
32
32
32
33
33
34
34
35
18
19
General informationСодержание
Уважаемый покупатель!Благодарим Вас за покупку нашего изделия. Чтобы понять, как правильно и безо-
пасно пользоваться приобретенным устройством, рекомендуется тщательно изучить 
настоящее руководство перед подключением и эксплуатацией изделия. Со храняйте 
руководство для использования в будущем.
Содержание 
Перед началом эксплуатации 
Утилизация изделия
Меры предосторожности
Установка подставки
Крепление на стену
Установка и подключение
Подключение Подключение внешней антенны
Прочие подключения
Управление устройством
Элементы управления  Передняя, боковая и верхняя панели
 Задняя панель
Пульт дистанционного управления Установка батареек
Общие операции  Источники аудио-видео сигнала
 Операции с телетекстом
 Монитор ПК
Экранное меню Настройка изображения
Настройка звука
Настройка канала
 Установки Настройка ПК
Операции с DVD-плеером Выключение/включение DVD-плеера
Загрузка диска
Воспроизведение диска
Воспроизведение меню
Воспроизведение разделов
Программируемое воспроизведение
Выбор трека
Предыдущий/следующий трек
Перемотка назад/вперед
Замедленное воспроизведение
Пауза 19
20
20
20
21
21
22
22
22
22
23
23
23
23
24
24
25
25
25
26
26
26
26
26
27
27
27
27
27
28
28
28
28
29
29
29
29
29
Downloaded From TV-Manual.com Manual” 
						

							2021
Перед началом эксплуатацииПеред началом эксплуатации
Если вы желаете утилизировать данное изделие, не выбрасывайте его вместе с 
обычным бытовым мусором. Существует отдельная система сбора использованных 
электронных изделий в соответствии с законодательством, которая предполагает 
соответствующее обращение, возврат и переработку. Обращайтесь в органы местного управления за инструкциями по правильной 
утилизации продукта. Тем самым Вы обеспечите утилизацию Вашего изделия с 
соблюдением обязательных процедур по обработке, утилизации и вторичной пере-
работке и, таким образом, предотвратите потенциальное негативное воздействие на 
окружающую среду и здоровье людей.
Утилизация изделия
Меры предосторожности
•  Перед подсоединением кабеля питания 
к адаптору постоянного тока убедитесь, что 
напряжение адаптера соответствует напря-
жению электрической сети. •  В комплект поставки входит сетевой 
адаптор постоянного тока модели KPA-060F. 
Не рекомендуется использовать другие 
адапторы для питания данного устройства. •  Извлеките шнур питания из розетки и 
свяжитесь с сервисной службой в следую-
щих случаях: если в устройстве имеются 
явные неисправности, например, из него 
идет дым, чувствуется специфический за-
пах или слышен нехарактерный звук; если 
внутрь устройства попала жидкость или 
посторонние предметы; если нет изображе-
ния или звука; если поврежден корпус или 
панель; если Вы пользуетесь устройством 
согласно инструкции, но оно не работает 
должным образом. •  Устройство можно подключать только к 
розетке, имеющей заземление. •  Во избежание поражения электриче-
ским током защищайте шнур питания от 
возможного нажатия на него или защемле-
ния, особенно рядом с разъемами. •  Не закрепляйте шнур питания метизами.
•  Если Вы не пользуетесь устройством 
длительное время или в случае грозы  обязательно отключайте шнур питания из 
розетки, а также отключайте все сигналь-
ные кабели от входных разъемов.
•  При отключении вилки из розетки всег-
да держитесь за утолщение на вилке, не 
касайтесь металлических частей, не тяните 
за шнур и не ломайте и не перегибайте его, 
не ремонтируйте, не перекручивайте и не 
нагревайте. •  Немедленно свяжитесь с сервисным 
центром, в случае если имеются какие-либо 
неисправности шнура питания, в нем оголи-
лись жилы или он поврежден. •  Замените сетевую розетку, если в 
нее невозможно вставить вилку или вилка 
плохо закрепляется в розетке. Иначе могут 
возникнуть неисправности или произойти 
несчастные случаи или возгорания. •  Не прикасайтесь к проводам мокрыми 
руками. •  Запрещается использование розетки, в 
которую подключено несколько устройств. 
Перегрузка такой розетки может привести 
к пожару. •  Перед работой с устройством необ -
ходимо полностью прочитать и понять все 
инструкции. Необходимо соблюдать все пред-
упреждения и следовать всем инструкциям, 
приведенным в настоящем руководстве. •  Пожалуйста, используйте только реко-
мендованные производителем аксессуары. 
Использование других аксессуаров может 
Downloaded From TV-Manual.com Manual”