Hyundai H Led32v9 Instruction Manual

ТЕЛЕВИЗОР
ЦВЕТНОГО ИЗОБРАЖЕНИЯ
ЖИДКОКРИСТАЛЛИЧЕСКИЙ (LCD)
LED TV
Руководство по эксплуатации 
Instruction manual
H-LED32V9
 

Table of contents 
Before you start 
Utilization of the product 
Important safeguards
InstallationWall mounting
Stand installation
Connection Outdoor antenna connection
Other connections
Operation
Control elements  Front panel
 Back panel
Remote controller Changing the battery
General operations  Teletext operations
OSD operation Channel setting
Picture setting
Sound setting
Timer setting
Option setting
Lock setting
Hotel mode
Programme guide
USB operation General operations of playback
General...

23
Table of contentsBefore you start
If you want to dispose this product, do not mix it with general household waste. There is 
a separate collection system for used electronic products in accordance with legislation 
that requires proper treatment, recovery and recycling. Please contact your local authorities for the correct method of disposal. By doing so, 
you will ensure that your disposed product undergoes the necessar y treatment, recovery 
and recycling and thus prevent potential negative effects...

4
Before you start/Installation
product. If the liquid is spilt, it may cause the 
fire, electric shock or breakdown.•  Do not install it at the place on the strong 
magnetic field or current field. It may cause 
break down. This equipment may be observed 
deterioration of the picture by electromagnetic 
radiation in electromagnetic environment. •  Fasten the wheel of the product or shelf 
with wheels when installing this product. If it 
moves or is tipped over, it may be damaged. •  Do not place any...

5
Сonnection
Outdoor Antenna ConnectionUse 75Ω coaxial cable plug or 300-75Ω 
impedance converter to plug in antenna input 
terminal on the rear of the cabinet.
Other connections•  Connect a TV or CATV antenna to the 
antenna jack. •  Connect a video source to the Composite 
video input jack with RCA cable. •  If the video source has a SCART output 
jack, you can connect the signal to the monitor 
by the SCART cable (not included). •  Connect an audio source to the proper 
Audio input jacks (left and...

6
Operation
1. CH+/CH- buttons
2. VOL+/VOL- buttons
3. MENU button
4. TV/AV button
5. POWER button
6. Power indicator
7. Remote control sensor
Control elements    
Front panel
1 23456 7
Back panel
1. HDMI inputs x 3
2. PC (VGA) input
3. Stereo audio input for 
Component video-1
4. Component video input-1
5. Stereo audio input for 
Component video-2
6. Component video input-2
7. Audio-video input-2
8. Digital audio output
9. Power cord
10. SCART1 connector
11. SCART2 connector
12. Antenna input
13. HDMI4...

7
Operation
Remote controller (RC)
INDEX
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15 16
17
18
19
20
21
22
23
24
25
26
27
28
29
1. POWER button
2. Number buttons
3. SOURCE/REVEAL (
) button
4. MENU button
5. ENTER button/cursor buttons (LEFT/RIGHT/
UP/DOWN)
6. CH+/CH- buttons
7. LIST button
8. SLEEP button
9. 
 button
10. Green button/ button 11. Red button/
 button
12. TEXT ()/ button
13. HOLD ()/ STILL button
14. CANCEL () button
15. SUBTITLE/SUBPAGE () button
16. INFO/INDEX () button
17.  button
18. AUDIO ()...

89
OperationOperation
General operations
•  Press POWER button on the unit or on 
the RC to switch on the power. Press POWER 
button again to switch the unit into standby 
mode. When the unit is on, the power indicator 
will be green. •  Press VOL- button repeatedly to decrease 
the volume; press VOL+ button repeatedly to 
increase the volume.
•  Press 
 button to cut off sound, press this 
button again or adjust volume to resume sound. •  Press SLEEP button repeatedly to set the 
sleep time (from 10 to...

89
OperationOperation
RC or CH+/- buttons on the panel to select a 
parameter to adjust.
5. Press cursor buttons on the RC or VOL+/- 
or CH+/- buttons on the panel to adjust the 
selected parameter. 6. Press MENU button to return to the 
previous menu page. Press EXIT button on the 
RC to quit the menu.
  Some menu items may be in grey color, 
in this case they are not adjustable. Pictures 
of OSD menu are for reference only; they may 
differ from the real screens.
Channel setting
CHANNEL
Auto Tuning
DTV...

10
Operation
Picture setting
PICTURE
Picture Mode
Colour Temp
Aspect Ratio
DNR
ScreenEnter
Exit
•  Picture Mode: Home/Vivid/Standard/
Soft/User. When User mode is selected, you 
can adjust contrast, brightness, saturation, 
sharpness and tint (in NTSC) of the image. •  Colour Temperature: Normal/Warm/User/
Cool. •  Aspect ratio: Set the picture format: 
Auto/4:3/16:9/Zoom1/Zoom2/14:9. •  DNR: Dynamic noise reduction effect for 
reducing the video noise level. •  Screen (only in PC-RGB mode):
Auto adjust:...