Hyundai H Led22v6 Instruction Manual

							LED TV
Руководство по эксплуатации 
Instruction manual
H-LED22V6
ТЕЛЕВИЗОР
ЦВЕТНОГО ИЗОБРАЖЕНИЯ
ЖИДКОКРИСТАЛЛИЧЕСКИЙ (LCD)
 
						

							Table of contents 
Before you start 
Utilization of the product 
Important safeguards
InstallationWall mounting
Stand installation
Connection
Connection Outdoor antenna connection
Other connections
Operation
Control elements  Front panel
 Back panel
Remote controller Changing the battery
General operations Teletext operations
OSD operation Channel setting
Picture setting
Sound setting
Timer setting
 Option setting Screen setting
USB operation General operatoins of file playback
General information
Troubleshooting Causes of interference
Accessories
Specifications
2 3
Table of contentsBefore you start
Dear customer!Thank you for purchasing our product. For safety, it is strongly recommended to read 
this manual carefully before connecting, operating and/or adjusting the product and keep 
the manual for reference in the future.
2
3
3
3
4
4
4
5
5
5
5
6
6
6
6
7
7
8
8
8
9
9
10
10
10
10
11
11
12
12
12
13
13
Downloaded From TV-Manual.com Manual” 
						

							23
Table of contentsBefore you start
If you want to dispose this product, do not mix it with general household waste. There is 
a separate collection system for used electronic products in accordance with legislation 
that requires proper treatment, recovery and recycling. Please contact your local authorities for the correct method of disposal. By doing so, 
you will ensure that your disposed product undergoes the necessar y treatment, recovery 
and recycling and thus prevent potential negative effects on the environment and human 
health.
Utilization of the product
Important safeguards
•  Please unplug the power cord from the AC 
outlet and contact a service center for repair 
if following occurs: any obvious abnormality 
appears in the unit, such as smoky, peculiar 
smell or strange sound; liquid has been spilled or 
other objects have fallen into the unit; no picture 
or sound; cover or panel is broken; although you 
have operated the unit following the operating 
instructions, it still cannot work normally.
•  This unit should only be connected to a 
wall socket having grounding.
•  Always disconnect the power cord and 
antenna during a storm. •  Do not fix the power cord with a metal nail.
•  Unplug the power cord from the AC outlet; 
also unplug the signal cables from the input 
ports when the unit is unused for long periods 
of time. •  When unplugging the plug, always hold 
the wide slot, do not touch the metal part, and 
do not destroy, refit, twist, pull or roast the 
power cord. •  Please contact the service center 
immediately if you found that the core is 
showed in the air or has been broken. •  Please replace the AC outlet if the metal 
bolt cannot be inserted into the power socket 
completely or it cannot be fastened even when 
it was pushed in, otherwise, any accidents of 
shocks and fires would happen. •  Never touch the antenna lie or power plug 
if it stars to thunder. •  Do not touch the power plug with wet 
hands. •  Do not use any non-rated power socket 
with numerous devices jointed on one power 
socket or cable device. The wire of non-
designated capacity may cause the fire due to 
the generation of heat. •  All instructions must be read and 
understood well before you operate the unit. 
Heed all warnings and follow all instructions. •  Please use the accessories provided 
by the manufacturer. Using inadequate 
accessories may result in accidents. •  Please adjust the product through the 
panel buttons or the remote controller, do 
not remove the cover or attempt to service 
the product by yourself. Do not disassemble 
back cover and do not make maintenance by 
yourself to avoid the electric shock. •  Over-press the panel may destroy the 
product. •  Do not place the product on an unstable 
cart, stand surface, tripod, bracket, or table. 
The product may fall, causing serious accidents 
as well as the damage to the product.  •  Please place the product on a flat surface 
in a well-ventilated location. Keep it away from 
the burning-light, direct sunlight, vibration, 
high-temperature and humidity. •  Do not place any vase, potted plant, cup, 
medicine and any container with water on this 
Downloaded From TV-Manual.com Manual” 
						

							Installation
Wall mounting
For wall mounting the back panel of this 
unit is equipped with 4 screw holes (4 mm 
diameter, 100 mm horizontal spread distance 
x 100 mm vertical spread distance). A 
wall-mount bracket should be used for wall 
mounting (the bracket is not included and 
should be acquired separately). Manufacturer 
is not responsible for improper mounting 
resulting in damage of the unit.
Stand installationPlace the LED TV on a solid flat surface. 
Use soft material to place over the front screen 
to avoid any damage. Then put the slits of the 
stand onto the fixing elements in the lower part 
of the unit until a click and fix the two parts by 
four screws as shown below:
4
Before you start
product. If the liquid is spilt, it may cause the 
fire, electric shock or breakdown. •  Do not install it at the place on the strong 
magnetic field or current field. It may cause 
break down. This equipment may be observed 
deterioration of the picture by electromagnetic 
radiation in electromagnetic environment. •  Fasten the wheel of the product or shelf 
with wheels when installing this product. If it 
moves or is tipped over, it may be damaged. •  Do not place any fire source such as 
candlelight close to this product or place it on 
this product. If it is tipped over or fallen down, it 
may cause damage or fire. •  Do not place the unit into closed space 
of TV for better ventilation; it can reduce the 
product lifetime. Keep a space at least 10 cm 
at above, left and right of the TV. •  Please place all the signal cords behind of 
rear panel. •  Do not overexert or touch the panel when 
you convey the product. Do not transfer the 
LCD TV up or down display direction. •  Do not transport it with the power cord 
or the connection cable connected. If you 
move this product with the power cord or the 
connection cable connected, the damaged 
power cord, connection cable or connection 
terminal may cause the fire, the electric shock 
or breakdown. •  2 persons or more shall transport the 
device, which is heavier than 18 kg. If you drop 
or tip over the device, it can be damaged. •  The temperature of the product’s body 
becomes a little higher after a long period use. 
This phenomenon indicates that heat exchange 
in normal working mode, thus please do not 
let children or anyone who is sensitive of 
temperature to touch.
All images provided herein are schematic 
drawings and may differ from of real objects.
 
						

							5
Connection
Connection
Outdoor Antenna Connection
Use 75Ω coaxial cable plug or 300-75Ω 
impedance converter to plug in antenna input 
terminal on the rear of the cabinet.
Other connections•  Connect a TV or CATV antenna to the 
antenna jack. •  Connect a video source to the Composite 
video input jack with RCA cable. •  Connect an audio source to the proper 
Audio input jacks (left and right). •  Connect the power cord to the electric 
supply outlet. •  Connect PC audio input to PC main unit 
with related audio cable in PC mode. •  When using the unit as a computer screen, 
connect the PC to the PC jack of the unit by 
the relevant cable.
•  If the video source has a HDMI output  jack, you can connect the signal to the unit by 
HDMI cable (not included).
•  Component input is intended for receiving 
component video signal if connected to the 
component output of external signal source. To 
receive audio signal for component video, please 
use Left and Right audio inputs of this unit. •  Connect an external device (e.g., VCR-/
DVD-recorder) to the proper Audio/Video 
output jacks of this unit with AV RCA cable. •  Connect your headphones or earphones 
(not included) to the headphone socket of this 
unit. When headphones are connected, the 
sound output through the built-in speakers of 
this unit is mute. •  Coaxial output is intended for transmitting 
multi-channel sound to an external decoder 
(e.g. in 5.1-CH format). RCA cable should be 
used for connection.
75 Ohm co-axis cable
TVRF antenna jack
Antenna cable connector
Downloaded From TV-Manual.com Manual” 
						

							6
Operation
Control elements    
Front panel
6
7
1 23451. CH+/- buttons
2. VOL+/- buttons
3. MENU button
4. TV/AV button
5. POWER button
6. Power indicator
7. IR sensor
8. RF antenna jack
9. Left audio input RCA
10. Right audio input RCA
11. Composite video input
12. Component video input
13. Power switch
14. USB port 
15. HDMI input
16. Power cord
17. PC (VGA) input
18. PC audio input
19. Video output
20. Right audio output
21. Left audio output
22. Headphone jack
23. Digital coaxial audio output
Back panel
89
10
11
12
14
13 1516 17 181920 21 2223
Downloaded From TV-Manual.com Manual” 
						

							7
Operation
Remote controller (RC)
1
2
3
4
5
6
7
9 8
11
  10
12
13 14
15
16
17
18
19
21 20
22
23
24
25
1. POWER button
2. Number buttons
3. SOURCE/REVEAL (
) button
4. SIZE ()/ZOOM () button
5. MENU button
6. ENTER button/cursor buttons (LEFT/RIGHT/
UP/DOWN)
7. VOL+/VOL- buttons
8. SLEEP button
9. LIST/REPEAT button
10. Green button/
 button 11. Red button/
 button
12. TEXT ()/ button
13. HOLD ()/ STILL button
14. INFO/INDEX () button
15. 
 button
16. AUDIO () button
17. RECALL () button
18. EXIT button
19. CH+/CH- buttons
20. CANCEL (
) button
21.  button
22. Yellow button/ button
23. Blue button/ button
24. E/W button
25. SUBPAGE (
) button
Changing the battery1.  Remove the battery compartment cover 
on the back of the RC. 2.  Insert the batteries into the battery 
compartment making sure that the correct 
polarity is observed. 3.  Install the cover back.
•  Use two AAA batteries for the RC. The RC 
should be pointed at remote sensor within 8 
meters and within 30 degrees at the left or the 
right side. •  Take the battery out of the RC if it is not 
used for a long time. •  Do not mix new and used batteries or 
different types of batteries. Weak batteries can 
leak and severely damage the RC. •  Do not expose the RC to shock, liquids, 
and do not place it in an area with high 
humidity.
1 23
 
						

							89
OperationOperation
General operations
•  Press POWER button on the unit or on 
the RC to switch on the power. Press POWER 
button again to switch the unit into standby 
mode. When the unit is on, the power indicator 
will be green. •  Press VOL- button repeatedly to decrease 
the volume; press VOL+ button repeatedly to 
increase the volume.
•  Press 
 to mute sound, press this button 
again or increase volume to resume sound. •  Press SLEEP button repeatedly to set the 
sleep time (from 10 to 240 min or off). When 
sleep time is set, press this button to display 
the time remaining until the auto turn off. •  Press AUDIO (
) button in TV mode 
repeatedly to switch between Nicam Stereo, 
Mono, Dual I and Dual II sound modes (can be 
unavailable for some channels). •  Press repeatedly TV/AV button on the 
unit or press SOURCE button on the RC, 
then press UP/DOWN cursor buttons to cycle 
through the available source list as follows: TV 
- AV - YPbPr - HDMI - PC - Media. •  Select the TV function mode. Press 
CH-/CH+ buttons to select previous or next 
channels; or press number buttons to enter a 
channel number from 0 to 200 directly. •  Press RECALL (
) button on the RC 
to select from the present channel and the 
previously displayed channel. •  Press 
 button to display the Favourite 
channel list in TV mode (you should setup your 
favourite channels in Program Edit menu). •  Press INFO button to display the preset 
TV channel play information. •  Press  ZOOM (
) button repeatedly to 
select an aspect ratio: Auto/4:3/16:9/Zoom1/
Zoom2. The set of available aspects can vary 
depending on the current signal source.
Teletext operations (option)Select a TV channel in order to pick up 
the picture signal of Teletext. Teletext button 
functions are as follows: TEXT (
): Press this button to enter into 
TEXT mode. Press this button again to enter 
mixed mode. Press the button again to return 
to the channel you are watching. HOLD (
): Press this button to stop the 
move to the next page. Press this button again 
to cancel operation. INDEX (
): Press this button to go to the 
index page. SIZE (
): Press this button to enlarge the 
top part of the page. Press this button again to 
enlarge the bottom part of the page. Press this 
button third time to normal size text page view. REVEAL (
): Press this button to reveal the 
cancelled information. Press this button again 
to cancel the information. SUBPAGE (
): Press this button to select 
sub-page. Input the number of sub-page and 
use numeric buttons in the format 0001 for 
sub page 1. The teletext will search for the sub 
page. Press SUBPAGE button again to exit the 
subpage mode. CANCEL (
): Press this button to exit from 
the teletext mode. Red/Green/Yellow/Blue buttons: Press 
these 4 color buttons to access directly to 
corresponding color page displayed at the 
lower parts of teletext screen.
OSD operation
1. Press MENU button to enter the setting 
menu displayed on the screen. 2. Press LEFT/RIGHT cursor buttons on the 
RC or VOL+/- buttons on the panel to select 
setting page. 3. Press DOWN cursor button or ENTER 
button on the RC or CH+ button on the panel 
to go to the parameter list. 4. Press UP/DOWN cursor buttons on the 
RC or CH+/- buttons on the panel to select a 
parameter to adjust. 5. Press cursor buttons on the RC or VOL+/- 
or CH+/- buttons on the panel to adjust the 
selected parameter.
Downloaded From TV-Manual.com Manual” 
						

							89
OperationOperation
6. Press MENU button to return to the 
previous menu page. Press EXIT button on the 
RC to quit the menu.
  Some menu items may be in grey color, 
in this case they are not adjustable. Pictures 
of OSD menu are for reference only; they may 
differ from the real screens.
Channel setting (only for TV source)
CHANNEL
Auto tuning
ATV Manual tuning
Programme edit
Move Menu EnterExit
•  Auto tuning: press RIGHT button to start 
automatic search of available channels. To 
stop the process press MENU button. •  ATV manual tuning: Press ENTER button 
to enter into manual tuning menu: Current Ch: select channel number.
Color System: select corresponding color 
system. Sound System: select corresponding sound 
system. Fine-tune: perform fine adjustment of the 
current frequency. AFC: set On/Off automatic frequency 
correction.  Search: press LEFT/RIGHT buttons; the 
unit will search for next available channel 
downward or upward and save it under the 
current number. •  Program Edit: this item allows you to sort 
TV programs according to your preferences. 
Enter into program edit menu: Delete: Select the channel you want to delete. 
Press red button to delete the channel. Rename: Highlight the needed channel. Press 
green button; then press UP/DOWN buttons to 
select a symbol. Press LEFT/RIGHT buttons to 
select the next symbol. Press green button to 
confirm. Move: Highlight the needed channel. Press 
yellow button; select the position to put the 
channel into. Press yellow button to confirm. Skip: Highlight the needed channel. Press 
blue button; now this channel will be skipped 
when you select previous/next channels. Favorite: Select the channel you want to edit. 
If this channel is your favorite channel, you can 
add the mark 
 to the channel as your favorite 
channel by pressing  button.
Picture setting
PICTURE
Picture mode
Contrast
Brightness
Color
Tint
Sharpness
Color temperature
Noise reduction
Move Menu EnterExit
•  Picture Mode: User/Standard/Dynamic/
Mild. •  Contrast
•  Brightness
•  Color
•  Tint: adjust the tone of color when your 
system is in NTSC. •  Sharpness
•  Color Temperature: Normal/Warm/Cool.
•  Noise Reduction: Digital noise reduction 
effect for reducing the video noise level: Off/
Low/Middle/High.
Downloaded From TV-Manual.com Manual” 
						

							10
Operation
Sound setting
SOUND
Sound mode
Treble
Bass
Balance
Auto volume
SPDIF mode
Move Menu EnterExit
•  Sound mode: Standard/Music/Movie/
Sports/User. •  Treble: adjust treble frequency.
•  Bass: adjust bass frequency.
•  Balance: adjust balance between left and 
right speaker. •  Auto volume: set the auto volume 
correction on/off. •  SPDIF mode: select PCM/Auto/Off.
Timer setting
TIMESleep timer
Auto sleep
OSD timer
Move Menu EnterExit
•  Sleep timer: select the period until 
automatic switch-off of the unit (0 - 240 min). •  Auto sleep: select the period of time after 
which the unit will automatically switch off if no 
operation is done. •  OSD timer: select the period of time after 
which the OSD will be hidden.
Option setting
OPTION
OSD language
TT language
Aspect ratio
Blue screen
Key lock
Reset
Software upgrade (USB)
Move Menu EnterExit
•  OSD Language: select the language of 
the OSD menu. •  TT Language: select teletext language.
•  Aspect ratio: Auto/4:3/16:9/Zoom1/
Zoom2. The set of available aspects can vary 
depending on the current signal source. •  Blue screen: set on or off blue screen 
activation when no signal. •  Key lock: select ON to lock all buttons on 
the panel. Set OFF to unlock the buttons. •  Reset: reset the parameters to initial 
factory settings.  •  Software upgrade: this option is intended 
for using by qualified technicians only.
Screen setting (only for PC mode)
SCREEN
Auto adjust
Horizontal Pos.
Vertical Pos.
Clock
Phase
Move Menu EnterExit
•  Auto adjust: automatical setting of the 
parameters. •  Horizontal Position: adjust horizontal 
position of the image. •  Vertical Position: adjust vertical position 
of the image. •  Clock: adjust the image frequency 
manually. •  Phase: adjust the phase manually.
Downloaded From TV-Manual.com Manual”