Hyundai H Led15v7 Instruction Manual

LED TV
Руководство по эксплуатации 
Instruction manual
H-LED15V7
ТЕЛЕВИЗОР
ЦВЕТНОГО ИЗОБРАЖЕНИЯ
ЖИДКОКРИСТАЛЛИЧЕСКИЙ (LCD)
 

Table of contents 
Before you start 
Utilization of the product 
Important safeguards
InstallationWall mounting
Stand installation
Connection
Connection Outdoor antenna connection
Other connections
Operation
Control elements  Front panel
 Back panel
Remote controller Changing the battery
General operations Signal sources
Teletext operations
PC screen
OSD operation Channel setting
Picture setting
Sound setting
Timer setting
Option setting
Screen setting
USB operation General operations of file playback...

23
Table of contentsBefore you start
If you want to dispose this product, do not mix it with general household waste. There is 
a separate collection system for used electronic products in accordance with legislation 
that requires proper treatment, recovery and recycling. Please contact your local authorities for the correct method of disposal. By doing so, 
you will ensure that your disposed product undergoes the necessar y treatment, recovery 
and recycling and thus prevent potential negative effects...

Installation
Wall mounting
For wall mounting the back panel of this 
unit is equipped with 4 screw holes (4 mm 
diameter, 100 mm horizontal/vertical spread 
distance). A wall-mount bracket should be 
used for wall mounting (the bracket is not 
included and should be acquired separately). 
Manufacturer is not responsible for improper 
mounting resulting in damage of the unit.
Stand installationPlace the TV on a solid flat surface. Use soft 
material to place over the screen to avoid any 
damage. Put the...

5
Connection
Connection
Outdoor Antenna Connection
Use 75Ω coaxial cable plug or 300-75Ω 
impedance converter to plug in antenna input 
terminal on the rear of the cabinet.
Other connections•  Connect the audio sources (Including 
DVD, VCDR, CAMCORDER and PC) to the 
proper Audio input jacks ‘L’ and ‘R’. •  Connect the video source to the 
Composite video jack by RCA cable. •  If the video source has a SCART output 
jack, you can connect the signal to the monitor 
by the SCART cable (not included). •...

6
Operation
Control elements    
Front panel
1
2
1. Power indicator
2. IR sensor
 
1. Power button
2. MENU button
3. VOL-/LEFT/VOL+/RIGHT buttons
4. CH-/DOWN/CH+/UP buttons
5. TV/AV button
6. RF antenna jack
7. Stereo audio input (white=left; 
red=right)
8. Composite video input
9. Component video input (YPbPr)
10. DC adapter input
11. USB port
12. HDMI input
13. VGA input 
14. PC audio input
15. SCART connector
16. Headphone jack
17. Coaxial output
Back panel
123 45
67
8
9
10 1112 1314 15 1617...

7
Operation
Remote controller (RC)
119
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
1.  POWER button
2.  Number buttons
3.  Zzz button
4.  ASPECT button
5.  VOL+/VOL- buttons
6.  DISPLAY button
7.  ENTER button/cursor buttons (
///)
8.  MENU button
9.  P.MODE button
10. INPUT button
11. 
/HOLD button 
12. /TEXT button 13. 
/INDEX button
14.  /SIZE button
15.  FAV button
16.  FAV- button
17.  Red button
18.  Green button
19.  AUTO button
20.  MUTE button
21....

89
OperationOperation
General operations
•  Press POWER button on the unit or on the 
RC to switch on the power, the indication light 
will be in green color. Press POWER button 
again to switch off the power, and the light will 
be in red color. •  The picture setup, sound setup, previous 
channel can be memorized before you switch 
off the unit. The unit will restart under the 
previous state when you switch on it again. •  Press VOL- button repeatedly to decrease 
the volume; press VOL+ button...

89
OperationOperation
corresponding color page displayed at the 
lower parts of teletext screen.
PC screenSelect the PC input (TV into PC) mode. The 
unit has a VGA jack for a normal computer. 
Connect the monitor with a PC by this jack and 
the unit can be used as the monitor for the PC.
OSD operation
1. Press MENU button to enter the setting 
menu displayed on the screen. 2. Press LEFT/RIGHT cursor buttons on the 
RC or VOL+/- buttons on the panel to select 
setting page. 3. Press DOWN cursor button or...

10
Operation
Picture setting
PICTURE
Picture mode
Contrast
Brightness
Color
Tint
Sharpness
Color temperature
Noise reduction
Move Menu OKExit
•  Picture Mode: Dynamic/Standard/Mild/
User. •  Contrast
•  Brightness
•  Color
•  Tint: adjust the tone of color when your 
system is in NTSC. •  Sharpness
•  Colour Temperature: Medium/Warm/Cool.
•  Noise Reduction: Digital noise reduction 
effect for reducing the video noise level: Off/
Low/Middle/High.
Sound setting
SOUND
Sound mode
Treble
Bass
Balance
Auto...